West RX-7 Forum Serving California, Nevada, Arizona, Hawaii

Rotary Reliability in Santa Ana

Thread Tools
 
Search this Thread
 
Old 09-05-08 | 08:23 PM
  #26  
AcidAngel7477's Avatar
We're All Fkd..
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,725
Likes: 2
From: Whittier,CA
of course you would have thrown them away, why? cause you dont know the whole story..oh and by the way? it wasent "junk" it was my stuff and i used to work there, i asked before i brought the stuff to the shop...and it was away from anyone tripping or scratching anything like the "lot o nice car's." they have there..beside's the whole reason the stuff was there was because louie was going to help me do the drivetrain swap the day my t2 diff was stolen..**** happen's and i know that. OH WELL I'LL GET OVER IT, so know your role and shut the **** up..
i shouldent have even said anything in the first place...im sure it will just start ****..

:AA:

Originally Posted by Siverturbo
Well , If I was the owner of the shop and those parts are not from a paying customer I would of thrown them away right away , the reason is simple, a shop is a shop......... not a storage place, unless you're paying them every month for junk storage . If you're not careful with junk....... the shop becomes a junk yard, and junk is dangerous it will scratch cars and make people trip .
I recently went over there and their shop is like 100 times cleaner , which it makes sense since now they're doing a lot o nice cars including 250K built Porches and 3 Rotor 700HP set ups.

Last edited by AcidAngel7477; 09-05-08 at 08:36 PM.
Old 09-05-08 | 09:21 PM
  #27  
socalrotor's Avatar
Rotary Freak
iTrader: (1)
 
Joined: Mar 2003
Posts: 2,839
Likes: 0
From: southbay
Originally Posted by AcidAngel7477
OH WELL I'LL GET OVER IT, so know your role and shut the **** up..
***** please.........roflmao


Originally Posted by AcidAngel7477
i shouldent have even said anything in the first place...im sure it will just start ****..
:AA:
So why did you?
Old 09-05-08 | 09:27 PM
  #28  
Brismo7's Avatar
6 Speed FC

iTrader: (2)
 
Joined: Aug 2005
Posts: 2,258
Likes: 1
From: Orange, CA
i took my car there, all i asked for were new apex seals, i picked up my car a week later with a god damn pissed on engine. I was soo mad. >:^[
Old 09-05-08 | 09:43 PM
  #29  
socalrotor's Avatar
Rotary Freak
iTrader: (1)
 
Joined: Mar 2003
Posts: 2,839
Likes: 0
From: southbay
You waste so much bandwidth you should be charged a fee.
Old 09-05-08 | 10:01 PM
  #30  
AcidAngel7477's Avatar
We're All Fkd..
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,725
Likes: 2
From: Whittier,CA
im over it...and i said it cause i was kinda mad that i dident get to do the swap..i dont know i dont want to say anymore cause it will only result in drama.

:AA:

Originally Posted by socalrotor
***** please.........roflmao



So why did you?
Old 09-05-08 | 10:09 PM
  #31  
socalrotor's Avatar
Rotary Freak
iTrader: (1)
 
Joined: Mar 2003
Posts: 2,839
Likes: 0
From: southbay
what else you need for the swap?
Old 09-05-08 | 10:11 PM
  #32  
AcidAngel7477's Avatar
We're All Fkd..
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,725
Likes: 2
From: Whittier,CA
t2 diff, driveshaft, clutch kit..ya know..the basic's.

:AA:

Last edited by AcidAngel7477; 09-05-08 at 10:32 PM.
Old 09-06-08 | 02:34 AM
  #33  
ivegonemad's Avatar
rx7 killer
 
Joined: Oct 2006
Posts: 1,895
Likes: 1
From: LOS ANGELES, HAWTHORNE
i dont know about how they are in person but the ar i had owned was worken on by 3R and indeed it was a bit of a mess, plus i dont know whether the previous owner(buddy of mine) spent the right money or what not but the work they did was pretty messy, on the other hand i dont know the whole story but from what i heard they were lagging and werent getting nothing done it took months to get it done and hassling them to get it done but this was almost 2yrs ago things might have changed,

havent had a problem with lucky7 at all, has been 2 great years going to them and for a small shop they manage to get cars in and out, pretty fast even when they are busy...

since nelson told me he works there now, thats the only person whom i let work on my car at that shop....but about this pricey thing, IMO the reason people say is because they have no money or wont bother spending it, i mean if you want excellent work spend the money otherwise save it up till you can afford it..or not even try to go fast because it cost money!. i had to vent cuz i just hear whining!

