GroundZero Motorsports GT42R - 668 RWHP
#26
Senior Member
Join Date: Mar 2001
Location: aloha,OR.Usa
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Sean made this manifold at Aspec, ask him on length. We run one HKS 60mm wastegate, and all the manifolds are stock portmatched only. We hope the motor will last a summer
street driving no drag racing, but 3rd gear wont be as lucky.
street driving no drag racing, but 3rd gear wont be as lucky.
#32
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Ralph,
BAD ***, bro! Congrats....I know what it takes to get to that point and its not easy. Huge accomplishment. Im considering your LIM as well. Again, huge thumbs up on your part. Can't wait till spring to see what this power does on the track!
Ernie
PS.
One other thing I noticed. Since your on a mustang dyno, they usually read quite a bit lower than a dynojet dyno depending on how you have it setup. So you could be putting down closer to 700rwhp!
BAD ***, bro! Congrats....I know what it takes to get to that point and its not easy. Huge accomplishment. Im considering your LIM as well. Again, huge thumbs up on your part. Can't wait till spring to see what this power does on the track!
Ernie
PS.
One other thing I noticed. Since your on a mustang dyno, they usually read quite a bit lower than a dynojet dyno depending on how you have it setup. So you could be putting down closer to 700rwhp!
Last edited by ErnieT; 12-05-05 at 05:03 PM.
#34
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by 88fc3sw/HX83
Anyone who investest a lot of money into their project will have a lot of HP. It only takes $$$$
Congrats Ralph, that is a whole lotta power! I admire your persistence.
#36
Banned. I got OWNED!!!
Originally Posted by GoodfellaFD3S
It's not that easy my man.
Originally Posted by Ralph
Does anybody know what we can do to the transmissions
Last edited by 88fc3sw/HX83; 12-06-05 at 12:18 AM.
#38
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
If it were SO easy to do, there would be more than just a handfull of people that made more than 600rwhp. And it doesn't cost that much. Its knowing how to do it, R&D, and trial and error.
#40
Banned. I got OWNED!!!
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 88fc3sw/HX83
Then tell us what makes it difficult? I'll tell you right now, if I had the funds, I would have had the most powerfull rotary EVER built! I would take a trip down to NZ, Aus, Japan, & Puerto Rico! Get all the necessary ingrediants and TADA! <-- I would know how to accomplish this because I google...lol
You're right, it's easy.
#41
Rotary Enthusiast
iTrader: (1)
Originally Posted by GroundZero
This is with our new Lower Intake Manifold, 850cc Primaries and 4x1600cc Secondaries @ 42psi base. We were running 77% duty cycle at full boost.
Rick
Rick
Last edited by 13btnos; 12-06-05 at 11:12 AM.
#42
It wasn't me!!
iTrader: (1)
Join Date: May 2004
Location: Cayman Islands
Posts: 1,189
Likes: 0
Received 0 Likes
on
0 Posts
I've spoken to a couple of guys in austrailia and other well known rotary heads and the stock gear box in the FD's should be able to hold together on to that kinda power(as long as the gear box hasn't been abused)It's serious torque and misalignment, also bad shifting that distroys a box. We had the same issues with the mustangs a couple years back too. People were saying that the stock t5's couldn't handle high power and big launches, that was until they saw one run 9's with a stock gear box.
Other's might not agree but thats what this forum is for, knowledge.
Keith
Other's might not agree but thats what this forum is for, knowledge.
Keith
Originally Posted by Xcessive
Does anybody know what we can do to the transmissions to hold up at this power level?
Cryo? Heavier gears?
Cryo? Heavier gears?
#46
Banned. I got OWNED!!!
Damm you guys are THICK! LISTEN: If I had the Best of the BEST, why wouldn't it be easy? I wasn't saying that I would do it myself, I said IF I HAD THE FUNDs!!! I would do some research and hire the Best of the BEST in the WORLD! I would then have the best Builder & TUNER that would build and tune my engine.
NOW TELL ME WHATS SO HARD? I'm beginning to think that some of you guys just like to argue!
NOW TELL ME WHATS SO HARD? I'm beginning to think that some of you guys just like to argue!
Last edited by 88fc3sw/HX83; 12-06-05 at 07:08 PM.
#48
NorCal 7's Co-founder
Why hate on Ground Zero 88FC3S? Can't you just give them what they deserve, which is a congratulations. Instead you want to slap them in the face. Grow up.
#49
Banned. I got OWNED!!!
I'm not hating, I like Ralph & GroundZero and I'm proud that they're in the same state that I'm living in...hell, Ralph lives a few blocks from me! I'm just stating a factual opinion!....stop trying to instigate ****!
Last edited by 88fc3sw/HX83; 12-06-05 at 07:41 PM.
#50
Ok Guys it s Bryan Ralphs son its time i post some pics. So i will just get to it......
Yeah there 20s............
I have more pics these are just a teaser also i will be posting vids of the cars ect....
Bryan
GroundZero
Yeah there 20s............
I have more pics these are just a teaser also i will be posting vids of the cars ect....
Bryan
GroundZero
Last edited by GzeroS14; 12-06-05 at 08:13 PM.