Steve Kan Dyno Tune Day So. Cal. April 29th, 30th
#51
Since i got the PFC i want to get most out of it. Will it be worth to tune it with only Intake, DP, Cat Back and SMIC? I would like to keep modification to minimum by not upgrading the injector and fuel pump and add more fuel where the stock fuel system can handle. My car will be mostly street and may see some track day.
Thanks
BC
Thanks
BC
Originally Posted by rzograbian
ummm.... you dont really have anything to tune for unless you are adding more fuel... thats where the most gains are but if you tune like that, it will be more driveable than a base map and a little more power.. not much though
#52
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by BC-FD3S
Since i got the PFC i want to get most out of it. Will it be worth to tune it with only Intake, DP, Cat Back and SMIC? I would like to keep modification to minimum by not upgrading the injector and fuel pump and add more fuel where the stock fuel system can handle. My car will be mostly street and may see some track day.
Thanks
BC
Thanks
BC
if you add a SMIC, then yea.... i think you could squeez a little more than 300 to the wheels like that...
#53
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Originally Posted by BC-FD3S
Since i got the PFC i want to get most out of it. Will it be worth to tune it with only Intake, DP, Cat Back and SMIC? I would like to keep modification to minimum by not upgrading the injector and fuel pump and add more fuel where the stock fuel system can handle. My car will be mostly street and may see some track day.
Thanks
BC
Thanks
BC
1. boost controller
2. A set of secondary injectors to put in the primary location.
3. High flow fuel pump.
These are very simple mods to add, and will yield you, in conjuction with your other mods, and a tune about 100 RWHP.
With a Manual boost controller, these mods will cost you under $300 and can done in a day.
Hope this helps.
#58
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Originally Posted by RX-Heven
Specs?
That comp wheel looks small. It could just be because the housing is so damn big.
What are you hoping for on the dyno w/ pump gas?
That comp wheel looks small. It could just be because the housing is so damn big.
What are you hoping for on the dyno w/ pump gas?
I think Roman is going to tune up to 20PSI with his kit. I am going to do the same. We are guessing, based on the current numbers my car is putting down, that the turbo will be good for 400RWHP at about 15-16PSI, and maybe 460 at the 19-20PSI Range? Just a guess could be a little better, could be alot worse.
#59
MM... April 30 seen to far way. but it will coming very fast if you dont plan ahead.
THe thing to do for my FD3S.
Change engine oil, and filter.
Change plugs. plan to use NGK 10.5 racing
Replace my hight flow cat to mid pipe.
I also would like to know. what is every one's Goal on Steven kan tuning? and what every had under their hood.
I will start mine
I had
TRi point Rebuild motors with 3mm seal( replace most of hard parts) mild street port Stoping making power after 7K
HKS T04Z turbo, Blitz intercooler. Toyota Supra pumps(stock wiring) 1350 RC injectors HKS FPR. PFC. HKS twin power. HKS EVC V
LAST time I had XS tune my car. on 14 PSI. I got 400 WHP I am pretty happy with number because I dont like to be a Dyno gueen or Drag special My goal is reliable Power .
Since my LAST dyno. I had following done
Change HKS T04R turbo to HKS T04Z "EXT A/R 1.0"
HPC hight temp Coating on EXT manifold.
Change HKS Carbon TI to RE Amemiya CAT back.
From this Dyno Tune.
I am looking to get 420WHP at 14-15.5 PSI ( reliable HP) if not I will be happy if along as my car run safe condion ,
Be able to Shoot Fire ball at above 6000RPM
Try to learn some stuff from Steven Kan....
THe thing to do for my FD3S.
Change engine oil, and filter.
Change plugs. plan to use NGK 10.5 racing
Replace my hight flow cat to mid pipe.
I also would like to know. what is every one's Goal on Steven kan tuning? and what every had under their hood.
I will start mine
I had
TRi point Rebuild motors with 3mm seal( replace most of hard parts) mild street port Stoping making power after 7K
HKS T04Z turbo, Blitz intercooler. Toyota Supra pumps(stock wiring) 1350 RC injectors HKS FPR. PFC. HKS twin power. HKS EVC V
LAST time I had XS tune my car. on 14 PSI. I got 400 WHP I am pretty happy with number because I dont like to be a Dyno gueen or Drag special My goal is reliable Power .
Since my LAST dyno. I had following done
Change HKS T04R turbo to HKS T04Z "EXT A/R 1.0"
HPC hight temp Coating on EXT manifold.
Change HKS Carbon TI to RE Amemiya CAT back.
From this Dyno Tune.
I am looking to get 420WHP at 14-15.5 PSI ( reliable HP) if not I will be happy if along as my car run safe condion ,
Be able to Shoot Fire ball at above 6000RPM
Try to learn some stuff from Steven Kan....
Last edited by diyman25; 03-13-05 at 10:39 PM.
