I need some help B 4 I go nutz....
#1
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
I need some help B 4 I go nutz....
Holy crap....
I recently found out that the Volk lll (the only mesh wheel the wanted) was discontinued...
So I talked to Rishi and he said that he might not even be able to get them for me...
So I started looking for a replacement and now that iv found them i i cant get any damn info on them
.
the wheels are from Work...
I need pic / info / anything you can find...
If anyone has any other ideas of what wheel i could use in place help me out...
Here is a pic of the Volk lll
Here are the other ones from Work im looking at as subs..
<-- Euroline M
<-- VS-MX & VS-XX Chrome
I recently found out that the Volk lll (the only mesh wheel the wanted) was discontinued...
So I talked to Rishi and he said that he might not even be able to get them for me...
So I started looking for a replacement and now that iv found them i i cant get any damn info on them
![Mad](https://www.rx7club.com/images/smilies/mad.gif)
the wheels are from Work...
I need pic / info / anything you can find...
If anyone has any other ideas of what wheel i could use in place help me out...
Here is a pic of the Volk lll
![](http://www.mackinindustries.com/graphics/volk3.jpg)
Here are the other ones from Work im looking at as subs..
![](http://www.donnellans.com.au/wheelsfolder/workwheels/2.jpg)
![](http://www.donnellans.com.au/wheelsfolder/workwheels/7.jpg)
Last edited by Mld>7; 07-23-02 at 12:05 PM.
#2
We do work so just let me know which one ya want. We have a work importer here in San Francisco.
Rishie
I like the VS-XX and the VS MX. Thsoe are sweet. Probably go with the XX for more of a sporty look as the face looks to be flat whereas the MX has some concavity to it or something.
Diameter and widths.
Rishie
I like the VS-XX and the VS MX. Thsoe are sweet. Probably go with the XX for more of a sporty look as the face looks to be flat whereas the MX has some concavity to it or something.
Diameter and widths.
#5
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
60 days?
damn...
well i was looking for prolly 18"/8.5 front and 18"/10.5 back. My car will have around 400whp when Im done so i was hoping to go even wider if its dooable.. maby 18/9 and 18/11 or 12
I dont really know the offset chart to well so heres a shot in the dark..
24 front and 12 back...?
I'm really not sure what that would look like though.
ill try to find a pic of the depth Im going for..
![eek](https://www.rx7club.com/images/smilies/eek.gif)
damn...
well i was looking for prolly 18"/8.5 front and 18"/10.5 back. My car will have around 400whp when Im done so i was hoping to go even wider if its dooable.. maby 18/9 and 18/11 or 12
I dont really know the offset chart to well so heres a shot in the dark..
24 front and 12 back...?
I'm really not sure what that would look like though.
ill try to find a pic of the depth Im going for..
Last edited by Mld>7; 07-23-02 at 02:42 PM.
Trending Topics
#8
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
well im not talking like 18/13...
thats just to show the depth im looking for. Im gonna have around 400whp so i dont wanna be breaking loose all that time...
ill prolly go with 11" max in the back, fornt maby 9" max
thats just to show the depth im looking for. Im gonna have around 400whp so i dont wanna be breaking loose all that time...
ill prolly go with 11" max in the back, fornt maby 9" max
#10
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
ohh man...
yah the tire sizeing is a whole nother issue...
i donno..
what would you say...
Im getting SO-3's prolly 2...4..5..?/40 and 245.....?/35...?......
Thats what I need your help for...
im not 100% sure how to size yet..
yah the tire sizeing is a whole nother issue...
i donno..
what would you say...
Im getting SO-3's prolly 2...4..5..?/40 and 245.....?/35...?......
![Confused](https://www.rx7club.com/images/smilies/confused.gif)
Thats what I need your help for...
im not 100% sure how to size yet..
#14
That's the way to go 9.0" and 10.0". What type of suspension do you have, coilovers?
I'd run 245/35 and 285/30/18. That's the ****. The only two tires I've seen in these two sizes are the Pirelli Pzero and Falken GRB-451. This is the only good Falken and not really expensive. IMO.
I'll look into those offsets but need to know about your suspension first.
A +45 to +50 will work in the front and rear.
Thanks, Rishie
I'd run 245/35 and 285/30/18. That's the ****. The only two tires I've seen in these two sizes are the Pirelli Pzero and Falken GRB-451. This is the only good Falken and not really expensive. IMO.
I'll look into those offsets but need to know about your suspension first.
A +45 to +50 will work in the front and rear.
Thanks, Rishie
#15
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
awwww...
no S0-3's?.. I really had my hart set on those. Maby ill just go with the Pirellis....
whats the closest you can get to that in S0-3's
btw im gonna be running coilovers..
no S0-3's?.. I really had my hart set on those. Maby ill just go with the Pirellis....
whats the closest you can get to that in S0-3's
btw im gonna be running coilovers..
Last edited by Mld>7; 07-24-02 at 09:44 PM.
#18
If you like the VolkIII's, you'll probably like the Gewalt Evolutions:
http://shop.store.yahoo.com/lexusparts/wheelsel.html
Here they are on my car, 18X10 +44 rear, 18X8.5 +44 front. I sold them earlier this year, but want them again so! Wheels were disassembled and the centers painted gunmetal before they were shipped to me.
![](http://mediaservice.photoisland.com/auction/Jul/20027247076392971185248.jpg)
Rishie is right - it will take a couple months or three when ordering custom wheels form Japan like this. Unless someone has a set exactly what you want here, that's just the way it is.
http://shop.store.yahoo.com/lexusparts/wheelsel.html
Here they are on my car, 18X10 +44 rear, 18X8.5 +44 front. I sold them earlier this year, but want them again so! Wheels were disassembled and the centers painted gunmetal before they were shipped to me.
![](http://mediaservice.photoisland.com/auction/Jul/20027247076392971185248.jpg)
Rishie is right - it will take a couple months or three when ordering custom wheels form Japan like this. Unless someone has a set exactly what you want here, that's just the way it is.
#20
I Post Mad Quick Yo!
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
yah i dont cair if the works are light...
they are gonna be my road wheel...
when i hit the track im prolly gonna get ssr comps and for auto x im gonna use the stocks...
but i really like the Misters S2....
i always liked them but now that iv seen a pic of them i want them even more....
they look really mean and intimadating for a road wheel...
just what i was looking for since the rest body will stay stock.
they are gonna be my road wheel...
when i hit the track im prolly gonna get ssr comps and for auto x im gonna use the stocks...
but i really like the Misters S2....
i always liked them but now that iv seen a pic of them i want them even more....
they look really mean and intimadating for a road wheel...
just what i was looking for since the rest body will stay stock.
Last edited by Mld>7; 07-25-02 at 11:58 AM.