ncb13

something like that. his turbo didn't spool up till 6000rpm or something cause he started to fly up to me at the end. got him by a fender

dj_silencer200399

iTrader: (2)

So ant what are u doin to your ecu and your injectors?

And sorry to bust your bubble new guy but Sam's FB is tough to beat. He'll walk your car.

I love my FC T2 CONVERSION, IDC how fast other peoples rides are. i didnt get a 7 to smoke other 7's.

Had a good thread til this guy showed up

NICE INTERCOOLER SAM!

rx7 SE

iTrader: (5)

Just installed the rtek 2.1 ECU, got some balanced and flow tested 720cc and 1000cc injectors from kgparts.com. Keith is a good guy to do business with.

As soon as I get this tuning situation under control I'm uppin the boost! But until then we'll see wut she can do at stock wastegate spring pressure this Wednesday....on 101 octane and meth, just for safety ...plus I get to beat up on the beefed up rear end too!!

How'd the meet go fellas?

dj_silencer200399

iTrader: (2)

my bad islander didn't know who u were til a few minutes ago, nevermind that post.

catch-22

iTrader: (2)

HEY CAN I **** TALK TOO hahahaha Zmax this wednesday me and neal will be there with our cars and we can sort out all this out the right way, cause goin back and forth on the intranetz will go on forever.

slidin RX

iTrader: (2)

Sam thanks again 4 all the work sun sense nobudy showed up to tha meet......but she sounds like a beast now n the new oil def makes it happy roffl sry i hada rush off like that i din realize the time ...haha

bad 83

iTrader: (3)

No problem Manny. I just hope the mods we did will get a little hp back. Make driving that vert a little more enjoyable

aspirao

Hey Bad 83 I came out to meet you guys, but went to the wrong BK(took a right of I77) I then found the correct one I think,I'm not local so I dod not know my way around too well, but it was too late about 2 pm I had a good drive along with my 5 yr old nephew and since I had not driven the car in 9 month. Not sure If I'll be here for the next meet but if I am I will be there.

bad 83

iTrader: (3)

Sorry we missed you. Manny and myself were the only ones who showed. We must have just missed you because we left the BK at 2pm. We came to my house and worked on his car for a while. If you are somewhat local, we can meet up sometime.

I have finally got my car perfectly tuned at 15psi right now. Pulls like a stuck pig.

I have one question for you Anthony. How can you run more than one bar (14.7 psi) of boost? I thought all the R-TEK ecus still use the factory map sensor?

wfo91rx7

iTrader: (1)

well the rx7 is back under the knife for a while. maybe a couple weeks while i get this whole turbo thing sorted out and installed lol. ran great for the 200 miles the engine now has on it. Long, sam said you may be selling the haltech? let me know as I am gonna be needing a standalone soon.

bad 83

iTrader: (3)

Well Mills, glad your back in town. Hopefully we can scrounge enough parts together to turbo your FC. We need another turbo rotary around here

rx7 SE

iTrader: (5)

I'll be capping it at 15psi, which is pretty much the end of the efficiency of my turbo anyways. You can datalog all of your sensors with the rtek 2.1, ie, tps, coolant temp, afm, map, 02, wideband, air intake temp, etc. So even if I ever decide to try and creep the boost higher there is still a level of control, but not as reliable as a full blown standalone, but for the price compared to a standalone that is to be expected .....now if these damn injectors would come in now


How are you tuning yours with the rtek 1.7?

blackdeath647

iTrader: (2)

i'm just waiting on bushings for my car, it's not in driveable condition right now

wfo91rx7

iTrader: (1)

well the 7 has the turbo installed and its running. waiting on intercooler and bov and to find a standalone. running it with the wastegate flap open till then. its already got more power the way it is . Thank you for all the help Sam. Hopefully soon we will get this thing hittin full boost *thumbs up*

workinprogress80

Hey whats up guys, sorry I havent been on in a while but I havent had to bother any of yall with questions about my car since its not in FL with me I do have to say though that there are alot of 7's down here in Orlando, I see a nice DD gsl-se everyday on my way home from school and it kills me that i dont have my SA.

BTW Sam I think I may have something down here that will give the FB a run for its money granted you could build like six fb's for the price lol.




it does sound SWEEET though

hell this one might give ya a run too...twin turbo v12

rx7 SE

iTrader: (5)

^^^ Those BMW's are straight up nasty! I envy the power they make on minimal amount of boost, lol..


So I got finally got everything installed today, turns out my 720's are flowing 740cc's after the balancing . But did some driving around and datalogging with the rtek...hit as low as 8.87 AFR's at 12 psi lol. Safe to say she needs a lot of tuning cuz it feels like I lost a good 50 hp or so .

workinprogress80

the M cars are naturally aspirated but the M5's v10 sounds sick!

bad 83

iTrader: (3)

I have the same issue with the RTEK 1.7 as you do Anthony. It still runs off the factory map sensor. That will limit the computer to 14.7 psi. That is why I have capped mine at 15 psi. I have run the boost higher for short period of time and the AFRs still have stayed in the high 12s and low 13s. The air fuel doesn't bother me. I worry about how the computer isn't capable of backing the timing more above 15psi. But I will say this, at 15psi the RX is very hard to handle. Just ask Mills

bad 83

iTrader: (3)

Kory, those beemers are sweet. I would love to test drive one of the new turbo series1.

workinprogress80

You would like the 335i its got the turbo N55 engine with the M package, 6 speed manual...its teh secks. pics in a few.

bad 83

iTrader: (3)

workinprogress80

Try not to get any stains on it Sam...

workinprogress80

or you can go high-tech redneck and get the diesel

bad 83

iTrader: (3)

I think I have found the best of both worlds

http://www.youtube.com/watch?v=LsaAp...eature=related

LongsTurboFB

iTrader: (4)

Well as some know I'am buying a New Engine Management. So my old Haltech will be up for grabs But Sam has first dibbs on it LOL
But I will be staying with Haltech. Im going
platinum Baby haha NO I mean The New Haltech that is made just for Rotary!!
It is the Platinum Sprint RE. And man is it cool! So here is a pic of what it comes with.