Just what the subject says

does anyone know where i can find a set short of going to japan and trying to locate one...

rishie any hope of getting something similar to this one

the specs are

OZ OEM 17x7.5 5-114.3 +38
(FOR MITSU EVO 6)

pic is here

 

can I put it on a Rx7?

 

yes you can,

teh offset is correct, well pretty close, as stock is +40mm offset.

the bolt pattern also match, the only crappy part is that its only 7.5 inches wide which is .5 inches wider then stock... so no big bonus

 

OK thanks a lot

but I can have 4 for free! so I ll take it!
I can put slick tires on It for the track or do that on mu OEM wheels.

Florent

 

i'm assuming you're talking about a 3rd gen. yes, the bolt pattern is correct, and the offset is pretty darn close, but the stock wheels on a 3rd gen are 8 inches wide.

 

jimmy, i'm talking about for FCs.

i think the offset for FDs are 50 mm offset... correct me if i'm wrong... i'm not sure.

 

didn't know that the bolt pat. was the same for 2nd and 3rd gens....

 

jimmy,

thats ok... btw if you hang around the 2nd gen forum you will see questions every week pop up about can i use 3rd gen wheels on a 2nd gen, all you need are the correct spaces