A_Shadow

iTrader: (1)

Will the wheels fit in the back? If not what is the biggest I can go without problems?

I appreciate the help thanks

RX7 RAGE

iTrader: (22)

Did you mean 17x10?

NTIMD8

iTrader: (1)

Yes a 17x10" wide wheel will fit the rear no problem with the correct offset.

A_Shadow

iTrader: (1)

Awesome. Thanks a lot guys.

matty

what offsets are u looking to do? how wide a tire as well?

revvin7Ed

yea there definitely needs to be more info. offset, tires. i think it should fit.

michael_iler

post pics and specs when they are on.

GoodfellaFD3S

iTrader: (213)

My old set of Fikses were 17x10 with a 275/40 out back, +45 offset. No issues, but I do have coilovers and RE trailing arms.

apex_sideway

There's a guy on here named AHarada with a FD that uses 17x10+35 with 255's all around.

matty

a few guys are doing it. i ordered this setup. yet i have my doubts. big doubts. as i was having trouble fitting 8.5 +40 with 235 on the front granted my fender isnt rolled and i plan to do that but we are talking a muhc much bigger setup now.

GoodfellaFD3S

iTrader: (213)

Matty, I ran 245/40s on a 17x8.5 +38 Fikse for many many years with no problems at all. I had the ride height very low too

matty

wierd i guess every car is diff.

Mahjik

iTrader: (1)

Rich most likely had/has his fenders rolled as well. You would have been fine with your fitment had your rolled the fenders. IMO, if you are going with aftermarket wheels, just get the fenders rolled.

GoodfellaFD3S

iTrader: (213)

Nope, stock unrolled fenders.

Mahjik

iTrader: (1)

Then yours must have been bent up already a little more than normal. I grabbed the fender lip every drive when I ran 17x9 +43 with 255's. I even picked a tire that was a little smaller to aid in rubbing but in the end, I had to roll the fenders (which I should have done to begin with).

NeoTuri

iTrader: (2)

I run 275's on a 17x9.5 +43 wheel in the rear.

The tires haven't touched the fenders yet, but I also run 500lb springs back there.

cwhiteteg

I dont see why it wont