boost controller questions. SBC id II
04-22-03 | 08:57 AM
#26
Thread Starter
in slow, out fast!
Joined: Apr 2002
Posts: 1,388
Likes: 0
From: Florida
if i run it in off mode it still overboost. i have tried both auto and manual mode. manual seems to work better. its gotta be something i am just no seeing. something small i overlooked. i will take the whole thing out again this weekend and reinstall it. its gotta be something dumb that i didnt notice. otherwise i am going to say its a bad soleniod
04-22-03 | 09:37 PM
#27
Originally posted by twokrx7
Have you tried the OFF position? If you set to OFF and run it to redline without overboosting, then the boost control issue is likely in the settings on the SBC.
My SBC controls boost in AUTO mode below 15 psi, above 15 it doesn't control well in AUTO. Above 15 the MAN mode works better.
Have you tried the OFF position? If you set to OFF and run it to redline without overboosting, then the boost control issue is likely in the settings on the SBC.
My SBC controls boost in AUTO mode below 15 psi, above 15 it doesn't control well in AUTO. Above 15 the MAN mode works better.
