HEy guys,
I'm pretty new to this Turbo tuning stuff so I need some general info where I can read about tuning.
I blew my engine 2 weeks ago and I guess my car was running too lean. Anyways, I'm pushing 15 psi but then somedays it could creep up to 18psi.
I'm not sure what turbo I'm using or what kit it came from, but supposedly it was just a drop in kit.
I'm getting my motor rebuilt and I need to know some tuning so I can tell my tuner what i'm looking for.
Any links or suggestions is welcomed. thanks

 

We would need to know about:

(1) what type of porting the engine has
(2) size of primary and secondary injectors
(4) fuel system mods
(5) intake and exhaust mods
(6) type of ecu

 

all that would be great!

 

If your tuner is a real tuner you shouldn't have to tell him anything. He should be able to look at your turbo and fuel system and tell you what YOU need.

The only thing you might want to tell him is how much boost you want to run. Try to run up to fifteen pounds of boost for safety on pump gas.. Get a air/fuel ratio gauge so you will know if its running lean or not.

To learn how to tune you will first need to know he basic stuff like fuel injection and how an engine works.

check out: www.turbofast.com.au

Hope this helps.