tookwik

Josh, i think there may be a couple months long wait on those remans from mazda

Garrett

I just blew up my engine and plan on doing the rebuild myself and porting. I am going to get some porting templates from racing beat and use a die grinder. A friend of mine who has done quite a few rebuilds is going to guide me through the process. So, if you want I can let you use my templates.

Also, I'm pretty sure they have the reman situation back to normal. I may be wrong, call up Ray Crowe out of Malloy Mazda. My friend and I just put a reman in his car last month.

Garrett

I have the MB RX7 from Greensboro with the CF hood, I'll be gone from the meets until after December and hopefully with a street port if all goes well.

GTUser

Yeah, I'm still around, took a few days off and went to the Mountains. I'm back and just got caught up on this thread. If the date and time is good, 11/13 @ 4:00 PM then I think we proceed with all the ideas above. I'll get a PM off to Dave to check out what he is comfortable with hosting and what he needs from the rest of us to make this happen and then I'll get a new thread up with the details. But yes, I'll need your help and the feedback from everyone, especially a commitment to be there for the GRR. We'll make it our first monthly meeting for November.

AntiVenom7

Steve, I had given that some thought, I wanna hear what they have to say as far as $$$ goes.

Taylor, I guess I was probably thinking more of getting a built motor from a shop, like rotorsports(ported, worked over, etc) than straight a straight mazda reman(even though that is the term I used in my posts). I was under the same impression as you about the backlog. It seems as though they may not be, according to Garrett, so I am gonna give Malloy's a call and see what the deal is.

Garrett, if I decide to do it myself I will probably take you up on the templates. Thanks for offering and good luck on your engine build. Look forward to seeing you once it is all back together.

Bert, how dare you take a vacation?! I mean, really, the audacity of some people.

Just for the record my motor died at 91,682 miles.

GTUser

Yeah, I decided that it would be good to get away from the job for a few days, and it sure was. Now I'm good to go for at least 3 or 4 days. Sorry to hear the bad news about your engine. Just think of a blown engine as not the end but the beginning of a bright new future. According to what Rick has said at the meetings that mileage you reported is about what to expect from a FD engine. The earlier problem with the coolant and radiator may have contributed to the failure of the coolant seals tho. It looks like there is a lot of interest in the idea of a Grand Rotary Rally, are you gonna be available for it on 11/13? We'll start off with a $10 up front ticket purchase and then work on the details of the shirts and provide the shirts at what ever the cost difference is. We'll see how it goes.

AntiVenom7

I may not be there in a rotary, but I will definitely make it out.

I think the radiator problem may be a chicken or the egg type deal. I had a mysterious coolant leak that I hadnt been able to track down. For about a month before everything happened I would have to add just a bit of coolant to the engine every couple of weeks. They may have been on their way out already and the overheat just pushed them over the edge or their failure may have caused the overheat.

I agree that this is just another marker in the ownership of a rotary. I knew enough to expect this when I bought it, but you always hope for it to be later than sooner. I am working out some details with Rotorsports. I may get one of their built engines. They have a good solid reputation and are close enough to be considered local. I am thinking a good streetport and a set of rebuilt turbos should get me on the way to 350-400RWHP. The 7 might disappear for a while, but when it comes back it will be better than ever. I may just leave it in the garage 'til I get ALL the mods I want done and then bring out next spring.

arghx

iTrader: (3)

Josh,

At least your car went out with a wimper rather than a bang. You remember how Rick rebuilt his car himself (except for porting/seals/machine work)? Well his was burning a quart of oil a week, until one day Jeremy took the car to school and the whole thing just blew up while he was pulling out of the parking lot. The apex seal shot through the rotor housing and killed the secondary turbo. He got around 100k miles out of it. I know he's probably mentioned it to you before but you should definately talk to him again about the whole process--he spent 7 months, but it's a clean as hell rebuild.

AntiVenom7

Ray, yea I am glad it is only a coolant seal. The car was getting good compression when I bought it and still runs strong once you get it cranked. This gives me hope if I decide to do the rebuild myself. I don't know if I have 7 months worth of patience like Rick, that is the biggest reason I am considering just buying a built engine. I definitely plan on talking to Rick this weekend, and glean some info from him.

GTUser

Looking forward to this weekend's drive-in too. It would be nice to see Josh and Dave again as well as everyone else. Need to talk about the first GRR arrangements to make sure we're all together on what will happen, and when. Also need to make the major decision on food, time, date, location, cost, etc. Then get a posting out on this forum to let everyone know what to expect and nail down driving directions and what we'll be trying to do during the GRR.

All ideas will be welcomed as well as volunteers to help get it all organized and put together. We'll learn alot this first time and we'll make mistakes but it will only mean that the next one will be a better one. Come prepared to contribute and get involved.

Rotofire

i got one interested form j-ville and one interested from my barracks so there's three cars coming with me so far...well three including mine.

GTUser

We'll get all the decisions made this weekend and I'll post the thread on this SE RX7 forum Sunday. I'll also send a PM to the guys that you've been talking to from that area to see if we can't get them interested.

poor_red_neck

I'll try and make it out.

