HID Conversion Kit Special $60.00 Shipped for rx7club.com members
07-27-09 | 03:13 PM
#76
Junior Member
Joined: May 2009
Posts: 33
Likes: 0
From: Toronto, Ontario
Are you using the stock headlight housing/lens?
Here's some pics for all of you that wanted to see it. I gotta say, I'm completely astounded at this kit. For $60, this kit has eliminated all my problems I've had with the stock FD lighting. I've tried different bulbs, silverstars, adjusted headlight pattern, everything and never could get the lighting to look good or even helpful before. This kit is amazing. I can see perfectly now, I can actually drive and see the entire road. I would highly recommend this kit to anyone, especially FD owners cause I've owned a couple so far and they all seem to have the same problem. These are super easy to set up too, I know jack squat about HID systems and was able to have it set up in about 15 mins. Just plug and play like they said. Highly recommend it to anyone.
Here's the pics, the driving ones aren't too good cause I forgot to switch it to antiblur mode, so I'll try to get some more this week. but you can still see the difference. oh and these are the 8000K bulbs.
Here's the pics, the driving ones aren't too good cause I forgot to switch it to antiblur mode, so I'll try to get some more this week. but you can still see the difference. oh and these are the 8000K bulbs.
07-27-09 | 10:13 PM
#77
Hi, Unfortunately your headlights are sealed beams which means the bulbs are sealed with the housing and cannot be replaced by bulb only. Since we do not sell housing, we are unable to provide you with an hid kit. Our hid kits are only plug and play for those who can remove bulbs from the housing only.
Sorry and thank you for your interest. In the future if you change your housing to customs that use H4 or H1, please let us know.
1986 MAZDA RX-7
High & low beam headlamp
H6054 (this means it's sealed beam)
Regards,
Michelle
Sorry and thank you for your interest. In the future if you change your housing to customs that use H4 or H1, please let us know.
1986 MAZDA RX-7
High & low beam headlamp
H6054 (this means it's sealed beam)
Regards,
Michelle
So, just to make sure - if I buy THESE
http://cgi.ebay.com/ebaymotors/86-97...Q5fAccessories
then I can buy your HID kit?
Shawn
07-28-09 | 01:43 PM
#78
Hi,
Yes, the listing says "Comes with projector lens (this item use H4 light bulbs) "
Therefore you can purchase our H4 conversion kit now. THanks!
Michelle
Yes, the listing says "Comes with projector lens (this item use H4 light bulbs) "
Therefore you can purchase our H4 conversion kit now. THanks!
Michelle
So, just to make sure - if I buy THESE
http://cgi.ebay.com/ebaymotors/86-97...Q5fAccessories
then I can buy your HID kit?
Shawn
http://cgi.ebay.com/ebaymotors/86-97...Q5fAccessories
then I can buy your HID kit?
Shawn
07-29-09 | 02:23 PM
#80
Dear All,
For those of you who had trouble going to our website and ordering last night, we apologize for the sudden maintenance that occurred and wasn't able to notify you in time.
Our website and email are all up and running now, please try your order again, if you have any questions, please don't hesitate to email me @ info@hidextra.com.
Thank you for your support and understanding!
Michelle
For those of you who had trouble going to our website and ordering last night, we apologize for the sudden maintenance that occurred and wasn't able to notify you in time.
Our website and email are all up and running now, please try your order again, if you have any questions, please don't hesitate to email me @ info@hidextra.com.
Thank you for your support and understanding!
Michelle
07-29-09 | 04:28 PM
#81
07-29-09 | 09:54 PM
#82
i need somebody here to answer this question really quick...
The second gen FC headlight housing is that on a H4 housing? Im about to buy the headlight housing from ebay for the FC that allows he/she to change the bulb...Let me know thanks for the help...
The second gen FC headlight housing is that on a H4 housing? Im about to buy the headlight housing from ebay for the FC that allows he/she to change the bulb...Let me know thanks for the help...
07-30-09 | 02:14 PM
#84
A Kind Reminder: When PMing me or asking me to confirm bulb type for your car or need a link to a kit, please include the following in your request so I can get you all the information and the link right away. Thank you!
1.) YR MAKE MODEL
2.) What color would you like? (picture at 1st page of this thread)
5000K - White with light yellow tint (Closest to OEM)
6000K - Pure White
8000K - White with light blue tint
3.) Are you looking for bulbs only? or the Conversion Kit?
4.) Other questions?
Thanks!
Michelle
1.) YR MAKE MODEL
2.) What color would you like? (picture at 1st page of this thread)
5000K - White with light yellow tint (Closest to OEM)
6000K - Pure White
8000K - White with light blue tint
3.) Are you looking for bulbs only? or the Conversion Kit?
4.) Other questions?
Thanks!
Michelle
07-31-09 | 12:02 AM
#87
I do plan to replace my current kit with one of these ones on this thread because one of my wires cut in half because of the lack of slack when the headlights pop up, over time the wire pulled and pulled until it split eventually. I was able to do a quick fix using new wire and electrical tape but it's not as effective as I'd like.
Definitely purchasing a replacement kit with Hi & Low from these guys, hopefully upgrade to 10,000K too!
07-31-09 | 05:45 PM
#89
Rotary Freak
Joined: Oct 2002
Posts: 2,401
Likes: 0
From: So Cal
I put a similar kit into my first gen, H4 8000K low beams only not Hi/Low. Here's out it looked on the car. I can take better pics if needed. Just to clarify, because of how close the picture was taken it looks like the entire housing is lit (which would be a hi/low on) but in reality its only the low which can be see from a distance.
I do plan to replace my current kit with one of these ones on this thread because one of my wires cut in half because of the lack of slack when the headlights pop up, over time the wire pulled and pulled until it split eventually. I was able to do a quick fix using new wire and electrical tape but it's not as effective as I'd like.
Definitely purchasing a replacement kit with Hi & Low from these guys, hopefully upgrade to 10,000K too!
I do plan to replace my current kit with one of these ones on this thread because one of my wires cut in half because of the lack of slack when the headlights pop up, over time the wire pulled and pulled until it split eventually. I was able to do a quick fix using new wire and electrical tape but it's not as effective as I'd like.
Definitely purchasing a replacement kit with Hi & Low from these guys, hopefully upgrade to 10,000K too!
07-31-09 | 07:58 PM
#90
when ordering the HID kit could somebody be kinda of enough to let me know where to i put the special code at? Is it after i place the item i wish to order in the cart and then finish up the order toward the end when it ask for my credit info?
07-31-09 | 07:59 PM
#91
08-02-09 | 03:26 PM
#97
Hi,
I believe we do have the H3c, the shorter bulb, but will have to check on the inventory on Monday since that one is more rare and we carry less inventory.
I'll get back to you on Monday. and if we do, you will need to call in for the order since it's not listed online. Thanks!
Michelle
I believe we do have the H3c, the shorter bulb, but will have to check on the inventory on Monday since that one is more rare and we carry less inventory.
I'll get back to you on Monday. and if we do, you will need to call in for the order since it's not listed online. Thanks!
Michelle
08-04-09 | 03:51 PM
#99