Pettit Racing Single Turbo Cool Power Kit!
07-12-06 | 09:50 AM
#1
Thread Starter
Pettit Racing Posterboy
Joined: Jul 2005
Posts: 159
Likes: 0
From: Toronto/Fort Lauderdale
Pettit Racing Single Turbo Cool Power Kit!
Hello everyone!
I thought it would be a good idea to let all you single turbo 3RD GEN owners that we have created a sweet new thermal management system to allow for proper shielding of all your turbo components!
The Cool Power Kit for single turbo setup includes:
- A custom Thermal Barrier Cover, fits around the turbo hot section, it is reinforced with inconel wire, assembled with stainless steel staples and has proven to be a very durable and long lasting part.
- A stainless steel heat shield, fits between the lower intake and the turbo system, is layered with thermal barrier panel. The simple design retains an air space between lower intake and shield, further reducing heat transfer.
- 15 foot roll of Thermal Barrier Wrap, “TBW” for the down pipe with enough material to wrap front section of the mid pipe. (NOTE Downpipe Diameters above 3 inches should use our 20 foot roll)
- 2 Thermal Barrier Panels, “TBP” are precut for the floorboard area just above the hottest section of the exhaust system and are designed to reduce heat transfer in to the passenger foot well and floorboard area. This can make a significant improvement in occupant comfort level.
- 6 feet of high-temp metal tape, which is used to seal the panel edges.
- 3 Stainless hose clamps to secure the wrap
We have installed 6 of these kits recently with nothing but excellent results. After we install this kit, all aspects of the cars feel better!
To read up on all the benefits of this kit, check out this link: COOL POWER!
The price for the kit is $399, But we currently have a group buy in our vendor forum (https://www.rx7club.com/group-buy-center-69/gb-pettit-racing-single-turbo-cool-power-kit-541357/) where they are selling for $300.
If you have any questions, feel free to PM me, or AIM me at Bindon44!!
Thanks!
-Bryan
I thought it would be a good idea to let all you single turbo 3RD GEN owners that we have created a sweet new thermal management system to allow for proper shielding of all your turbo components!
The Cool Power Kit for single turbo setup includes:
- A custom Thermal Barrier Cover, fits around the turbo hot section, it is reinforced with inconel wire, assembled with stainless steel staples and has proven to be a very durable and long lasting part.
- A stainless steel heat shield, fits between the lower intake and the turbo system, is layered with thermal barrier panel. The simple design retains an air space between lower intake and shield, further reducing heat transfer.
- 15 foot roll of Thermal Barrier Wrap, “TBW” for the down pipe with enough material to wrap front section of the mid pipe. (NOTE Downpipe Diameters above 3 inches should use our 20 foot roll)
- 2 Thermal Barrier Panels, “TBP” are precut for the floorboard area just above the hottest section of the exhaust system and are designed to reduce heat transfer in to the passenger foot well and floorboard area. This can make a significant improvement in occupant comfort level.
- 6 feet of high-temp metal tape, which is used to seal the panel edges.
- 3 Stainless hose clamps to secure the wrap
We have installed 6 of these kits recently with nothing but excellent results. After we install this kit, all aspects of the cars feel better!
To read up on all the benefits of this kit, check out this link: COOL POWER!
The price for the kit is $399, But we currently have a group buy in our vendor forum (https://www.rx7club.com/group-buy-center-69/gb-pettit-racing-single-turbo-cool-power-kit-541357/) where they are selling for $300.
If you have any questions, feel free to PM me, or AIM me at Bindon44!!
Thanks!
-Bryan
