A detailed look at the most advanced long runner turbo manifold available for RX7's.
#1
A detailed look at the most advanced long runner turbo manifold available for RX7's.
Hey guys,
I wanted to make available this PDF we've put together for everyone to take a peek at if it interests them. Would love to have some discussion or even answer questions.
We're proud of this product, and we have spend so much time perfecting it to be the way we want it. It's all in the small details, and we're boarder line arrogant about them. 321 stainless, billet collectors, SO good. We have a lot of new shops getting on board too.
Another fact that's hard to look past is that this product is build by us, in Canada. That means anyone from the USA is buying these manifolds for 30% less, just for exchanging your money to canadian. It makes these manifolds obnoxiously affordable, even more than they are already.
I've attached the PDF in this post, and here's a link to the Vendor section that is a quicker view of all of the facts. Appreciate all the support in the last few months!
https://www.rx7club.com/vendor-class...npipe-1085128/
I wanted to make available this PDF we've put together for everyone to take a peek at if it interests them. Would love to have some discussion or even answer questions.
We're proud of this product, and we have spend so much time perfecting it to be the way we want it. It's all in the small details, and we're boarder line arrogant about them. 321 stainless, billet collectors, SO good. We have a lot of new shops getting on board too.
Another fact that's hard to look past is that this product is build by us, in Canada. That means anyone from the USA is buying these manifolds for 30% less, just for exchanging your money to canadian. It makes these manifolds obnoxiously affordable, even more than they are already.
I've attached the PDF in this post, and here's a link to the Vendor section that is a quicker view of all of the facts. Appreciate all the support in the last few months!
https://www.rx7club.com/vendor-class...npipe-1085128/
#3
Our Billet Collectors are almost finished up and ready for a group buy. Machined from a solid block of 304 stainless. They give the ability to perfectly taper from the primaries to the T4 inlet, standard sch40 pipes taper is limited to it's own wall thickness. Billet is also twice as strong as any cast or welded collector, ever.
Trending Topics
#10
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
The billet flange is a great idea, but I'm looking at that vagina area between the runners thinking "Gee, that will be fun to TIG". 1.5" of tungsten extension, a zillion CFM and a gas lens on a small WP17.
#11
Rotary Freak
Originally Posted by kevinbtz
So I take it your not going to sell just the flange?
Originally Posted by Aaron Cake
small WP17
#16
For those who don't want or need the Billet Collector, all non Billet Series Manifolds now come standard with 3D CNC flanges on both ends. Perfectly symmetrical, one pass weld, and high flow. This is a huge upgrade and we aren't changing the price at all. Still only $720 USD.
A close up of the newly revamped slotted lower engine flange that allows slick installation and removal.
A close up of the newly revamped slotted lower engine flange that allows slick installation and removal.
#17
Used my Potato for pictures.. Better ones when I have a wee bit more time.
À
Close up of the Billet Series
Here's some of the process of machining the S300 Series Borg Warner Turbos to accept a 3"vband setup, instead of the Marmon Flange. Included in all of our kits, and optional on all turbo sales.
Here's a time lapse of welding up some non-billet series Collectors. Lots of welding time into these manifolds.
Here's some of the process of machining the S300 Series Borg Warner Turbos to accept a 3"vband setup, instead of the Marmon Flange. Included in all of our kits, and optional on all turbo sales.
Here's a time lapse of welding up some non-billet series Collectors. Lots of welding time into these manifolds.
À
Close up of the Billet Series
Here's some of the process of machining the S300 Series Borg Warner Turbos to accept a 3"vband setup, instead of the Marmon Flange. Included in all of our kits, and optional on all turbo sales.
Here's a time lapse of welding up some non-billet series Collectors. Lots of welding time into these manifolds.
Here's some of the process of machining the S300 Series Borg Warner Turbos to accept a 3"vband setup, instead of the Marmon Flange. Included in all of our kits, and optional on all turbo sales.
Here's a time lapse of welding up some non-billet series Collectors. Lots of welding time into these manifolds.
#22
More goodies.
A view of the CNC Ported Flanges that are standard on all Non-Billet Manifolds
V-Band weld on the downpipe
Flex Pipe Weld
Inside view of the downpipe, showing the penetration and back purge. Anything less than this is unacceptable to us.
Joint prep, shows how thick these primaries are.
Every sealing surface is sanded to perfection.
A view of the CNC Ported Flanges that are standard on all Non-Billet Manifolds
V-Band weld on the downpipe
Flex Pipe Weld
Inside view of the downpipe, showing the penetration and back purge. Anything less than this is unacceptable to us.
Joint prep, shows how thick these primaries are.
Every sealing surface is sanded to perfection.
#24
I can make you one no problem, but it won't be billet. Need a larger order. john@gleasemanufacturing.com
#25
More pictures for you guys! These manifolds are slowly making their way into amazing builds all around the world! Some cool stuff coming up soon, stay tuned.
Every flange is meticulously prepped for welding.
NSFW
A look at the entry ports.
Welding up a batch of CNC Ported T4 Flanges. (For the non-billet series)
Primary Welds
S366 with a 4" Stock Location downpipe mocked up.
Back Purging
Every flange is meticulously prepped for welding.
NSFW
A look at the entry ports.
Welding up a batch of CNC Ported T4 Flanges. (For the non-billet series)
Primary Welds
S366 with a 4" Stock Location downpipe mocked up.
Back Purging