what is the best wastegate?
#1
Junior Member
Thread Starter
Join Date: Feb 2001
Location: west palm, fl
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
what is the best wastegate?
I've been recommended to go with a turbonetics racegate... I want to run about 14 psi on a 60-1 hifi.
They are like 400 bucks though.
What wastegates will be good for my setup?
They are like 400 bucks though.
What wastegates will be good for my setup?
#2
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is the best wastegate?
Originally posted by yardee
I've been recommended to go with a turbonetics racegate... I want to run about 14 psi on a 60-1 hifi.
They are like 400 bucks though.
What wastegates will be good for my setup?
I've been recommended to go with a turbonetics racegate... I want to run about 14 psi on a 60-1 hifi.
They are like 400 bucks though.
What wastegates will be good for my setup?
#4
NYC's Loudest FD
I recomend either the Greddy or HKS wastegates, me and my friends have had really bad experiences with the Turbonetics gates, it seems that they don't take the exhaust temp of a rotary too well and they have gotten stuck on some of my friends, and you know what that means. Not to say that Turbonetics wastegates are bad, I just think that they're not good for a rotary, but for a piston motor they work good due to the temperatures not being so high.
#5
Banned. I got OWNED!!!
Join Date: Feb 2001
Location: I was banned for being stupid!!!!
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
im not a big fan of turbonetics gates either. several of my friends piston and rotary alike have had problems with them. ive never heard any complaints from HKS users, including myself and ive also heard great things about the TiAL gates
#7
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
How about TIAL??? I have heard nothing but good things and supposedly they have a 50mm wastegate now, but from the prices you guys posted, the TIAL seems a little more expensive..
Trending Topics
#8
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
turbonetics wastegates/racegates have a tendency to fail due to the temps experienced when being bolted to a turbo fed rotary engine.
The tail one is more than the HKS one cause it is a larger size.
The tail one is more than the HKS one cause it is a larger size.
#12
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
I have the HKS 40mm but I have yet to use it yet, I heard good thinkg about the rest of the HKS wastegates, butin this matter for Enzo250, I know alot of people that like the Tial wastegates. Im either gonna pick up a Tial or a HKS racing wastegate. I also hear alot of people being very very happy with the Greddy wastegates so, Its basically take your pick.
#15
Persona non grata
Do all these wastegates have a standard flange boltup pattern? Reason I ask is cuz I have a Deltagate, and would rather have a HKS or something better ... can the others bolt up to the downpipe flanges I already have?
#16
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BOOSTD 7
Do all these wastegates have a standard flange boltup pattern? Reason I ask is cuz I have a Deltagate, and would rather have a HKS or something better ... can the others bolt up to the downpipe flanges I already have?
Do all these wastegates have a standard flange boltup pattern? Reason I ask is cuz I have a Deltagate, and would rather have a HKS or something better ... can the others bolt up to the downpipe flanges I already have?
#19
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by enzo250
I would Recommend that all high HP RX7's use the Tial 46mm Wastegate. At the moment there is no better wastegate.
I would Recommend that all high HP RX7's use the Tial 46mm Wastegate. At the moment there is no better wastegate.
#21
and why would that be? what makes it superior to the rest of the wastegates out there? or is it just YOUR opinion that it is better than all the other ones you have/haven't tried??????
H.K.S
- Lower Section is cast iron
- Seats are mild steel
- Tops are cast aluminum (untreated)
Problems while running with leaded fuel because mild steel seats will corrode and fuse the valve to the seat... This will create a very dangerous overboost condition... Yes it has happened to me.
Tial:
- Lower section is stainless
- Seats are stainless
- Tops are anodized and very well protected
Tial will not corrode over the coarse of time and will outflow H.k.s.
Funny thing is the smaller tial(40mm) already flows better then the hks. The Tial 46mm is the best wastegate on the market.
#22
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
i am pretty sure my pair of 40 mm wastegates will out flow your 46mm tial and cost less for the pair aswell
its the beauty of having skilled machinist who are mad keen on cars.
its the beauty of having skilled machinist who are mad keen on cars.
#23
Turbonetics's wastegates are designed with a two piece valve that are pressed together to form one peice. That design under high heat always seem to fail! Turbonetics just released a new improved design of wastegate. I still won't reccomend using their wastegates though.
If you're looking for flow, HKS has one of the highest flowing wastegates on the market presently. It's called the GT Wastegate and it features a 60mm valve! Just about all the 2000hp turbo V-8's are using them. The wastegate attaches to the manifold via v-bands!
crispeed
87TII
9.20@150mph 1/4
5.91@118mph 1/8
1.32 60ft
2600lbs
If you're looking for flow, HKS has one of the highest flowing wastegates on the market presently. It's called the GT Wastegate and it features a 60mm valve! Just about all the 2000hp turbo V-8's are using them. The wastegate attaches to the manifold via v-bands!
crispeed
87TII
9.20@150mph 1/4
5.91@118mph 1/8
1.32 60ft
2600lbs
#24
Senior Member
iTrader: (1)
Join Date: Feb 2001
Location: Maryland
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Some people try to tell me that the HKS GT is a bit overkill. But with a well ported motor, and when not running full boost, ill never worry about a boost spike!
Got a hellova deal on it too. Cost me as much as my old HKS 40mm.
Got a hellova deal on it too. Cost me as much as my old HKS 40mm.
#25
Eats, Sleeps, Dreams Rotary
iTrader: (1)
V Bands? mind explaining for the weak minded
Hopefully I'll understand more once I read more of Maximum Boost, up to page 30, im going slow but I only have time in school when i have no schoolstuff to do and I try to understand it the first time around
Already proving very useful :-D
and btw would a rotary go under four stroke or 1/3 stroke or 1 stroke. I was trying to figure that out. I'm talking literally what they would be, not just classification
Hopefully I'll understand more once I read more of Maximum Boost, up to page 30, im going slow but I only have time in school when i have no schoolstuff to do and I try to understand it the first time around
Already proving very useful :-D
and btw would a rotary go under four stroke or 1/3 stroke or 1 stroke. I was trying to figure that out. I'm talking literally what they would be, not just classification