#60
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
well, the reason why the inlet for the blitz turbo looks small is because it has a small 5mm cone coming out... if you compare the size of the blade that is showing, its no smaller than a t62... or simillar.... or the 60-1 i belive it was... its just that its a straight lip on there and the other ones have a cone shaped design... thats why when they put the filter on, it looks really big.... who knows!!
#64
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Question for everyone
I need to know if anybody, besides me and Roman, is planning on using race fuel?
If so, please get back to me. I would like to try and have enough on hand for everyone who wants to tune with it. Also, if we buy a large enough quantity, the price will be a little better.
#67
I'll blow it up real good
iTrader: (1)
Joined: May 2001
Posts: 2,390
Likes: 1
From: San Francisco, CA
I need to put a car on the waiting list and/or deposit for Sunday. Street tuning would be fine, but would prefer dyno. Steve has tuned this car before also.
Single turbo 20b fd w/ Microtech ltx-12.
Single turbo 20b fd w/ Microtech ltx-12.
#68
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
Originally Posted by RX-Heven
I need to put a car on the waiting list and/or deposit for Sunday. Street tuning would be fine, but would prefer dyno. Steve has tuned this car before also.
Single turbo 20b fd w/ Microtech ltx-12.
Single turbo 20b fd w/ Microtech ltx-12.
yummmmmmmmmm....... you can have my spot j/k.... bring it out anyway!!!!
just dont break the dyno!! what do you expect HP wise??
so your down for the waiting list:
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven (20B, Single)
2.
3.
4.
#69
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Adding another to the waiting list, only 2 spots left. If anybody else is interested for Sunday, drop me a PM. DO NOT WAIT until the last minute, or we may not be able to secure the dyno, and Steve for that day.
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven (20B, Single)
2.Atihun
3.
4.
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven (20B, Single)
2.Atihun
3.
4.
#70
I'll blow it up real good
iTrader: (1)
Joined: May 2001
Posts: 2,390
Likes: 1
From: San Francisco, CA
I think I may tune on Sunday as well with my vert.
I have water injection and really want to optimize its use which will take some time, maybe more than is available on Saturday. Must use as much water as possible and that requires sizing nozzles during dyno time.
I have water injection and really want to optimize its use which will take some time, maybe more than is available on Saturday. Must use as much water as possible and that requires sizing nozzles during dyno time.
#71
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Okay, we have 2 confirmed for Sunday, one waiting to see if he will have his car together in time. I can't wait to see that 20B on the Dyno.
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven Confirmed
2.Friend of RX-Heven with the 20B, Single Confirmed.
3.Atihun (waiting on parts) not confirmed.
4.
5.
We will continue to add people to the waiting list. Even if we fill up, and just in case! If you are interested please just drop me a PM.
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven Confirmed
2.Friend of RX-Heven with the 20B, Single Confirmed.
3.Atihun (waiting on parts) not confirmed.
4.
5.
We will continue to add people to the waiting list. Even if we fill up, and just in case! If you are interested please just drop me a PM.
#72
Rotary Freak
Joined: Mar 2003
Posts: 2,274
Likes: 0
From: GLENDALE, CA
wohoo!! i paid!!
Hey David, i done with my fuel!! LMK if you want to wrap your up this weekend?? i can start the car if i had a oil feed line!!
Btw, i dont know if i said this before but im recording everyones dyno's...
Hey David, i done with my fuel!! LMK if you want to wrap your up this weekend?? i can start the car if i had a oil feed line!!
Btw, i dont know if i said this before but im recording everyones dyno's...
Last edited by rzograbian; 03-23-05 at 02:34 AM.
#73
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Originally Posted by rzograbian
wohoo!! i paid!!
Hey David, i done with my fuel!! LMK if you want to wrap your up this weekend?? i can start the car if i had a oil feed line!!
Btw, i dont know if i said this before but im recording everyones dyno's...
Hey David, i done with my fuel!! LMK if you want to wrap your up this weekend?? i can start the car if i had a oil feed line!!
Btw, i dont know if i said this before but im recording everyones dyno's...
#74
Thread Starter
I can haz rotary?
iTrader: (1)
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
Adding one more to the waiting list.
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven Confirmed
2.Friend of RX-Heven with the 20B, Single Confirmed.
3.Atihun (waiting on parts)
4.BC-FD3S
5.
I will continue to add people to the waiting list. Even if we fill up, and just in case! Remember only a cash deposit will secure a spot for you. If you are interested or have any questions just drop me a PM. [/QUOTE]
Friday Confirmed AND FULL!!
Jesuscookies
Pandaz-Rx 7
Rzograbian
Maxcooper
Saturday Confirmed AND FULL!!!
RedBaron7
Gazo
Rx-Heven
Jay
Waiting list for Sunday
1.Rx-Heven Confirmed
2.Friend of RX-Heven with the 20B, Single Confirmed.
3.Atihun (waiting on parts)
4.BC-FD3S
5.
I will continue to add people to the waiting list. Even if we fill up, and just in case! Remember only a cash deposit will secure a spot for you. If you are interested or have any questions just drop me a PM. [/QUOTE]