I'm driving on a "getting worse by the day" ECU. Its like Its just BARELY trying to keep the motor running. I can't press the throttle more than oh say 15 percent... so interstate driving equals a no no. The beltline wont be fun. Add that, in addition to the whopping 6 mpg I'm getting right now (after replacing TPS, O2 sensor, plugs, etc) but dammit, I'll try

I think going to the last meet, from hillsborough street to strickland, and back, I burned over 1/4 almost 1/3 of a tank of gas. Hopefully, if there are more rotaries there, it'll be worth it

Hope to see you guys there,
Jon

P.S. I left before the guy with the crown vic came in... I heard somebody say it was modded... what's it got done to it? Just curious.

Jayseven

iTrader: (1)

jmunilla if you want to go the cheap route. you can get a reman from ray crowe at malloy for 2000. he should have them in stock. when i ordered mine back in august, he got it to me in a couple days. Then you could just slap it in and be on the road in a couple weeks. That is the cheapest and quickest way to get a motor. all depending on how much you want to spend, and how soon you want to get your car running.

Jay

Johny zoom

iTrader: (5)

I won't be there this weekend I spending time with my daughter.

Bert Ill helpwith the cookout whatever you need, My vinyl guy will make any kind of logo or banner or whatever we need .My Tee shirt guy is good but SLOW shirts probably wouldn't be ready untill next year.

Steve: whats a good day next week to put my turbo on I have a bad hesitation going on pulls fine upabout to 3 to 4 rpm and at 0 boost after it goes past it pulls fine. I have a Rtech 1.7 chip should be here FRI.

tookwik

If its the vic that I'm thinking of, he's a member of hpj (horsepowerjunkies.com) and did his own 6 spd. swap into it. He also owns a Firebird WS6. This could be a completely different guy though.

GTUser

Jon, If you can't make it out in your 7 then hook up with Taylor or dubcaps on this forum and see if you can get a ride out with them. If that won't work let me know and I'll come over and give you a ride out to the drive-in. But if you want to drive out then forget the beltline and go the back way by Cameron Village to Glenwood Ave., then take Lead Mine Rd up to Strickland. Turn left on Strickland and the Char Grill will be on your left about half-a-mile up as you are going toward 6 Forks.

Someone will be glad to get you to the drive-in and home again. Let us know if we can help with the car or with the ride.

Bert

GTUser

Hey, Johny. Bring your daughter down to the meeting, if she is under 15 I know Josh would like to meet her. JUST KIDDIN'.

We'll work on the shirt designs and decide on the design or atleast a concept for the design and see what we'll need for the event. I really don't think we can get the shirts ready for the GRR but could have them at one of the following meetings in December or January to pass out. I'll let you after the drive-in what needs to be done and give you some options. Thanks for volunteering, I like the idea of a "GRAND ROTARY RALLY of NC" banner and maybe a few smaller signs to post at some critical intersections to insure no one gets lost on the way to the rally. We'll decide on the rally site Saturday and I'll let you know what we need early next week.

Dltreezan

iTrader: (3)

Aight guys i live in Wilson now after driving down here from Portland a fiew weeks back. I drove straight from Twin Falls, Idaho to Raleigh in one shot, forty hours straight and had my car break down on 64 right in Knightdale. I got the car ion working order now and would like to meet up whicha guys. Anyhow could someone post where this meet is and the details because i really dont feel like searching thru pages of thread to find the details. Thanx _derek

Rotofire

GTUser

Welcome to North Carolina, we're glad to see that it is possible to escape from the great northwest and survive to tell the story.

The Raleigh Rotary Drive-In will be taking place this coming weekend, Saturday, Oct 23, 6:30 PM at the Char Grill on Strickland Road, north Raleigh.
Here is the posting, scroll to the bottom of the page, with driving directions from just about any direction. You'll be coming up 64 from eastern NC to Raleigh.
https://www.rx7club.com/forum/showth...&page=12&pp=10

AntiVenom7

Taylor, I saw you driving up western yesterday around 5:30-5:45. Damn, I forgot how good a modded FD looks riding down the road.

JaySeven, how much was shipping on the motor if you remember? Does he require a core(I know the answer is prob. yes) and if so how much of a core charge is he charging? Thanks.

I am out of town this week, but look forward to coming to the meet this Saturday.

GTUser

We've heard that before and Josh no show! You sure you will be there? Oh, remember that The State Fair is going on, NC State plays Miami at 7:00 PM, and the Red-White basketball game is on at the RBC Center on Saturday night. Stay away from the west side of Raleigh on Saturday!

tookwik

Very true... good luck to anybody that may attempt it cuz you crazy! Just kidding actually... The only roads that i've seen that are bed from the fair are parts of Hillsborough in the afternoons and pretty much all of blueridge and the side roads this side of Wade Ave./I-40.

Dltreezan

iTrader: (3)

great I have to drive home from the flea market on saturday in Burlington back to wilson. Traffic is gonna suck.

FD3sAutobot

iTrader: (6)

I'm the lucky one going to the fair this saturday ....but I'm taking my son so it will be fun....don't know If I'll make it out to the meet though...If I do go I'll be coming late.

I'm also having a little shindig at my house here in durham on next saturday 10/29....just a little holloween party.... big camp fire...a bit of liquor...should be fun I'll keep you posted as the day gets closer.