AntiVenom7

hey chop meat. that is a pretty nice house. we should definitely rent it for the next TOTD.

Batguano

TOTD last weekend. CMP this weekend. When will it get any better?

Johny zoom

iTrader: (5)

Thanks for noticeing Do you still need your car tuned, What do you have in mind? Ive got my microtech now I want to get it installed and tuned. I know some other people need tuning. Can we possibly get a tuner for PFC and microtech? I may have to make a trip to sunny FLA. IO want to have this done way before VIR on the 28 of June. Let me know what you think.

I don't think Ill make the Down East tour I'm going on Vacation the following week and have to much to do.

Johny

PerkyStina

For y'all who aren't going to the Down East event, can we meet up at Char-grill?

I miss y'all, and I asked for that Saturday off, since I am assuming that's kinda the 2nd weekend in May... since this Sunday is the first.

Lemme know...

AntiVenom7

yea i still need a tune. i think rotorsports does microtech.

TO, do they do microtech tuning? how are the cars coming along?

arghx

iTrader: (3)

Yay, I just bought me a short shifter! Steve apparently prefers the sloppy factory shifter with a mile-long throw, so I we made a little exchange since I have new bushings in mine.

tookwik

I still need one too. Somebody make the phone call.............

JKM

Guys, I need some help from anyone who knows something about S5 transmissions. I posted this in the 2nd gen section but no one responded.

I'm using a 91 na transmission to go into my 84 GSL-SE. Mainly because it's a hell of a lot easier and cheaper to find FC trannies instead of FB ones. The tailshaft from the FB won't quite fit on the new transmission because the S5s have a harmonic balancer (I think that's what the FSM called it) on it. If you've ever taken the tail off it's the big metal thing that looks like a weight. I have to get this thing off before I can put the tranny back together, and have my GSLSE back on the road. But...I'm not sure how. I took off the snap rings and speedo gear that were in front of it off, and there's a giant nut that appeared to be holding it on that I removed. But..the thing still won't budge.

I checked the 91 FSM and there's one more piece in there that's called the "taper cotter" that may need to be removed to pull the balancer out. Only problem is the FSM shows that it's removable, but doesn't mention how. So, does anyone know? I need to get this car done, it's currently at my parents' house and I need to get it off their yard ASAP.

AntiVenom7

I am not talking with 100% knowledge, but I would assume like on many other transmissions that this balancer is also press fitted, and will require a gear puller or perhaps a press to remove. again, i am only talking about my experience with other trannies not an s5 tranny.

GTUser

Sorry, I was busy sending an email to the Wedding Mansion people. You'd think a guy with as many RX7s as you have would have more to worry about and spend his time on than how fast I can respond to him! Chill man, go sit in the princess, or Tiffany, or start working on your project AE car. :0) (0:

Here is what the site says it is available for groups with minimun 2 day stays, the rate is $750 - $1500 a night. I figure that is the range based on time of year. If we get 10 people willing to go next year that is $75 - $85 a night, for 2 nights it is $150 - $170 for the weekend plus food and drinks. I figure we'll probably come out with about the same expense as staying at Fontana if you count the cost of meals at their restaurant. If we can get a few more to commit and share the food and lodging expenses then we can do a little better.

I have sent them an email requesting more information about the mansion and what their rates would be for an early April weekend. I'm waiting to hear from them.

GTUser

Let me know which one you bought and how you like it. I have a lot of HOT air coming in around the center console and have figured out that I need to rebuild my shifter to block it out, besides the shifter has a lot of play in it. Since I can't go to the down east drive, we had a last minute schedule crisis and I am working 8-4 Saturday and Sunday, I am gonna use all that OT to spend on a shifter rebuild and SS brake lines.

I wouldn't mind just rebuilding the factory shifter but like the shorter throw of after market shifters if they are a good fit and work fine.

Ashraf, have you got any advice on rebuilding the factory shifter versus installing a new short shift kit?

tookwik

Just for the record, I picked up my car today from the transmission shop and it runs fine as far as I've been able to notice. With the 8.5# flywheel and 6 puck clutch it makes for a hell-of-a stop and go experience in traffic but hey... maybe thats not what I'll end up doing with it. (in the long run)

aBieker

JKM...

I don't know exactly what you're talking about as I have not pulled my tranny apart, but a "taper cotter" is usually a cone-shaped cotter pin that holds the damn thing by being pressed into place. I often just go at stuff like that with a nice 3lb hammer or something, but a gear-puller may be the more "sophisticated" answer. See if you can tell how and where it is stuck in. As was mentioned earlier... those things are usually press fitted so it'll really be jammed in there if it is what I'm thinking it is.

mattp

iTrader: (3)

Anyone else?

Johny zoom

iTrader: (5)

Maybe I want the same responce from you as I do my Turbo fast and to the point. Uh oh I think I may have created a song title for Greg " Why can't you be more like my turbo" anyway thanks for checking on this and keep me informed.

I installed my boost controller on today ( in the rain). Man, she is ready to rock I have 1100 miles on her and I can tell she's ready to go. Im still not boosting much or for very long but when I do lookout!

Turbo II

iTrader: (1)

maybe it's time for a rap song... bitch, why can't you, why can't you be, be more like my turbo, bitch... yo, like be down with that, don't spool on me if you can't be fast like me, bitch be to the point, fast, more like my turbo, 'cause my homies are spoolin and they ain't foolin... hrmm, nevermind.

anyways..........I'M BORED! I have to get up at 4am to take my son to the airport so he can go to japan again...then be at work at 9am....sucks to be me.

yayer ! my 100th post.... wasn't it josh not to long ago that was posting his 1000th?

capn

hes going again?!?!

that boy sure likes japan tell him to take alot more pictures and get some cool vending machine things again that used panty vending machine was a wierd one.

JKM

It's flush with the surface of the balancer. I'm not worried about sophisticated, beating it with a large hammer at this point might be fun.

AntiVenom7

glad to hear you got it back together, taylor.

AntiVenom7

i am working on 2000

arghx

iTrader: (3)

Bert,

I have Mazdatrix brake lines and a Mazdatrix short shifter. Here's the deal with the short shifter. The throw is MUCH shorter and shifts are more precise, but it still has the notchiness of an FC shifter. I'd look for it used, as Mazdatrix lists it at $192. Removing the nice warm breeze will require a new rubber boots in the shifter, which are sold separately for I believe $50ish. See the Mazdatrix write-up on installing the shifter http://www.mazdatrix.com/faq/ssinstal.htm . At the next drive in I'll let you sit in there and get a feel for it.

As far as the brake lines... they're a good investment. They're $100. I got them for Christmas. You'll have to bleed the system though--Jeremy could help you with that if you've never done it. He's the one that helped me bleed mine.

Let me tell you though, if what you want to do is reduce the brake pedal travel then the brake lines alone won't do the trick. What you need to do is adjust the brake booster pushrod. I can help you with that if you want me to come by some time. What you need to do is unbolt the brake master cylinder. There are two 12mm nuts and a 10mm nut on this gray thingie which needs to be moved out of the way before you can get to one of the bolts.

After you unbolt the master cylinder you should see the pushrod. It may be in there a bit so pull it out with some pliers or something. Then to lengthen it hold one end with a vice grip to keep it from turning and adjust the pushrod with a 7mm socket. Don't lengthen it too much or your brakes will drag. That's what happened when I got into my accident... the brakes were dragging, the car wouldn't move, and I absent mindedly forgot to set the parking brake. Most likely you will have to adjust it several times to get it where you want it.

capn

ray who did the paint on your car? im going to be in the market for a paint job soon

arghx

iTrader: (3)

The guy's name is Jeff Brown. He painted Bert's car too. I believe his cell phone number is 919-610-1987 . Jeff works at a body shop in Raleigh on Lake Wheeler road, but his side work is done in his neighbor's garage in Johnston County. Call him up, tell him that myself and Bert recommended him to you. He'll probably want you to bring the car by his work so he can look at it and give you an estimate. He may be working on another project right now so you should call him soon and discuss when both of you are available to have it done.

toddm

anyone know where to get a good rebuild locally? my motor just went during tuning.

tookwik

Rotorsports Racing is really the closest. I think thats near charlotte. Sorry to hear the bad news though.