RETed

Stay away from those Tanabe and Tein springs.
I've seen pics of both springs, and it looks like they have LESS clearance than stock!
WTF???


-Ted

skizzle84

Spacers, I think so!

90rx7newbie

well if i put spacers in the front there gonna rub the fender,with a 40mm offset wheel.
i'm gonna get a 205/50/17 for the front,i'll see if this works.

The Griffin

You shouldn't have any fender rub issues with a 225/45/R17 tire on a +40mm offset rim,unless there is something wrong with your car.

RETed

You can run like a 1/4" spacer and should still fit under the stock fenders.


-Ted

90rx7newbie

a 1/4 spacer is perfect.no more rub on my springs. the ******* tanabe springs did lower the car but the springs are wider than stock,thats why the rub. soon i'll post some pics.thanks for the input.

90rx7newbie

the car is gonna be painted black very soon
but here is my new wheels
17x7
40mm offset
1/4" spacers in front
tanabe lowering springs
225/45/17 front
255/40/17 rear

TOOSHORT_88

iTrader: (15)

how hard is it to put a 225 40 18 on a 8.5 rim?
and a 235 40 18 on a 9.5 rim?

RE TurboII

iTrader: (2)

225 on a 8.5 is easy, a buddy of mine has 205/45/17 stretched on a 9"

unicorn_squad

not hard. the actual mounting part is actually easier. the only thing that 'could' be hard is getting the bead to seat. but not on that little of a stretch. it should just mount right up. even 225/40 on a 18x9.5 has no problem seating the bead
and fyi, 225 on a 8.5 is actually 'proper' fitment. within the manufacturers reccomended range, and it won't really look stretched at all.

adrenalinboy

looking at puttin on 16x7 with a +34 offset would they fit on my 87 fc?? 4 bolt if it matters

RETed

Width and offset no problem.
Hope you have a base model with the 4-lug wheels?
Bolt pattern is 4 x 114.3mm or 4 x 4.5"...


-Ted

adrenalinboy

yeah i do too lazy to do the 5 lug conversion :P thanks

jdmdavey

iTrader: (3)

17x8 +31 Front 17x9 +38 Rear (will it fit??!) Spacers are no problem..

thanks,
Dave.

Josh18_2k

iTrader: (3)

^ great offset. it'll fit fine. you'll be able to run 235/40 and 255/40 without rolling.

jdmdavey

iTrader: (3)

think it will be a flush offset?

Josh18_2k

iTrader: (3)

yah its about perfect with stock fenders. if you want them to stick out more, theres always the spacers. but they wont be sunk in or anything.

socalrotor

iTrader: (1)

I got a free set of OEM take offs I am trying to set up cheap on my Fc. The offset is high which I know is going to be a problem. Size is 17x8 with a 45 offset. I want to run them on a s5 with some aftermarket springs I cant identifiy,(light blue in color, just a bit darker than cusco blue) and furture tokinco blues. What is everyones recomendation on spacers (size and brand maybe) and max tire widths I can go with. Thanks in advance for any help. If nothing else I will try to sell them. (05 acura TL wheels)

RETed

You need at least a 10mm spacer, but I would recommend something more like 1/2", for up front.
You can runs wheels like that in the rears with no spacers.

Running spacers that wide will require longer studs, since the stock studs are not safe anything over a 1/4" spacer.


-Ted

socalrotor

iTrader: (1)

Thanks alot for the info, I hope to run 225/40's in the front and 245/40's in the rear. Is it save to run a spacer that is so big? I understand I will need longer studs, but 1/2 inch spacer seems scary. Is a bolt on spacer the safest one to use? Any recomendations on where to find the spacers? Thanks again bro!

daved70

Will 18x8 +20, 18x9 +40 fit with 225/40/18, 275/35/18? Also can i go any bigger front and rear. Also I plan on rolling rear fenders

RETed

Fronts will clear the insides no problem, but be prepared to roll those front fenders a LOT.
Overfenders probably an easier way to get them covered?
I'd estimate you need to pull those front fenders like 1/2" outward.

The rears are going to be too tight on the inside with that wide of a tire.
If you drop down to a 245 or a 255 tire, it will be tight but it should clear the insides.

Why would you want to go wider than 275's in the back?
You making like 500 hp?

With the 8.0" up front and that offset, you can step up to a 235 or 245 wide no problem.


-Ted

daved70

No i just like how they look with the wider tires in the back. how wide should i go in the back without affecting performance

mikey4u

Well here is what I found if it can help someone.

I purchased mags as follows

18 X 8 at 38 offset

with a 3mm spacer front so 35 offset (18 x 8.5 DOES NOT FIT UNDER WHEEL WELL ON STOCK SUSPENSION AT 35 OFFSET)

With these mags the largest tire that fits UNDER WHEEL WELL is a P225/40R18 in the front and a 235 with a 18 x 8 will be on top of wheel well or flush meaning you Will hit the inside fender on heavy compression.

18 X 9 at 35 offset

The rear at 35 offset I fit a 255/35R18. This is pretty tight on fender side.You MAY be able to fit a 265/35R18 inside of the wheel well at 38 offset with stock suspension(have not tested this).

And there is my two cents.

teezlr

18x8 40+ all the way around with 235/35/18 tires?