Diamond Racing Wheels
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: Milwaukee, WI
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Diamond Racing Wheels
A fellow racer picked up a set of wheels for his CSP miata for $65 each, they are powder coated steel rims, I was wondering if anyone has experience with these wheels on an FD?
Dan
Dan
#2
Junior Member
Join Date: Jul 2001
Location: Fort Walton Beach FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Not sure what FD is. How are you Rx-7 guys mounting the Diamond Wheels? I have the 1" 45 degree aluminum lug nuts from Diamond, but no rear wheel studs. I tried using longer wheel bolts but they didn't seem stable with the 30 degree<
I have 13" Diamond Racing Wheels for my racer, Miata 100mm front pattern and 110mm RX-7 pattern on rear.
I have to say the the wide 7-9" models are much lighter than the fronts 6" I'd say 1.5 to 2lbs with FWD offset. With the Miata the calipers come very close. The rear had no fitment problems, although my suspension pick-ups are almost 4" inboard on the axle.
I have 13" Diamond Racing Wheels for my racer, Miata 100mm front pattern and 110mm RX-7 pattern on rear.
I have to say the the wide 7-9" models are much lighter than the fronts 6" I'd say 1.5 to 2lbs with FWD offset. With the Miata the calipers come very close. The rear had no fitment problems, although my suspension pick-ups are almost 4" inboard on the axle.