Turbo on a 13b-REW
#1
Newbie
Thread Starter
Join Date: Jul 2001
Location: Federal Way, Wa
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Turbo on a 13b-REW
Hey all, Newbie here (never worked with rotary before)
Couple of things here. I am looking for 325-350 RWHP on a gen 2. I will be updating the car to a 13B-REW, balanced and mildly street ported.
What kind of boost will I be looking to run to get this power, and what turbo do you all recommend for the least leg and best power curve?
Also, on this engine (rebuilt with 3mm apex of course), what would be the highest boost I can safely run (full electronics as needed) withough blowing rotor chunks outa the exhaust? What mods to the engine do you recommend to increase this tolerance?
Props to all for excellent content on the forums!
Fizziesoda
"Sir, we've never gone that fast! I'm not sure if the ship can take it!"
Couple of things here. I am looking for 325-350 RWHP on a gen 2. I will be updating the car to a 13B-REW, balanced and mildly street ported.
What kind of boost will I be looking to run to get this power, and what turbo do you all recommend for the least leg and best power curve?
Also, on this engine (rebuilt with 3mm apex of course), what would be the highest boost I can safely run (full electronics as needed) withough blowing rotor chunks outa the exhaust? What mods to the engine do you recommend to increase this tolerance?
Props to all for excellent content on the forums!
Fizziesoda
"Sir, we've never gone that fast! I'm not sure if the ship can take it!"
#2
Yellow Dragon is no more
12 lbs from the Apex single . . . makes boost as fast as the twins and always makes more power. I would say 17/18 lbs would be pushing this turbo (on race gas).
Thread
Thread Starter
Forum
Replies
Last Post