Will 18x10's work on my car?
#1
Will 18x10's work on my car?
Hey all,
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
#3
I have more fun than you.
Joined: May 2002
Posts: 1,078
Likes: 0
From: Sand Key/Clearwater Beach, Florida
Re: Will 18x10's work on my car?
Originally posted by agent712
Hey all,
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
Hey all,
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
No doubt that you posted on the wrong forum...just a matter of moments before it gets moved I'm sure.
David
#4
Re: Will 18x10's work on my car?
Originally posted by agent712
Hey all,
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
Hey all,
I found some Volk GT-P's in 18x10's and +44 offset. I'm just wondering if these will fit on my car? Anybody running 18x10's, and what did you have to do? Any help and input would be great.
Nick
#5
Re: Re: Will 18x10's work on my car?
in the rear positions only, but fronts will rub the fender lips. You'll need to roll the front fender lips for the 45-mm offset to work up front.
Originally posted by twinturboteddy
Yes, it'll work fine.
Yes, it'll work fine.
#7
It's all about offset. Please don't forget. A part of it has to do with the tire size and model you choose as well. But rule of thumb, minimum offset to run up front should be a +50.
Trending Topics
#8
Like this test fitment for example. Foko's wheels on Neevosh's car:
http://www.msnusers.com/RishiesPictu...oto&PhotoID=13
http://www.msnusers.com/RishiesPictu...oto&PhotoID=15
This is the proven "Cooper" Fitment.
http://www.msnusers.com/RishiesPictu...oto&PhotoID=13
http://www.msnusers.com/RishiesPictu...oto&PhotoID=15
This is the proven "Cooper" Fitment.
#11
Originally posted by neevosh
#12
Originally posted by Johnny
neevosh ! I am so proud of you...I fellow Kinesis GUY...finally... 18x10 with a 44mm offset "should" have issue on the front...you will most likely need to get the fender rolled and 2.5 inch coilovers...the rears will probably have no issues...
neevosh ! I am so proud of you...I fellow Kinesis GUY...finally... 18x10 with a 44mm offset "should" have issue on the front...you will most likely need to get the fender rolled and 2.5 inch coilovers...the rears will probably have no issues...
#13
Oh bummer...Still enjoy looking at my K58's...eventhough my car is sitting on stands awaiting $$$ for RZ turbos'.....
I'm going to have to start showing up to GTG's and check out Rishie shop...when I'm back on the road.
I'm going to have to start showing up to GTG's and check out Rishie shop...when I'm back on the road.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 05:40 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 02:26 PM