a BIG brake kit.
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
a BIG brake kit.
So my buddy here at work is building a Factory 5 Cobra replica...Anyway, he's going totally all out on this thing...I think he's putting in a 514 Ford motor in it...I have no idea how big that it but aparently it's supposed to put down close to 800...Well, he got brakes from Baer...Really nice 6 piston kit...but he paid $4500...doesn't that seem kinda high for a brake package? I think he got fucked.
Last edited by apneablue; 08-10-04 at 11:14 AM.
#2
A 514 is an 8.4L BTW, but those are freaking awesome brakes. $4500 is way too high for me to concider since an Endless brake package w/ 6 piston front, and 4 piston rear brakes are like $3600.
#3
Rotary Freak
iTrader: (10)
That is pretty damn high for front brakes only.... or is that all 4 corners?
Those crossdrilled rotors will be questionable how long they last on the track especially with an 800hp+ engine in a track driven car. I'm surprised if he doesn't blow the tires off every time he goes WOT as he will be tire limited out back handling probably 800 ft/lbs tq in the low RPM range. A 514 is a big motor.... and portly. I assume the shortblock is an iron block?
An all aluminum small block would be a much better choice IMO for optimum handling.
We want progress pics .
-Mark
Those crossdrilled rotors will be questionable how long they last on the track especially with an 800hp+ engine in a track driven car. I'm surprised if he doesn't blow the tires off every time he goes WOT as he will be tire limited out back handling probably 800 ft/lbs tq in the low RPM range. A 514 is a big motor.... and portly. I assume the shortblock is an iron block?
An all aluminum small block would be a much better choice IMO for optimum handling.
We want progress pics .
-Mark
Last edited by gnx7; 08-10-04 at 12:10 PM.
#4
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
My guess is if your friend is building a factory 5 car money is not as much of an option although the cheaper of the two companies when compared to Superformance with that motor I'm sure he's got at least 50-60k wrapped up in... that's a guess. Should be kickass.
-Nic
-Nic
#5
Eats, Sleeps, Dreams Rotary
Thread Starter
The crappy thing is that it's 4500 for just front brakes...He says he thinks he can get done for 40k....I laughed...I was like..****! I almost have that much in my FD and it was already built
I was looking for some of the chassis and body pics but I can't find them...I will make this the official Factory 5 build up thread...He's just doing it weekends here and there and estimates it will take him 2 years to get done....I offered my services but he hasn't needed any help yet. Anyway, i will get some photos and post them when i at his place again
I was looking for some of the chassis and body pics but I can't find them...I will make this the official Factory 5 build up thread...He's just doing it weekends here and there and estimates it will take him 2 years to get done....I offered my services but he hasn't needed any help yet. Anyway, i will get some photos and post them when i at his place again
#6
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I'd think 40k is a bit low. A guy I know has a factory 5 and has pretty close to 50k in it and he's got I believe a 305? or a 302... Another guy I know has a superformance that's got 40k-50k wrapped up in the engine alone. They are badass cars though. Well now I see where you mean 4500 is a lot if it's only front brakes. That does seem like a serious rip. Keep us posted
#7
Eats, Sleeps, Dreams Rotary
Thread Starter
this 6 psiton front 4 piston rear Endless kit, where would I find something like that?...I just did a yahoo search and didn't find much. He's pretty much a net dummy...I had to show him there's a Cobra replica forum he could go ask questions at....I will keep you guys posted.
Last edited by apneablue; 08-10-04 at 02:58 PM.
Trending Topics
#8
I briefly looked at the Alcon components for my 356mmx32mm 6 piston front kit. They are simply way to expensive, If I recall 1500.00 retail per caliper.
I happily settled for the 6 piston AP5555. See the other big brake kit thread in this section for pictures.
1R1
I happily settled for the 6 piston AP5555. See the other big brake kit thread in this section for pictures.
1R1
#9
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by gnx7
..............
We want progress pics .
-Mark
We want progress pics .
-Mark
#11
In all honesty,
Endless currently does not produce a R4 kit for the rear of the FD. I am inquiring with Japan about this. Retail on our 6Pot/R4 kit is $7025.00, all two piece floating disc. Forged two piece calipers, lines, brackets, and pads. The R6/R4 JGTC setup is $7855.00 approx. You can contact www.autornd.com for pricing and availability.
