Single Turbo RX-7's Questions about all aspects of single turbo setups.

some figures on hks t51r spl

Thread Tools
 
Search this Thread
 
Old 04-17-06 | 12:55 PM
  #1  
rx7london's Avatar
Thread Starter
Junior Member

 
Joined: Oct 2005
Posts: 32
Likes: 0
From: london uk
some figures on hks t51r spl

hi im thinking of buying a hks t51r spl for my fd just wondered what to expect of it at 1bar of boost on a ported engine and 1.4bar and also what rpm does it get on full boost at thanks
Old 04-17-06 | 01:35 PM
  #2  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
You'll find all the information you need in this thread https://www.rx7club.com/showthread.p...&highlight=t51
Old 04-23-06 | 05:25 PM
  #3  
dhahlen's Avatar
FD Under Construction =P
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,030
Likes: 24
From: Avondale, AZ
Kan is tuning mine next weekend... we'll see what 23 psi on pump/methanol will do.

What did you make at 23psi previously eric? 527?
Old 04-24-06 | 01:34 AM
  #4  
Rotortuner's Avatar
Undercover
 
Joined: Aug 2001
Posts: 1,983
Likes: 0
From: Ohio
Is the t51r an oil cooled center section only?

CJG
Old 04-24-06 | 06:49 AM
  #5  
dhahlen's Avatar
FD Under Construction =P
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,030
Likes: 24
From: Avondale, AZ
Originally Posted by Rotortuner
Is the t51r an oil cooled center section only?

CJG
Yes
Old 04-24-06 | 09:02 AM
  #6  
LUPE's Avatar
Banned. I got OWNED!!!
 
Joined: Apr 2005
Posts: 5,506
Likes: 0
From: Belleville, IL
Originally Posted by dhahlen
Kan is tuning mine next weekend... we'll see what 23 psi on pump/methanol will do.

What did you make at 23psi previously eric? 527?
around 444whp
Old 04-24-06 | 05:05 PM
  #7  
dhahlen's Avatar
FD Under Construction =P
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,030
Likes: 24
From: Avondale, AZ
Originally Posted by LUPE
around 444whp
Ok you lying ****... what was the power with conversion? 15%? 510hp?

What type of dyno...

No way you made 444hp at 23psi on a kan tune with a KAI you turd.
Old 04-25-06 | 10:17 AM
  #8  
pluto's Avatar
Rotary Freak
 
Joined: Feb 2001
Posts: 1,926
Likes: 0
From: fort worth, tx, usa
The dyno place we used at the time did made 444rwhp but the dyno guy said his dyno reads approx 20% lower than the rest of the dyno. However, due to the big debate on the forum, I think eric decided to use the 444rwhp figure instead. When we were using the dyno pack at the same boost level, I think we made 535rwhp at the same boost(23psi) and 603rwhp@27.5psi.

Steve



Originally Posted by dhahlen
Ok you lying ****... what was the power with conversion? 15%? 510hp?

What type of dyno...

No way you made 444hp at 23psi on a kan tune with a KAI you turd.
Old 04-25-06 | 10:21 PM
  #9  
dhahlen's Avatar
FD Under Construction =P
iTrader: (5)
 
Joined: Jun 2003
Posts: 4,030
Likes: 24
From: Avondale, AZ
I just went for a ride on the KAI doing 3-5psi... MAN THAT TURBO HAS THE SWEETEST DAMN SOUND!!! HOLY CRAP. Can't wait for the tune this weekend...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NEWGENRX7
3rd Generation Specific (1993-2002)
6
06-26-19 12:20 AM



Quick Reply: some figures on hks t51r spl



All times are GMT -5. The time now is 12:22 PM.