Old guys with 12As club meeting
#3476
Brett, I *am* correct. The injector nipple is still very much usable...it's the line that snapped. And as you very well know, those lines are to be replaced prior to installing that motor into any car regardless of their condition as a safety precaution. Try actually listening to what I say for a change, geesh.
And Crit- I got your message and PM. I'll try to get those off of that motor tomorrow morning/afternoon. And I just remembered- I've got an S5 electric OMP with the lines sitting on my stereo like 8 feet from me- would those work instead? I mean I can get the S4 ones but probably only the 2 that hook onto the LIM. The ones that go to the injectors on the block- one's snapped off like I mentioned, and I tried getting the other off and I can't get a thin enough wrench to unscrew the injector, if that would even work at all. Call me tomorrow after 10, or I'll give you a call towards the afternoon, and I'll meet you somewhere. I'm hopefully picking up that exhaust tomorrow evening and I've got to go 400 to exit 7, so we could meet then if you weren't working or anything.
That's too much typing Night ya'll.
#3477
OGTA
iTrader: (5)
Ray, thanks for pulling for the lions. Not a good day. I think I taught my wife and daughter a few new words watching that game.
Anyone interesed in a 12A air cleaner upgrade? I have 2. I have the RB white cannister for Nikki. It looks like the RB Holley air cleaner cannister. This will require some plumbing work, if you still have the air pump and rats nest. I also have a blue lid for the stock cannister that is open all the way around. It comes with a stand off that extends the center stud of the Nikki carb to attach the lid. I think this was made my Rotary Performance. Both are free to a good home.
Anyone interesed in a 12A air cleaner upgrade? I have 2. I have the RB white cannister for Nikki. It looks like the RB Holley air cleaner cannister. This will require some plumbing work, if you still have the air pump and rats nest. I also have a blue lid for the stock cannister that is open all the way around. It comes with a stand off that extends the center stud of the Nikki carb to attach the lid. I think this was made my Rotary Performance. Both are free to a good home.
#3479
Sleeper but still slow
iTrader: (1)
Join Date: Jan 2006
Location: Georgia
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
Happy almost B'Day Chris! Do you need the door or just the rubber molding for the door? (I think I have both). Remind me which cooling hoses you need. Yayo is Kevin. Not sure what Yayo means.
Happy New Year Dudes! Go Georgia! (we whipped MSU today). It's a bit uphill right now but I'm still pushing for the Nittany Lions, we are in the 4th and USC just scored another TD, but there's still 12 minutes left.
Happy New Year Dudes! Go Georgia! (we whipped MSU today). It's a bit uphill right now but I'm still pushing for the Nittany Lions, we are in the 4th and USC just scored another TD, but there's still 12 minutes left.
#3481
Sleeper but still slow
iTrader: (1)
Join Date: Jan 2006
Location: Georgia
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
No one has a window assembly by any chance? Power window motor driver's side, or the whole metal frame thingy and glass with the manual handle? I NEEED a way to close that window.
just ANY full system that gets a window up and down in a first gen, SA manual, FB manual, FB power anything I need it
just ANY full system that gets a window up and down in a first gen, SA manual, FB manual, FB power anything I need it
#3482
No one has a window assembly by any chance? Power window motor driver's side, or the whole metal frame thingy and glass with the manual handle? I NEEED a way to close that window.
just ANY full system that gets a window up and down in a first gen, SA manual, FB manual, FB power anything I need it
just ANY full system that gets a window up and down in a first gen, SA manual, FB manual, FB power anything I need it
So I got some progress done on the 7 today. The door is fixed, so my passengers don't have to pretend it's the General Lee when they get in through the window. I fixed the lock and replaced a spring so it's working perfect now. I still can't get the passenger window switch to work, so I've got some paper clips in the connector so I can move it with the drivers switch... I've got the subs out now and I'm waiting for 6:30 to get here so I can go ahead and head to get that exhaust...
#3483
No distributor? No thanks
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
I just came from the Buford Pullapart, Chris, and they've got 2 FBs with complete doors. Get on down there.
I didn't know you needed other stuff, but I also got the coolant line you need, so I could still keep my spare.
I didn't know you needed other stuff, but I also got the coolant line you need, so I could still keep my spare.
#3485
Crit- I got some line that'll work for the OMP from Zach. It's yours, but you can still have the others if you want. See you tomorrow.
And Ahh I got the exhaust... cleaned it up a bit and took some pictures.
Yes, all that's layed out in my bedroom Hopefully I can get it on Sunday, too.
Another question- would there be any benefit to put a stock gutted cat in place of the cat-delete pipe? I'm talking sound wise. And it'd be temporary.
