Need help asap fuel system question after going single
10-11-11, 08:13 PM
#1
Need help asap fuel system question after going single
I installed the rx7store extreme fuel system, i plan on keepin the charcoal canister so im also keep the factory fuel catch can, my question is do i need to run the purge control soleniod valve?
10-13-11, 12:01 AM
#6
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,909
Likes: 0
Received 123 Likes
on
72 Posts
The purge system (gas fumes) goes from the:
(1) fuel tank to the charcoal canister -->
(2) through the third fuel line to the little purge tank under the throttle body to -->
(3) purge solenoid valve to -->
(4) UIM
Removing the purge solenoid valve , makes the rest of the parts useless.
Remove all except the metal fule line as it can be used later on for fuel.
The hose from the tank to the canister can be tucked up into a body cavity where it will remain dry and out of the way.
(1) fuel tank to the charcoal canister -->
(2) through the third fuel line to the little purge tank under the throttle body to -->
(3) purge solenoid valve to -->
(4) UIM
Removing the purge solenoid valve , makes the rest of the parts useless.
Remove all except the metal fule line as it can be used later on for fuel.
The hose from the tank to the canister can be tucked up into a body cavity where it will remain dry and out of the way.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post