What did you to or with your RX-7 Today?
#2129
#2132
New 88 Rx7 TII in the Central Florida area. I bought it as a non working Rx7 two weeks ago and just got it running two days ago!
Today, I just finished replacing the gear oil in the MT, doing an oil change, installed a new fuel filter, and installed a new air filter.
New on my list of things to do is to check the fuel pressure regulator, check the injectors, check the compression, and a visual inspection of the turbocharger.
Today, I just finished replacing the gear oil in the MT, doing an oil change, installed a new fuel filter, and installed a new air filter.
New on my list of things to do is to check the fuel pressure regulator, check the injectors, check the compression, and a visual inspection of the turbocharger.
#2134
I took my t2 motor out of my chassi, opened her up and found some bad news
-____- )=
Going to need
NEW
-side/front/rear irons. Not lappable )=
-eccentric shaft. Bearing failed, started kinda melting the inside of my stationary gear
-stationary gear.
Welp time for a full rebuild with street port (= money and time is put to work.
-____- )=
Going to need
NEW
-side/front/rear irons. Not lappable )=
-eccentric shaft. Bearing failed, started kinda melting the inside of my stationary gear
-stationary gear.
Welp time for a full rebuild with street port (= money and time is put to work.
#2135
Yesterday i order all new fan relays just because the rubber mounts were broken. Also picked up a new relay for my lights i was having a flickering issue on the lights and turnout to be that the relay was on his way out.
Thinking about ordering a spare shorthblock.
Thinking about ordering a spare shorthblock.
Last edited by BLACK MAMBA; 07-22-12 at 08:28 AM.
#2150
finally got the stoptechs on
had to trim some of the dust shield/cooling duct, but other than that...really straight forward easy installation
I also got to measure the cars for wheels finally too now that the brakes are on
looks like my setup will be 18x10 front, and a 18x11.5 rear
should be able to do a 3.5" steplip in the front and a 4.5" steplip in the rear
had to trim some of the dust shield/cooling duct, but other than that...really straight forward easy installation
I also got to measure the cars for wheels finally too now that the brakes are on
looks like my setup will be 18x10 front, and a 18x11.5 rear
should be able to do a 3.5" steplip in the front and a 4.5" steplip in the rear