Last edited by ivegonemad; 09-06-08 at 02:48 AM.
Old 09-06-08 | 12:11 PM
  #34  
Archie's Avatar
Right-Wing Extremist Vet

iTrader: (-1)
 
Joined: Aug 2007
Posts: 2,938
Likes: 3
From: Ann Arbor, Dirty Glove
Work is not always commensurate with money, but a lot of rebuilds/work done is based on used parts. Also, developing a rapport with somebody who is going to be working on your car is important. I've heard great things about RR&R and Lucky7. I think Lucky7 is the way to go for a budget build honestly. They've always been upfront on the forum and a lot of guys know them.
Old 09-06-08 | 10:18 PM
  #35  
Siverturbo's Avatar
Platinum Certified tuner
 
Joined: Nov 2003
Posts: 56
Likes: 0
From: Houston TX
Originally Posted by AcidAngel7477
of course you would have thrown them away, why? cause you dont know the whole story..oh and by the way? it wasent "junk" it was my stuff and i used to work there, i asked before i brought the stuff to the shop...and it was away from anyone tripping or scratching anything like the "lot o nice car's." they have there..beside's the whole reason the stuff was there was because louie was going to help me do the drivetrain swap the day my t2 diff was stolen..**** happen's and i know that. OH WELL I'LL GET OVER IT, so know your role and shut the **** up..
i shouldent have even said anything in the first place...im sure it will just start ****..

:AA:
I'm going to be the bigger man here and end this drama, even though you just toll me to shut the **** up when I do know the whole story , (BTW that shut the **** up just cost u the trans mount Louie was going to give you for free)
I'm done with this thread .
Old 09-06-08 | 10:32 PM
  #36  
Siverturbo's Avatar
Platinum Certified tuner
 
Joined: Nov 2003
Posts: 56
Likes: 0
From: Houston TX
Originally Posted by -=Lil Red=-
Hey Nelson,

Jose is our friend and I just spoke to him. He towed his car away from Lucky 7, because he did not want to run the engine before you tuned it. While idling his car on his front driveway unattended, a fuel leak lead to an engine fire.

He did not blame us, because all we did was install the engine into the car, and never ever started it. We did not get to test the car (per owner's request) like we do all of the cars we work on.

So...


You know ,whether this is true or not, I shouldn't have said anything in the first place, it is not usual for me to lower myself to fan dudu thrower( I must of been high on dyno carbon monoxide when I placed that comment) , so I apologize for the comment to you and everyone else at Lucky 7.
Old 09-07-08 | 02:37 AM
  #37  
-=Lil Red=-'s Avatar
R.I.P. Guitarjunkie28
iTrader: (24)
 
Joined: Nov 2003
Posts: 4,370
Likes: 4
From: 626 So Cal
Old 09-07-08 | 11:02 AM
  #38  
AcidAngel7477's Avatar
We're All Fkd..
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,725
Likes: 2
From: Whittier,CA



:AA:

Originally Posted by Siverturbo
I'm going to be the bigger man here and end this drama, even though you just toll me to shut the **** up when I do know the whole story , (BTW that shut the **** up just cost u the trans mount Louie was going to give you for free)
I'm done with this thread .

Last edited by AcidAngel7477; 09-07-08 at 11:31 AM.
Old 09-07-08 | 06:06 PM
  #39  
Archie's Avatar
Right-Wing Extremist Vet

iTrader: (-1)
 
Joined: Aug 2007
Posts: 2,938
Likes: 3
From: Ann Arbor, Dirty Glove
I think Dave got what he needed.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wickedrx2
The Bad & Fugly Members
10
06-10-21 07:28 PM
SCinfidel
3rd Generation Specific (1993-2002)
4
09-08-15 06:36 PM
AXA
Single Turbo RX-7's
8
09-05-15 11:06 AM
Murilli
Midwest RX-7 Forum
0
09-03-15 10:10 AM




All times are GMT -5. The time now is 10:23 AM.