Time Slips and Dyno Section is for posting 1/4 mile time slips and dyno graphs

305 RWHP 15psi Pics

Thread Tools
 
Search this Thread
 
Old 11-20-05 | 05:54 PM
  #1  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
305 RWHP 15psi Pics

Steve Kan tuned my care this weekend at CV2 in Deleware, We were going lean in the top end so we stopped here, Steve is awesome tuner (This goes without saying)
Mods
T04 Hybird
Kevin Landers Streetport
Saab intercooler installed in front of the radiator
Water Injection
Microtech LT8
1600 inj all around
Walboro
Attached Thumbnails 305 RWHP 15psi Pics-cv2-dyno.jpg   305 RWHP 15psi Pics-cv-dyno-pic1.jpg  
Old 11-20-05 | 05:56 PM
  #2  
ddub's Avatar
i am legendary

 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
1600cc injectors all around

That's extreme, especially for 15psi and 305rwhp heh. Having any starting issues or flooding with huge primaries like that?

EDIT:
Wait a sec.... you were going lean up top? With 4x1600 injectors!? How?

Last edited by ddub; 11-20-05 at 06:02 PM.
Old 11-20-05 | 06:00 PM
  #3  
Xbladr's Avatar
Senior Member

 
Joined: May 2005
Posts: 639
Likes: 0
From: MA
Does anyone else think that seems a little low for 15psi on a t04 with a streetport? Unless it is a t04 hyrbid like a BNR
Old 11-20-05 | 06:05 PM
  #4  
J-Rat's Avatar
Alcohol Fueled!
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Why? I made 347 on my BNR without a streetport..
Old 11-20-05 | 06:22 PM
  #5  
SmogSUX's Avatar
No money. No love.
iTrader: (12)
 
Joined: Jul 2004
Posts: 2,807
Likes: 0
From: SACRAMENTO
Originally Posted by dDuB
1600cc injectors all around



EDIT:
Wait a sec.... you were going lean up top? With 4x1600 injectors!? How?
how the hell?
Old 11-20-05 | 06:41 PM
  #6  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
A fuel pressure problem I will get a fuel pressure regulator & guage to be sure thats whats happening.

1600 all around was recommened by Rolo Lopez who tuned the car first. I'm not trying to start a pissing contest But... Steve got about 30 mor HP than Rolo. and could have gotten more, but we cranked the boost down until we get this sorted.
Old 11-20-05 | 06:44 PM
  #7  
88t2romad's Avatar
(_8(|)

 
Joined: Jul 2004
Posts: 2,034
Likes: 0
From: Manhattan, Kansas
i dont see the reason in having 1600cc in the primary...?
Old 11-20-05 | 06:55 PM
  #8  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
For the record Steve recommended 720 primarys.
Old 11-20-05 | 06:58 PM
  #9  
88t2romad's Avatar
(_8(|)

 
Joined: Jul 2004
Posts: 2,034
Likes: 0
From: Manhattan, Kansas
thats sounds a lot more appropiate for the 300 hp range, give those a try
Old 11-20-05 | 07:33 PM
  #10  
RXn407's Avatar
Rotary Enthusiast
 
Joined: Sep 2005
Posts: 831
Likes: 2
From: orlando
congrats
Old 11-20-05 | 07:43 PM
  #11  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
Originally Posted by Xbladr
Does anyone else think that seems a little low for 15psi on a t04 with a streetport? Unless it is a t04 hyrbid like a BNR
05-07-05, 07:49 PM #1
Xbladr
Registered User

Xbladr is Offline:
Join Date: May 2005
Location: MA
Posts: 354 WTT: 96 civc

--------------------------------------------------------------------------------

Hey guys I am trying to sell or trade my 96 Honda Civic Coupe


Nuff Said




Its a To4 tybrid, It was originally built by Rotorsports
Old 11-20-05 | 07:51 PM
  #12  
Xbladr's Avatar
Senior Member

 
Joined: May 2005
Posts: 639
Likes: 0
From: MA
Yea i was trying to trade my civic everyone has to start somewhere I now own an 87 TII... all I am saying is I have seen upwards of 250 whp with a stock s4 turbo at only 12 psi i just feel like u should have been making a little more with a t04 I just asked if it seemed low to anyone else. Thats all I am not trying to start a fight i was just throwing it out there
Old 11-20-05 | 08:00 PM
  #13  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
Ok then. I think J Rat is running methanol. I hear alot of people talking # and not posting them
Have you been to the dyno? I was hoping for 320 mark but would rather be on a safe tune.
I retract my flamage Xblader
Johny
Old 11-20-05 | 08:53 PM
  #14  
J-Rat's Avatar
Alcohol Fueled!
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Originally Posted by Johny zoom
Ok then. I think J Rat is running methanol. I hear alot of people talking # and not posting them
Have you been to the dyno? I was hoping for 320 mark but would rather be on a safe tune.
I retract my flamage Xblader
Johny

No Methanol, just alcohol injection.. But methanol is coming!
Old 11-20-05 | 09:09 PM
  #15  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
Steve said I could gain some HP by mixing Alcohol I may be experimenting soon
Old 11-21-05 | 10:15 AM
  #16  
Bacon's Avatar
IRS 4 Life
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
Check your fuel filter, the first time I had Steve tune my car my 2500 mile old filter was clogged. Fuel pressure gauge is one of the best gauges you will ever get. 305 @ 15 psi is not that bad. It may seem low but if you having fuel pressure issues Steve will keep your tune conservative so you don’t blow it beating on the new tune. Like he said he was leaning out up top which keeping the tune conservative would produce lower # but still keep it safe since Steve isn’t right around the corner.

Congrats on the #’s man, hope you enjoy the new tune… now go get a fuel pressure gauge!
Old 11-21-05 | 12:08 PM
  #17  
tjeter's Avatar
Rotary Enthusiast

 
Joined: Apr 2005
Posts: 980
Likes: 0
From: NOVA, Calvert county, Charlotte
hmm is it me or does that one guy that made 295whp at 11 psi on a bnr stage 1 have a freak motor?? he's on stock ports it just still blows my mind.
Old 11-22-05 | 05:26 PM
  #18  
RotaryResurrection's Avatar
Lives on the Forum
iTrader: (8)
 
Joined: Oct 2003
Posts: 11,576
Likes: 26
From: Morristown, TN (east of Knoxville)
Other people who have had t04b hybrid stockers on streetport motors also make right around 300-315 @14-17psi from what I have seen. Sounds about right.
Old 11-22-05 | 07:59 PM
  #19  
jacobcartmill's Avatar
just dont care.
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
what kind of t04 hybrid is it? if its a stage1 it sounds about right...
Old 11-22-05 | 08:18 PM
  #20  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
Originally Posted by RotaryResurrection
Other people who have had t04b hybrid stockers on streetport motors also make right around 300-315 @14-17psi from what I have seen. Sounds about right.
Its a rotorsports Hybird I dont have the #'s on the turbo.


Kevin Thanks again for all your help.

Johny
Old 11-24-05 | 03:50 PM
  #21  
turbine's Avatar
Rotary Enthusiast

iTrader: (1)
 
Joined: Sep 2004
Posts: 906
Likes: 0
From: seattle wa
a different intercooler will bring thoes # up a lil
Old 11-24-05 | 11:28 PM
  #22  
impulsive-rx7's Avatar
I hate this f0rum
iTrader: (2)
 
Joined: Mar 2001
Posts: 728
Likes: 0
From: Leesburg, GA
Johny, does it still wait til 5000rpm for full boost?
Old 11-25-05 | 02:09 AM
  #23  
RotaryResurrection's Avatar
Lives on the Forum
iTrader: (8)
 
Joined: Oct 2003
Posts: 11,576
Likes: 26
From: Morristown, TN (east of Knoxville)
every hybrid I have seen does. I first thought they were being improperly built (some were) but it seems to be a characteristic of them.
Old 11-25-05 | 03:30 AM
  #24  
jacobcartmill's Avatar
just dont care.
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
yeah i think its the matching of the decent T4 wheels and the total dogshit stock turbine wheel (and the clipped ones lag even worse)

full t04b is where its at
Old 11-25-05 | 08:06 AM
  #25  
Johny zoom's Avatar
Thread Starter
Rotary Freak
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,549
Likes: 0
From: Va
Originally Posted by impulsive-rx7
Johny, does it still wait til 5000rpm for full boost?
Well it doesn't just sit and wait But it doesn't get full boost til then. Its not to bad to work with though. If I do a rolling pull in first, it will break the tires loose before I shift to second. I can't Imagine trying to launch a 400 hp rx7, you would have to slip the clutch bad. I don't do launches anyway. I need to get her to VIR though.


Johny



All times are GMT -5. The time now is 03:54 PM.