Critique my GT35R Dyno sheet
01-09-13 | 09:49 PM
#51
Thread Starter
ErnieTKiLLA
Joined: Feb 2002
Posts: 972
Likes: 0
From: new york
Fail and Fail.
As this is your first post it indicates you didn't read any rules. As the rules serve to help increase your post count.
As you can see this thread is from SIX YEARS ago. I honestly doubt the numbers in the OP's post are even accurate. XLR8 just made 450ish on a t3 1.06 Gt35r and he had AI and 23Psi on a street ported motor.
Last of all. A GTX3071R would not be an ideal turbo choice. A T3 .82 housing is way too small for a rotary. It also has a 60mm turbine wheel. Also way to small. A GTX3071R would be good for MAYBE 375 HP on HIGH boost. After 6000RPM I imagine it would choke itself to death.
Matt
As this is your first post it indicates you didn't read any rules. As the rules serve to help increase your post count.
As you can see this thread is from SIX YEARS ago. I honestly doubt the numbers in the OP's post are even accurate. XLR8 just made 450ish on a t3 1.06 Gt35r and he had AI and 23Psi on a street ported motor.
Last of all. A GTX3071R would not be an ideal turbo choice. A T3 .82 housing is way too small for a rotary. It also has a 60mm turbine wheel. Also way to small. A GTX3071R would be good for MAYBE 375 HP on HIGH boost. After 6000RPM I imagine it would choke itself to death.
Matt
01-10-13 | 04:53 PM
#53
We can also note that all dyno's are different. Enzo also made 500whp on my turbo at my boost level. I don't doubt the numbers, as there are many many variables when it comes to dyno'ing a car and producing a "number".
Additionally, the proof is in the pudding. A 10.6 is definitely getting it. I also feel with the right tires and launch my car would run 10's as well. It breaks loose my 285 street tires at 60mph in 3rd..... so yeah.
Additionally, the proof is in the pudding. A 10.6 is definitely getting it. I also feel with the right tires and launch my car would run 10's as well. It breaks loose my 285 street tires at 60mph in 3rd..... so yeah.
01-11-13 | 01:56 AM
#54
Junior Member
Joined: Mar 2008
Posts: 3
Likes: 0
From: Las cruces nm
Ok thanks I'm cool..... Anyway I have fd3s completely stripped nice single turbo and a list a mods that will take forever so.... Yea idc. I'm thinking about the smaller turbo for better response. Don't care about crap or bashing that's why no one likes forums noob :p
01-12-13 | 10:09 PM
#55
01-18-13 | 09:49 PM
#56
https://www.rx7club.com/single-turbo...3-dyno-746924/ Umm those were inflate #'s read post 8 were enzo himself claims he had already converted the #'s. So Yep they are not accurate.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