And Ahh I got the exhaust... cleaned it up a bit and took some pictures.
Yes, all that's layed out in my bedroom Hopefully I can get it on Sunday, too.
Another question- would there be any benefit to put a stock gutted cat in place of the cat-delete pipe? I'm talking sound wise. And it'd be temporary.
#3486
Brett could you reshoot that last shot, just lower your hand a bit?
Nice exhaust!! If you already own the gutted cat that would be best.
Chris I'll bring along any stuff I can find that might help with your heating and cooling problems, including making another search for that driver's side window regulator that should be out there someplace. I can't believe you are still managing to get around without a heater or driver's side window.
Also if you could bring your camera along for some night shots, mine doesn't do very well after the sun's gone down.
Nice exhaust!! If you already own the gutted cat that would be best.
Chris I'll bring along any stuff I can find that might help with your heating and cooling problems, including making another search for that driver's side window regulator that should be out there someplace. I can't believe you are still managing to get around without a heater or driver's side window.
Also if you could bring your camera along for some night shots, mine doesn't do very well after the sun's gone down.
#3489
Oh you old perverts
I'd totally sell you the box if you had a different enclosure i could use that would fit 2 10's (together or seperate, doesn't matter) and allow me to have a rear strut bar.
That was before the black interior... and it fits perfectly between the strut towers
I'd totally sell you the box if you had a different enclosure i could use that would fit 2 10's (together or seperate, doesn't matter) and allow me to have a rear strut bar.
That was before the black interior... and it fits perfectly between the strut towers
#3491
All I have is a truck box for 2 10's thas why I need a new box....I have a bandpass box for 1 10, but my speaker is just too gangsta for it. BTW you need to flip the box around so the sound bounces off the back glass... It will at least DOUBLE the output
heres my truck box
heres my truck box
#3492
And her name's Anya. She'll be going away soon whenever I buy another Maxim calendar for this year... Don't let Cathy see!
#3494
OGTA
iTrader: (5)
Kevin, I'll bring the air cleaners. You can take your pick.
Donnie, I'll take the FC oil cooler and lines. We'll have to work out something with Billy on the storage charges. Billy, look at it this way, when I install the oil cooler I'll need a filter pedestal. Sounds like some business for ReSpeed.
Donnie, I'll take the FC oil cooler and lines. We'll have to work out something with Billy on the storage charges. Billy, look at it this way, when I install the oil cooler I'll need a filter pedestal. Sounds like some business for ReSpeed.
#3495
Would that be "old people" or "old perverts" Crit? I've always counted girls as guys too, so we don't need the politically correct "people". And not ALL of us are perverts. I think. (Not sure about Holly).
Chris I got the lines and the side moldings, but still can't find that power window crank motor. Sorry. Also I have a complete set of stock hydraulic brake lines in good shape, purchased new a few years ago for my Tan One and with modest mileage, if anybody wants them (I've since become addicted to braided stainless).
How 'bout this weather?? I've been outside all day.
Chris I got the lines and the side moldings, but still can't find that power window crank motor. Sorry. Also I have a complete set of stock hydraulic brake lines in good shape, purchased new a few years ago for my Tan One and with modest mileage, if anybody wants them (I've since become addicted to braided stainless).
How 'bout this weather?? I've been outside all day.
#3496
Seriously? It's been raining on and off like crazy over here. Hopefully I'll be able to get started on the exhaust tomorrow. Anyone wanna help? I could totally borrow a family friend's car lift to do it, but my old exhaust is one huge 'Y' since the PO decided to weld the whole thing together, and I've got to do it at home so it can stay in one piece. And I want to be able to put it back on if I've got to.
And GL with the lines Crit....
And GL with the lines Crit....
#3497
Seriously? It's been raining on and off like crazy over here. Hopefully I'll be able to get started on the exhaust tomorrow. Anyone wanna help? I could totally borrow a family friend's car lift to do it, but my old exhaust is one huge 'Y' since the PO decided to weld the whole thing together, and I've got to do it at home so it can stay in one piece. And I want to be able to put it back on if I've got to.
And GL with the lines Crit....
And GL with the lines Crit....
#3498
Yeah my gravel and un-level driveway doesn't sound too pleasing to me... but I'm gonna give it a shot. And like I said the old exhaust is one huge piece. If I can't get it though, I'm going to either use the friends lift to get it all on and chop the old up so it'll fit in a truck or something. Thanks for the help though... If it were something smaller I'd totally take you up on that. Ever tried changing a whole diff. in a gravel driveway? lol
#3500
Rotary Freak
Holly