512 rwhp on 93 pump gas and meth injection *dyno graphs*
02-28-07 | 09:59 AM
#1
Thread Starter
_________________________
iTrader: (3)
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
512 rwhp on 93 pump gas and meth injection *dyno graphs*
Here are my two dyno graphs at around 21 psi of boost on 93 pump gas and 100% methanol injection using coolingmist's progressive controller. I used two nozzles which i think are a M8 and M12. All my other mods are in my garage. It was tuned by Steve Kan.
This is Horsepower and torque, don't mind the lines that shoot back down, i guess the dyno didn't catch the end of the run soon enough
http://www.indyhp.com/pics/512dyno-hpvstq.jpg
this is horsepower and air fuels, i cut off the scale for the a/fs but its 8-18, they are mostly in the low 11s
http://www.indyhp.com/pics/512dyno-hpvsaf.jpg
This is Horsepower and torque, don't mind the lines that shoot back down, i guess the dyno didn't catch the end of the run soon enough
http://www.indyhp.com/pics/512dyno-hpvstq.jpg
this is horsepower and air fuels, i cut off the scale for the a/fs but its 8-18, they are mostly in the low 11s
http://www.indyhp.com/pics/512dyno-hpvsaf.jpg
Trending Topics
03-01-07 | 11:02 AM
#12
Originally Posted by zinx
Thanks guys! I drove it tonight and granted the roads are cold here in indy, but i can already tell traction is going to be a issue this season.
03-01-07 | 11:08 AM
#13
Thread Starter
_________________________
iTrader: (3)
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Originally Posted by Cgotto6
Haha, you think? ****, its an issue for me and I only have 360 at the wheels. Your gonna get all kinds of wheel spin, in almost every gear i bet too.
03-01-07 | 12:23 PM
#15
Thread Starter
_________________________
iTrader: (3)
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Originally Posted by 7-sins
wow, nice numbers. How much is Methanol a gallon. Like $1.50? and how often do you fill up the reservoir?
How often you fill up the reservoir just depends on how often you get into boost, and how long you are in it. I really have had enough seat time to tell at this point how often i will be refilling it.
03-01-07 | 12:55 PM
#16
thats not paint....
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
A little more $$ then I thought, but still beats the pants off paying $13 to go 15 miles or so on C16. I just searched for general Methanol, I didn't know VP made it.
Those reserviors are what.. 1.5 gallons. I am guessing maybe 500 miles or so. City & spirited driving? I would be interested to see what your results are.
Those reserviors are what.. 1.5 gallons. I am guessing maybe 500 miles or so. City & spirited driving? I would be interested to see what your results are.
Originally Posted by zinx
The VP Racing M1 Methanol was about $6 a gallon but it was in a 5 gallon pail. I think if you buy a huge drum of it, its pretty cheap or if you don't buy VP Racings stuff, which i guess is considered some of the best.
How often you fill up the reservoir just depends on how often you get into boost, and how long you are in it. I really have had enough seat time to tell at this point how often i will be refilling it.
How often you fill up the reservoir just depends on how often you get into boost, and how long you are in it. I really have had enough seat time to tell at this point how often i will be refilling it.
03-01-07 | 03:32 PM
#20
Thread Starter
_________________________
iTrader: (3)
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Originally Posted by DrewS2k
Where did you get your methonal set up??
It is their progressive vari-cool setup. Its wild to go up and put your hand on an intercooler pipe right after a dyno run and it feels ice cold to the touch.
03-01-07 | 04:33 PM
#21
Joined: Mar 2001
Posts: 30,580
Likes: 567
From: FL-->NJ/NYC again!
Originally Posted by zinx
I had no traction problems when i was in he low 400s with my previous street ported motor, even in 1st and 2nd.
03-01-07 | 04:41 PM
#22
Thread Starter
_________________________
iTrader: (3)
Joined: Jul 2002
Posts: 1,723
Likes: 1
From: Indianapolis
Originally Posted by GoodfellaFD3S
Hm, at 15 psi with my new 500R setup, I'm not getting solid traction on WOT runs until I shift into 3rd at about 70 mph. This is with good condition 275mm width BFG G Force KDs in the back.....
Its strange, i know. Maybe it was that the turbo spooled so late (especially on the streetport) or that i'm still on stock suspension and it shifts the weight on the back tires, but i definitely hooked up and it was making power.
03-01-07 | 09:50 PM
#23
Racing Rotary Since 1983
iTrader: (6)
Joined: Oct 2001
Posts: 6,136
Likes: 564
From: Florence, Alabama
i pay $1.99 per gallon for methanol in milwaukee. find a circle track and you will find cheap methanol. BTW, i run a 4 gallon fuel cell in my spare tire well.
any questions on the subject go to the Auxiliary Injection section of this board.
zinx, do you have any knock readings?
howard coleman
any questions on the subject go to the Auxiliary Injection section of this board.
zinx, do you have any knock readings?
howard coleman
03-02-07 | 12:29 AM
#24
Originally Posted by KBSRX7
I've been wanting this system for awhile but money is too tight. I think it beats paying $10 a gallon for race gas.
Nice #s Zinx, looks like dynapack software. Glad you got your AI system working effectively. Steve Kan is a good tuner, not doubting Kans' skills at all but I think the #s are off since HP/TQ don't cross at the certain RPM...
Jay7...
Last edited by Jay7 Nyc; 03-02-07 at 12:35 AM.
03-02-07 | 08:53 AM
#25
Joined: Mar 2001
Posts: 30,580
Likes: 567
From: FL-->NJ/NYC again!
Originally Posted by Jay7 Nyc
Nice #s Zinx, looks like dynapack software. Glad you got your AI system working effectively. Steve Kan is a good tuner, not doubting Kans' skills at all but I think the #s are off since HP/TQ don't cross at the certain RPM...
Jay7...
Jay7...