ARD T2

iTrader: (22)

Hi Guys,

I need to get some answers real quick so please do chime in.

BLACK ENKEI RPF1'S FOR FD3S.....

17x9.0 +45 5x114.3

OR

18x9.5 +45 5x114.3

PLEASE VOTE ONLY IF YOU'D BE INTERESTED IN BUYING A SET IN THE FUTURE, TAKES 4 MONTHS. PRICES WILL REMAIN THE SAME TO MY KNOWLEDGE.

LIMITED RUN TO 10 SETS AT A TIME......

Check out the pics below.....

WHEEL BELOW IS NOT THE FD WHEEL, BUT YOU CAN SEE THE COLOR SETUP



Thanks, Rishie

TRISPEEDFD3S

iTrader: (26)

That **** looks tight! Rishie PM me on the price for the 18's again with the wheels and all associated parts.

owen is fat

eFFin sick man, holy hell that is THE TICKET right there.
man if I had an FD, then I'd go with the 18x9.5 so I could run a 285/30R18 all around.

but if you need to save a few bucks (DAMN 18" tires are $$$) then a 255/40R17 all around on those 17's would be smashing good.

very sick **** man, wow. I love those wheels, black just makes them even better.

TRISPEEDFD3S

iTrader: (26)

And PM on the 17s too...says on the tire chart, the 285/30-18 is for wheels between 10-11. The tire range for the 18s that fit for 9.5 would be 265/35-18, but for that setup when you're actually going 60mph, your speedometer reads 58.9. You can't get 17x9.5 huh? Also the 265/35-18 are WAY cheaper than the 285/30-18.

ptrhahn

iTrader: (9)

I wouldn't obsess on the speedo calibration, I'm running a 275/35/18 rear. The real issue is clearance up front for a 265/35, depending on your set up.

However, it's too bad they can't make you a 10" wheel, since it's a special run anyway. You CAN stuff a 285/30/18 on a 9.5", but they are most at home on a 10". You can run up to 275 wide on a 9.5" though.

ARD T2

iTrader: (22)

Enkei is so hardcore that if they changed the offset on any of their wheels they have to completely redo all their strength testing and so forth. I've already tried that one.

Ok great i'm glad with the response so far.

Rishie

Pred

iTrader: (3)

That's so sick. Any chances of having an even lower offset for a more "flush" look or even staggered sizes?

I'd be in for black!

TRISPEEDFD3S

iTrader: (26)

man, i would hope the 17s would clear bbk like brembo, or ap, etc...the 17s are more friendly with tire choices. Which makes it the IDEAL choice.

aznpoopy

that looks pretty sick

cabaynes

iTrader: (4)

Hey Rishie it's Charlie. Do me a favor and PM me a price for a set of black 18x9.5 +45 and hardware. I know myself and a friend would both be seriously interested.

Thanks buddy

Ltdnismoracer4

I'm pissed... I voted on the original poll on zilvia... I wanted white though.

TRISPEEDFD3S

iTrader: (26)

What?....

Ltdnismoracer4

I guess enkei approached some of their larger distributors and asked them about black verse a matte bronze and gruppeS out of Lakeland California asked us 240 and 350z owners to vote... but I didn't like either and voted for white.

dial8

iTrader: (4)

Dude, +1 for these. Count me in on the first set.

7_rocket

iTrader: (6)

I have these rims.. damn they look badass in black

turBRO240

iTrader: (1)

Id like to see them in 18x9 and 18x10 with lower offsets

dial8

iTrader: (4)

I'd like 17X10 in some lower offsets.

+1. I like'd them in silver, the light grey was okay, but in black? I'm drooling over here, I can't wait.

smg944

iTrader: (34)

+1 those would look nice on my fd. i like the red lettering also. i would be intrested in a set come spring time. with a set of rt-615's.

ARD T2

iTrader: (22)

Hi guys,

OK SO GETTING ANY DIFFERENT OFFSETS OR WIDTHS IS NOT POSSIBLE. THAT'S JUST WAY TOO HARD AS THEY NEED TO REDO ALL STRENGTH TESTING. ENKEI IS NO JOKE. THEY DON'T MICKEY MOUSE AROUND. I'VE ALREADY TRIED THAT WITH THEIR FACTORY FOR PAST 4 YEARS ON AME WHEELS ALONE.

What's the deal?

WHEN DID WHITE COME BACK IN FASHION????? Volk just released their White Time attack too. wtf.....

IS WHITE THE NEW BLACK, hahahahaha.......

BLack was the old GUNMETAL..... lolz....

PLEASE CONTINUE TO VOTE IN THE POLL, SIZING IS CRITICAL IN DETERMING WHAT I'M GONNA STOCK....

I'll handle quotes once I know they're gonna do em. I need to get through step one first.

Thanks fellas,

Rishie

Rxmfn7

iTrader: (4)

Whats the weight on each?

drftwerks

iTrader: (1)

where is time attack WHITE????

link please

0100

Rishie,

Anyway you can get black in 18x10.5 +15?

darksideperformance

iTrader: (1)

I wish you were a little earlier with these, damnit! Here are a few pics of the 9.5X18 45mm with 285/35/18's. Please PM me a price for both the 17's & 18's.

Thanks, mike







295/30/18's actually fit better on the 9.5 than the 285/35's, unless you subscribe to the stretched look

owen is fat

amazing pics man, those are perfect looking wheels/tires on your FD... total business and no joke.

yeah I have 285/30s and 295/30s on 10" wheels and it wouldnt bother me at all to put them on a 9.5" wheel. I'd think those tire sizes should fit a 9.5" wheel very well (I have advan neovas). sure thing the 265's are much less expensive, I think the mfg'ers sell a lot more of that size than the 285 or 295.

TRISPEEDFD3S

iTrader: (26)

So 18s with 285 works! Also, darkperformance you have rolled fenders and coilovers correct? You'd have to have close to stock height?