HKS T51r Bridge port Project
#28
look at what this guy had to do to clear the E&J set up, and he has a low profile hat on there
https://www.rx7club.com/interior-exterior-audio-26/pics-my-fd-being-painted-778349/
https://www.rx7club.com/interior-exterior-audio-26/pics-my-fd-being-painted-778349/
the e&J with the jw intake wont fit on the fd or fc.. its close but needs some modification.. sticks out about inch and a half. Maybe his lower intake manifold is shorter then the jw intake and thats why it fits here..
Roan whats this setup you have.. price? pm me. e&j quality is hard to beat.
#29
#30
Senior Member
Join Date: Jun 2006
Location: miami fl
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
anthony i don't think it will fit either, i know for a fact the E&J TB with the JW lower intake wont clear a fd hood.
anthony, if you're intrested in that intake or TB let me know i got a set comming in and its cheaper that the E&J/JW combo. it also comes in a semi perif configuration as well, no mods needed
anthony, if you're intrested in that intake or TB let me know i got a set comming in and its cheaper that the E&J/JW combo. it also comes in a semi perif configuration as well, no mods needed
#31
They might as well thank E&J for what little they found out because all the new stuff is not going to those ******** anymore. It takes two to play a game. Let's see what they say when their **** ends up on the market for a 10th of the price they sell it for.
Wow, this is incredible. This is a true copy of the original E&J Throttle body. Is amazing how the top notch stuff made is strickly a copy. You want to see top notch go to eastcoastparts.com. The least they could of done is make some type of change or improvements but i guess they dont have what it takes.
Let's see what happens when the tables are turned!
Last edited by crispeed; 12-05-08 at 11:00 AM.
#33
7s before paint!!!
iTrader: (2)
It's sad that they can't come out with any original products but at least they picked the best one to copy. With the way E&J are coming out with new products everything is going to be a copy soon
To the OP, beautiful work.
To the OP, beautiful work.
Last edited by 13B-RX3; 12-05-08 at 11:50 AM.
#34
any idea when this is coming out? prob not in the near future and I dont think I can wait that long.. lol.
#35
look at what this guy had to do to clear the E&J set up, and he has a low profile hat on there
https://www.rx7club.com/showthread.php?t=778349
https://www.rx7club.com/showthread.php?t=778349
I chose to work with a welder instead of fiberglass.. Much easier... lol..
Last edited by enzo250; 12-05-08 at 12:53 PM.
#36
#39
Full Member
Thread Starter
Guys i can see where you are all coming from but unfortunately this is the way of the world. Rohan has copied a good product however has made some subtle changes Why reinvent the wheel? The quality is definatly not an issue. And for you other people running your mouths, rohan is at the for-front of rotary development. It was only a few years ago that he took all his 4 rotor development stuff over to the PRI show only to find that his container never made the return voyage, countless hours and money gone only to be copied. He was also approached by a vendor here in Australia to be a reseller of his stuff only to find that the product he gave as stock was actually sent over to china to be copied. unfortunately money is money business is business.
And just back to the topic, if anyone is interested from the base of the manifold to the top of the nut holding the top hat on is 370mm
dave
And just back to the topic, if anyone is interested from the base of the manifold to the top of the nut holding the top hat on is 370mm
dave
#40
I think its your intake manifold that is shorter and thats why it fits.. how bout from the first top bolt that holds your intake manifold to the top of the hat. The E&J/jw combo is 10 inches or 250.4mm... which does not fit an fd how are you getting 370mm to fit. ??
#41
RX-Parts
iTrader: (3)
I'm not gonna comment on who coppied what cause in my eyes the E7j is a great product that was an evoloution of the jay teck set up, that was an evoloution of the old accel product that is all based off a holley carb design. if the guru product is a better version of the E&J or just a good quality copy, then whatever. it is what it is. anthony, i have a intake manifold and tb/ hat set up comming in from rohan in the next week or 2. if you wanna check it out let me know.
#42
Guys i can see where you are all coming from but unfortunately this is the way of the world. Rohan has copied a good product however has made some subtle changes Why reinvent the wheel? The quality is definatly not an issue. And for you other people running your mouths, rohan is at the for-front of rotary development. It was only a few years ago that he took all his 4 rotor development stuff over to the PRI show only to find that his container never made the return voyage, countless hours and money gone only to be copied. He was also approached by a vendor here in Australia to be a reseller of his stuff only to find that the product he gave as stock was actually sent over to china to be copied. unfortunately money is money business is business.
And just back to the topic, if anyone is interested from the base of the manifold to the top of the nut holding the top hat on is 370mm
dave
And just back to the topic, if anyone is interested from the base of the manifold to the top of the nut holding the top hat on is 370mm
dave
The guy tried with the Billet rotors and failed. Let's see how his TB's do. I'm not even going to mention what Apex seal he copied!
BTW. Your setup looks very good but you got a lot of parts in the combination proven not to work. Good luck anyway.
#43
I'm not gonna comment on who coppied what cause in my eyes the E7j is a great product that was an evoloution of the jay teck set up, that was an evoloution of the old accel product that is all based off a holley carb design. if the guru product is a better version of the E&J or just a good quality copy, then whatever. it is what it is. anthony, i have a intake manifold and tb/ hat set up comming in from rohan in the next week or 2. if you wanna check it out let me know.
You might as well erase my # from your phone!.
#44
RX-Parts
iTrader: (3)
i can be an ******* at times but this is ther first douchebag remark i've ever gotten
Last edited by SPEED_NYC; 12-06-08 at 12:59 AM.
#46