how big is your fuel pump and what brand?
#1
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Mar 2004
Location: springfield MO
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
how big is your fuel pump and what brand?
I was wondering what fuel pumps you guy are runnig with your single turbos, and why your runnig it? the reason im asking is because i would like to use this as a referance for puting my turbo kit together. also what size ex. 255 ect.
#5
Perpetual Rebuilder
![](/images/misc/20_year_icon.png)
I have heard bad things about the bearing on walbros. I have a cosmo pump pushing fuel to my 720/1680 injectors. It gets me to 16psi boost (which requires about 60 psi fuel pressure) on my t04S with no pressure drop problems. I think this is about 375rwhp range. I have also run the supra TT pump and it delivered well also until it died
.
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
Trending Topics
#12
Aeromotive A1000 with a constant 12V relay as well, but i'm looking into getting the Aeromotive Fuel Pump Controller to control the pump.
#13
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Mar 2004
Location: springfield MO
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by badfish229
What are your specifications for your project, FD3SR1?
Apex-i power fc
1600cc
850cc
and all the other goodies intercooler ect.
#16
Rotary Freak
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FD3SR1
im looking for around 450rwhp +
#18
Senior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Oct 2002
Location: San Ramon CA 94583
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Aeromotive Eliminator
![](https://www.jegs.com/photos/02711104.jpg)
It's shelf-warming right now, as much of the car as I restore. I'm considering a speed controller.
![](https://www.jegs.com/photos/02711104.jpg)
It's shelf-warming right now, as much of the car as I restore. I'm considering a speed controller.
Last edited by jhillyer; 08-05-04 at 11:15 PM.
#19
aeromotive a1000, an lines, 850primaries, 1600secondaries, sx regulator. Pt 67gtp,
apex frontmount i/c converted air to water. Start tuning soon. Running 9.7 rotors,
stock ports[trust me] want close to 500rwhp @ 22psi- will post results.
apex frontmount i/c converted air to water. Start tuning soon. Running 9.7 rotors,
stock ports[trust me] want close to 500rwhp @ 22psi- will post results.
#24
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2001
Location: Canada
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
My new Aeromotive Eliminator takes My T04R up tp 25 PSI and I have below 90 % duty on the PFC. The Aeromtoive A 1000 is not near the pump the Eliminator is hence it is more expensive and it is also more quite.
#25
Glug Glug Glug Burp
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 93FD3S
Any pointers on how to set this up? Thanks
The pictures are on page two.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)