Wolf 3D Wolf PDF's (CAS, and calibration maps for temp sensors)
12-23-04 | 11:35 PM
#1
Thread Starter
Learned alot | Alot to go
iTrader: (2)
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Wolf PDF's (CAS, and calibration maps for temp sensors)
First one is a S4/S5 CAS wiring (last page iirc)
http://www.wolfems.com.au/support/su...alertech/tech2
Second is the calibration map for the Air temp sensor
http://www.wolfems.com.au/support/su.../airtemp/delco
Last is the engine temp sensor (mine was the bosh 0280, yours probably is too)
http://www.wolfems.com.au/support/su...inetempsensors
Some/All of these i think have been randomly posted, however i wanted to group them together sence wolf information is still not as readily available as other ems's
-Jacob
http://www.wolfems.com.au/support/su...alertech/tech2
Second is the calibration map for the Air temp sensor
http://www.wolfems.com.au/support/su.../airtemp/delco
Last is the engine temp sensor (mine was the bosh 0280, yours probably is too)
http://www.wolfems.com.au/support/su...inetempsensors
Some/All of these i think have been randomly posted, however i wanted to group them together sence wolf information is still not as readily available as other ems's
-Jacob
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 01:04 PM
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 01:42 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 06:24 PM