Just our big fron kit is almost $4000.00.
Endless currently does not produce a R4 kit for the rear of the FD. I am inquiring with Japan about this. Retail on our 6Pot/R4 kit is $7025.00, all two piece floating disc. Forged two piece calipers, lines, brackets, and pads. The R6/R4 JGTC setup is $7855.00 approx. You can contact www.autornd.com for pricing and availability.
Just our big fron kit is almost $4000.00.
#12
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Overpriced like all of Baer's stuff. Your friend could have saved himself a ton of money by just picking up a 4-piston 13-inch rotor AP or Stoptech kit. Even a 6-piston 14-inch rotor AP kit is cheaper than that by quite a bit.
#14
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by rynberg
Overpriced like all of Baer's stuff. Your friend could have saved himself a ton of money by just picking up a 4-piston 13-inch rotor AP or Stoptech kit. Even a 6-piston 14-inch rotor AP kit is cheaper than that by quite a bit.
#15
Eats, Sleeps, Dreams Rotary
Thread Starter
Figured I'd do a cobra update...He got 4 piston rear breaks willwood (sp) and then got this MONSTER differential from Ford Racing.
Here are a couple a pics.
If you guys think I should not post this in here you can move this thread to a more appropriate place.
Here are a couple a pics.
If you guys think I should not post this in here you can move this thread to a more appropriate place.
#16
Rotary Freak
Join Date: Apr 2004
Location: Rochester, NY
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
nah man its cool.
I like seeing how much money this guy can dump into a car.
lol.
its kinda silly, but I do see it a lot, guys with loads of money buying the best of the best of the most expensive stuff and spend more time building the car then they ever will spend enjoying it on the road or track. I'm sure the car is gonna rip but there are so many other ways to spend the $$$$$ and still enjoy a FF car you DIY.
I actually wanted to build my own FF car from scratch untill I learned about LS1 swapped FC's and FD's.
I like seeing how much money this guy can dump into a car.
lol.
its kinda silly, but I do see it a lot, guys with loads of money buying the best of the best of the most expensive stuff and spend more time building the car then they ever will spend enjoying it on the road or track. I'm sure the car is gonna rip but there are so many other ways to spend the $$$$$ and still enjoy a FF car you DIY.
I actually wanted to build my own FF car from scratch untill I learned about LS1 swapped FC's and FD's.
#17
Eats, Sleeps, Dreams Rotary
Thread Starter
Strange thing is....I thought he was going to tell me something rediculous for the price on this thing..It was less than $500 and I think the Kazz LSD for the FD is somewhere in the 800+ range. But he does pick the most expensive ****...So crazy..I'm sure he's going to have upwards of 75k in this thing when he's done...The paint he wants is going to cost him about 10k...Crazy crazy.
#18
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by apneablue
Strange thing is....I thought he was going to tell me something rediculous for the price on this thing..It was less than $500 and I think the Kazz LSD for the FD is somewhere in the 800+ range. But he does pick the most expensive ****...So crazy..I'm sure he's going to have upwards of 75k in this thing when he's done...The paint he wants is going to cost him about 10k...Crazy crazy.
Oh, btw, nice t shirt in that first pic
#19
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by GoodfellaFD3S
What the hell does this guy do for living?
Oh, btw, nice t shirt in that first pic
Oh, btw, nice t shirt in that first pic
The guy building the cobra is the VP of our company and he has more money than.....Hmmm, I don't know but it's definately more than I have.
#20
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by apneablue
Yeah, you like that...I think that was the one you gave me...I actually have one for every visit I have made to Gotham in the past 8 months...So I have about 15 shirts now
Originally Posted by apneablue
The guy building the cobra is the VP of our company and he has more money than.....Hmmm, I don't know but it's definately more than I have.
--Rico
#21
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by GoodfellaFD3S
LOL!!!! Admit it, you don't look forward to the trek as much now that I am not there to giffs joo da hugz
So what you are saying is that this dude has enough moneys to buy the head of a neck of the entire eastern seaboard?
--Rico
So what you are saying is that this dude has enough moneys to buy the head of a neck of the entire eastern seaboard?
--Rico
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM