85_rx7_12a

i had to drive it to get it home but its fixed already its safe trust me if it wasnt i would drive my gsl-se

ROTORX7Holly

Well keep it safe. The rotorheads help each other out.

85_rx7_12a

i know thanks for looking out but i wouldnt put myself or others in danger
or my rx-7

BigIslandSevens

iTrader: (4)

Hey everyone. Just a little update on the FB. I got the carb stripped and rebuilt by Sam the man and swapped him a S4 n/a tranny for a ported intake manifold, and the carb work. Also picked up a RB header from him. Needs TLC but it will be sweet!!. As well I grabbed Stu's old Mazdaspeed muffler Coming along.

Got it up and running the other day. Still have to adjust the accelerator pump to cure the stumble. Then get it registered and drive it for a while to shake it down good. Also performed the second gen coil mod. Now some in depth cleaning is needed.

I'll post some pics of now and later post cleaning in a day or so.

See ya soon. Oh, Any of you guys that got the track bug at ZF, There is a track day event weekend at CMP October 11-13 I believe. ( Carolina Motorsports Park) 325 a person for 3 sessions a day for 2 days with instructor.

Crit

iTrader: (6)

Holly, just a little clarification, before you run off thinking we're ALL careless. Michael's hub isn't studded, so that's his 12A car, which also needs a new axle. He said he was replacing the hub/rotor (they're both the same piece, right?) and that the car was off the road. He didn't tell us about his problem until he was already home.

So, Michael, what makes you think that you need a new axle housing and bracket, and what bracket do you think you need?

Jeezus

iTrader: (4)

Why are you guys up so late?! GET SOME SLEEP lol.

Also, nice work on the FB Dave!

rxtasy3

iTrader: (2)

ahh, so there's 3 now? there's a chance i'll make the meet this sat. any from nc coming thru? kinda wish it was alittle earlier than 3pm tho, would make for a longer stay for me.

85_rx7_12a

i can meet you there early and we can carry on about our cars and look at my poor 7 and you can give me tips

ray green

iTrader: (14)

Hey Michael! (Michael I, not Michael II). It would be great to see you. I know it a bit of a drive for you Carolina boys but remember getting there is half the fun. And this looks like it could be really big with all those boingers running around, a great opportunity to show why rotaries are superior.

And Michael II, don't take Holly's comments the wrong way, she's our official Safety Officer and Mom, so it's her job to scold us when ever we do anything wrong (which is pretty much all the time).

Also that's not a bad idea about meeting early, the boingers are planning a 3:00 pm start time but I don't see any reason we couldn't move it up a bit, say to 2:00. That way we can get all the good parking spaces.

Dave nice work on the FB, I can't wait to see Stu's fart can on there. If you can get it road worthy by this weekend a trip down to Fort Yargo would give it a great shake down.

So Mike (Mike, not Michael) are we meeting at the Winder Jeffery's, the cheese place, or what? And When?

t_g_farrell

iTrader: (1)

Ray, heres a mileage goal for you. 1.3M miles. They did say he's rebuilt the engine, trans etc. So your goal should include no rebuilds.

http://www.cnn.com/video/#/video/liv....mile.car.ksnt

Re-Speed.com

iTrader: (3)

Oh...The thread seemed to be heading in a "bust Crit's *****" direction....my bad


-billy

ray green

iTrader: (14)

Yep I saw that Tim, watched the video too. He says "it's never broken down" but he's had the engine and transmission rebuilt several times (big V8, automatic, read more bucks for one rebuild than I have in all four of my GSLs). And driving a behemoth like that has got to be any but fun, kind of like you are registering for the retirement community the day you drove it off the dealer's lot.

Now a 12A with 1,000,000 miles on it would be more interesting. Mike is well on the way, with 250,000+ and that's WITHOUT a rebuild.

85_rx7_12a

im at 230,xxx no rebuild and it runs soo good

Crit

iTrader: (6)

I'm thinking that a Jeffrey's meet-up for the sake of caravanning in wouldn't be a bad idea. At least that way we could park together, and leave a little extra room for Billy and other folks who might come in late. We can't leave the widebody stranded, it's just to nose-bleedingly bright to forget.

ray green

iTrader: (14)

Which Jeffrey's is that going to be Crit? It looks like we have one in Winder, one in Braselton and one in Suwanee.

http://maps.google.com/maps?sourceid...num=1&ct=image

msimonov

iTrader: (5)

Ray, are you sure there is one in Winder? I checked and seems like Braselton is the closest. The one in Braselton could work and give us a nice drive down to Ft. Yargo. If this works for everyone, what time do you want to meet?

ray green

iTrader: (14)

Google says there is but the address is:

Barrow Regional Medical Center: Mikell Jeffrey Eug MD‎Address:
Unverified listing -
Removal requested ()
Write a review - - more info »
Placement on map is approximate
316 N Broad St
Winder, GA 30680

Get Directions
(770) 867-3400
* approximate times
- barrowregional.com

Sounds suspicious.

Let's do Braselton. Kim Bassinger might be there.

So what's a good time? If we figure on getting there around 2-2:30 we can get all the good parking spots, so how 'bout 1:30 at Kim's?

GB7

iTrader: (1)

Ray no jefferys in winder. does anyone local have an oil cooler for an SE
that doesn't leak they would part with. need one to get the SE on the road
so both cars can show up saturday. thanks Gene

ray green

iTrader: (14)

I've got a beehive Gene, if that will do. But I hear those SE's are pretty fussy. Traveling to Atlanta tomorrow and Friday, can bring either day.

Both cars will definitely help the 12A count.

Ray

PS, does Kim Bassinger still live in Braselton?

Crit

iTrader: (6)

Them's fightin words. There's nothing fussy about an SE. FYI, Greg, you can likely mount an S1 or S2 oil cooler up there with a little rigging or use one for an FC, but I don't know of anyone local with an SE oil cooler.

I really think that 1:30 is a little too early, as there won't be many people there 'tiil about 4:00. The importatlanta guys are never on time.

GB7

iTrader: (1)

thanks for the offer Ray but I need the cooler under the radiator . I have an fc cooler
just don't have time to make new oil lines by saturday [damn its hard to keep two of these cars on the road at the same time]

BrettLinton7

iTrader: (33)

Does that mean the one I had wont work and/or the lines are bad?

GB7

iTrader: (1)

Brett , good cooler bad lines [SE and Fc lines and coolers are different but
either can be made to work] i just need to make some custom lines

rxtasy3

iTrader: (2)

ray, which jeffery's in braselton, 6332 or 5717? from what i can tell they're right there together. when u all decide on a time, i could catch ya there.

311unity13B

Well, it looks as though i will be coming now. I may bring my buddy Mr. Rogers with me if he wants to come. We were supposed to go kayaking with like 12 friends in Athens ( http://www.broadriveroutpost.com/ ) but the river is closed because of low water level. So, I am gonna come now.

yeah, i agree, 1:30 is too early. ray, since you seem to be the team leader, make a time to meet at Jefferys and post the location with the address. And I shall show up there. Ray, I also have a gift for you i think you may enjoy. Its quite humorous.