Picture request. Advan RG2 and RS
01-04-09, 10:49 PM
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: LA, CA
Posts: 3,332
Likes: 0
Received 0 Likes
on
0 Posts
Picture request. Advan RG2 and RS
So far I've only seen one FD with RG2's but I don't know the offset or sizes as it wasn't listed along with the picture. It looked really good, and I really am starting to like these more an more. There are a few sizes available from ADVAN that will fit the FD, but I am having a very hard time finding pictures of them in the actual sizes to gauge what kind of "concave" they would have.
I want to know what kind of concave there would be on the RG2 and RS in the following sizes.
17x9 +35
17x9 +45
17x9.5 +35
17x9.5 +38
18x9 +45
If you have these wheels on your car in any of those sizes, can you please post up a picture along with details and what tire size you are running.
Another request, is just a picture of an FD with 17x9.5 +35 wheels. I've found a picture of the RG's in that size, but I would like to see how they fit on a stock body FD. Doesn't have to be RG's, just that particular size. Again, please post the tire size and if rolling was needed.
I run -2.5* of camber in the front and -1.0* in the rear.
Thanks.
I want to know what kind of concave there would be on the RG2 and RS in the following sizes.
17x9 +35
17x9 +45
17x9.5 +35
17x9.5 +38
18x9 +45
If you have these wheels on your car in any of those sizes, can you please post up a picture along with details and what tire size you are running.
Another request, is just a picture of an FD with 17x9.5 +35 wheels. I've found a picture of the RG's in that size, but I would like to see how they fit on a stock body FD. Doesn't have to be RG's, just that particular size. Again, please post the tire size and if rolling was needed.
I run -2.5* of camber in the front and -1.0* in the rear.
Thanks.
01-05-09, 12:16 AM
#3
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: LA, CA
Posts: 3,332
Likes: 0
Received 0 Likes
on
0 Posts
Yes, that's the FD I saw. And that is actually the NSX I found on google too. The rears are 17x9.5 +35 according to the poster on NSXPrime.
01-08-09, 03:08 AM
#7
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: LA, CA
Posts: 3,332
Likes: 0
Received 0 Likes
on
0 Posts
if only I could find out the size and ET on these wheels.
stock body, similar aggressive alignment and perfect fitment in the fenders.
I'm thinking I might just go with the 17x9.5 +38 and make them fit
. I can fit a bit more wheel in the front than most because of the camber, and the rear will fit regardless. If I can squeeze 255's in there on those wheels I will be one happy guy.
stock body, similar aggressive alignment and perfect fitment in the fenders.
I'm thinking I might just go with the 17x9.5 +38 and make them fit
. I can fit a bit more wheel in the front than most because of the camber, and the rear will fit regardless. If I can squeeze 255's in there on those wheels I will be one happy guy.
Trending Topics
01-08-09, 03:35 AM
#8
All the FEED cars are using their FEED front fenders.
Looking threw my HyperRev books, they say the FEED Spirits track car is running Advan RG1 17x9.5 +24 all around with 255/40/R17 Advan Neova AO48 tires.
Even comparing to some of the other japanese track FD setups, most of them are all running 17x9.5 wheels with a +25-29 offset and using 255/40/R17 tires.
I would go with the 9.5 +35.
Looking threw my HyperRev books, they say the FEED Spirits track car is running Advan RG1 17x9.5 +24 all around with 255/40/R17 Advan Neova AO48 tires.
Even comparing to some of the other japanese track FD setups, most of them are all running 17x9.5 wheels with a +25-29 offset and using 255/40/R17 tires.
I would go with the 9.5 +35.
