ive never done a header/presilencer on a rotary before, anyone free this weekend to give me a quick hand sometime in the afternoon, whichever day? i will buy ya some lunch or something for helping out. thanks!

 

Take the heat sheild off with 10mm bolts
Take the stock header bolts off with 14mm bolts theres 4 there
Then follow the exhaust down and take off the cats...pretty straigh forward...Don't be afraid just go at it

 

so the easiest way would be to unbolt it from the rotor housing, unbolt it from the "y" pipe and just slide it down as one whole piece?

 

Its easy dude...your putting to much thought into it...There gunna be a pain cause there all rusted and ****..but they will break or break lose..Put some PB blaster rust breaker...It losen rust and harded bolts from not breaking lose..

 

im trying to get the stock exhaust manifold off of the car and i ran into a problem...how the **** do you get to the top bolts of the exhaust manifold? there is some valve assembly looking thing right above the exhaust manifold, can you remove that, for good or what? what is it? or does someone know an easier way of getting the stock header off????

 

one way in one way out...bro...pm me

 

pmed man

 

gheez.

:AA:

 

lol

 

Im sure Ilikeeatpoo will be down to help for a round of airsoft!

 

depends on your location in San diego.. sd is a very large area. but yeah I've been busy working on my own cars for the past two weeks. Still trying to find the wire that is shorting out my reverse.. as well as other problems I have. also being a full time student again isn't helping with my free time lol.

 

im actually in some off base military housing on the outskirt of national city

 

where are the naval housings? BTW Nasty city is ghetto... I've been shot at on 3 different occasions there.



Edit---ok I remember they are towards paradise hills right?

 

yeah they are right off of paradise hills...they are called bayview hills...its not nasty like national city...i hate that ******* town

 

word. come out to our monthly meets then. We have such small head counts in recent meets...

 

wheres it at?

 

The first Sat of every month at Point Loma Bar & Grill

 

you know where the **** its at..don't act dumb hommie

 

that's funny, i remember shooting at the same person on 3 different occasions around that area.

 

Oh **** he about to go holler at my man.

 

lol you know what I remember... I was walking down 4th street minding my own business when I decided to take a shortcut through an alley. Anyway I stumbled unto this gay guy wearing full on make up and a tshirt that read "lvblkjack", he was in the middle of getting gangbanged by a bunch of dudes. I got surprised so I said I was sorry and started walking the other way fast. The gay guy got all pissed off and began to yell. Since "I disturbed the time of his life" (his words not mine) he started shooting and ****. Luckily he had *** in his eye so he couldn't see very well and missed. That was close.... Crazy **** happens at 10 in the morning in Nasty city...

The second time I was walking through the bally's parking lot mid afternoon. As I was passing by this beatup pinto there was the SAME gay guy giving a blow job to some dude. A ****! he saw me and the next thing I know he's shooting again... Missed... Luckily for me he is a real bad shot or had *** on his eyes again.

The last time I was coming out of 7 eleven on highland when the gay guy comes driving by in his pink beat up pinto. He spotted me, turned around and started capping again. For no reason! probaly was still pissed about the last two times.


Hey man I never got around to say that I didn't mean to disturb you. I don't care what you do... I ain't judging it's your life. But both times you just started shooting. So there hope all is forgiven

 

i was shooting blanks

 

very stupid story...

 

lol

 

you read it lol