obx stainless manifold
01-12-03 | 06:23 PM
#26
no
Joined: Apr 2001
Posts: 2,295
Likes: 0
From: Dallas, TX / Tokyo, Japan currently
XS manifold is pretty much the same as the HKS
it has a T4 flange and pretty much the same construction from what i hear....maybe they are the same damn thing
t66 will fit fine on the HKS manifolds....just on the cast one you will have to dent the frame rail to get the compressor housing to fit like i said in my post above
-Nic
it has a T4 flange and pretty much the same construction from what i hear....maybe they are the same damn thing
t66 will fit fine on the HKS manifolds....just on the cast one you will have to dent the frame rail to get the compressor housing to fit like i said in my post above
-Nic
01-14-03 | 08:20 PM
#27
where can i get the t60-1 for $475?? at that price, with the $175 obx manifold i may be able to complete my single setup for about $1200! why pay 1600 for upgraded twins that have yet to prove anything?
01-14-03 | 11:23 PM
#32
Thread Starter
Rotary Enthusiast
Joined: Aug 2001
Posts: 1,024
Likes: 1
From: Memphis, TN - wishin' i was back in Ft Worth
Originally posted by rotorbrain
good luck getting a good "t60-1" for that price. and the 175 obx manifold isnt the right price. its more like 250 or so. thats what it ends up being.
paul
good luck getting a good "t60-1" for that price. and the 175 obx manifold isnt the right price. its more like 250 or so. thats what it ends up being.
paul
01-15-03 | 02:49 PM
#34
Former Rx7 *****
Joined: Nov 2001
Posts: 4,534
Likes: 0
From: Mississauga
Originally posted by spoolin
getting mine friday, paul. there is a place here that is a garrett distributor and works on large trucks. he had a brand new garrett with a 1.15 divided turbine and .60 compressor that he said he could sell me for $275. with the upgraded wheel and the .70 compressor housing $475. i'll ask him tomorrow if he ahs any more.
getting mine friday, paul. there is a place here that is a garrett distributor and works on large trucks. he had a brand new garrett with a 1.15 divided turbine and .60 compressor that he said he could sell me for $275. with the upgraded wheel and the .70 compressor housing $475. i'll ask him tomorrow if he ahs any more.
01-15-03 | 02:54 PM
#35
I can get practically any Garratt T04 (your spec, T04, To4B, T04e, T04s etc.) for less then $550 shiped, IM for details. BTW, I got the OBX manifold for my FC, and NO I havent checked the fitment yet.
~Mike..........
~Mike..........
01-16-03 | 10:36 PM
#41
Thread Starter
Rotary Enthusiast
Joined: Aug 2001
Posts: 1,024
Likes: 1
From: Memphis, TN - wishin' i was back in Ft Worth
Originally posted by Gearhead
Roy, **** it.. I'm goin' with you up there. I want to see what all is there.
Roy, **** it.. I'm goin' with you up there. I want to see what all is there.
01-17-03 | 12:28 PM
#42
Rotary Enthusiast
Joined: Mar 2002
Posts: 1,049
Likes: 1
From: orlando fl
so anybody have any idea of what turbos do fit on the obx manifold without modification to the manifold or the frame rail? what would be a good sized turbo similar to the esamu rx6 that would bolt right up?
01-17-03 | 03:31 PM
#44
Full Member
Joined: Mar 2001
Posts: 193
Likes: 0
From: Philadelphia
Originally posted by vspecpgt
so anybody have any idea of what turbos do fit on the obx manifold without modification to the manifold or the frame rail? what would be a good sized turbo similar to the esamu rx6 that would bolt right up?
so anybody have any idea of what turbos do fit on the obx manifold without modification to the manifold or the frame rail? what would be a good sized turbo similar to the esamu rx6 that would bolt right up?
01-17-03 | 04:41 PM
#45
Rotary Enthusiast
Joined: Mar 2002
Posts: 1,049
Likes: 1
From: orlando fl
Immanuelrx, yea i saw your pics... looks good... just was wondering because you said your turbo was a bit on the small side right? just wondering what commonly used turbos for the rx would fit... thanks though, pics look great
