67mm GTX4294r from a-spec
#1
Thread Starter
Rotary Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 814
Likes: 7
From: Charlotte NC
67mm GTX4294r from a-spec
Just another update on my turbo quest. I am now the owner of a gtx4294 67mm drag turbo.
I don't know all the specs but Sean suggested I try it. Has the specs close to the Borg warner 67mm turbo but with ball bearings. So hopefully thats a plus. Sean was extremely helpful and very thorough. I ordered it one day last week a.got it today. Actually came yesterday but I wasn't home.
From my knowledge this turbo can flow 90+lbs/min of air so that should get me to my goal of 650-700hp. And I was hoping that with the small inducer wheel I might get quicker spool as well as it being ball bearing. Turbo should be on the car and running in the next week or so.
I don't know all the specs but Sean suggested I try it. Has the specs close to the Borg warner 67mm turbo but with ball bearings. So hopefully thats a plus. Sean was extremely helpful and very thorough. I ordered it one day last week a.got it today. Actually came yesterday but I wasn't home.
From my knowledge this turbo can flow 90+lbs/min of air so that should get me to my goal of 650-700hp. And I was hoping that with the small inducer wheel I might get quicker spool as well as it being ball bearing. Turbo should be on the car and running in the next week or so.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
DigitalSynthesis
2nd Generation Specific (1986-1992)
21
01-04-04 05:58 PM