I77 & I40 Crossroads rotary meet
01-09-10, 04:17 PM
#8201
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
After some thought I don't think the supercharged turbo rx7 will work out unless I use a roots type supercharger.....so in wondering if I should pull my stock s5 turbo and put a header on ....I don't want to BC its a low mile jdm turbo but.......
01-09-10, 04:28 PM
#8202
The turbo on Sam's car I made up. I took a stock s4 hot side and hound out the inside of
It intill the xs turbo fitted in snuge, then I made two 1'' in spacers for the manie. And Boom
I had a one of a kind hybrid turbo. All for around $225, but that was me doing all the work.
And yes that turbo can make more then 350HP, I made 406rwhp on a streetport and 15psi.
But the motor poped on 23psi.
It intill the xs turbo fitted in snuge, then I made two 1'' in spacers for the manie. And Boom
I had a one of a kind hybrid turbo. All for around $225, but that was me doing all the work.
And yes that turbo can make more then 350HP, I made 406rwhp on a streetport and 15psi.
But the motor poped on 23psi.
01-09-10, 05:02 PM
#8205
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
I should be running around that range of horsepower with my stock s5 car....I would guess around 230 to the wheels or more...but....I built the car to go 100,000 miles....if I install larger injectors and turn the boost up,....fmic....maybe 250, if I can ever get this other pile out of the garage....can't you do 15 w/ a stage 2? Again....price is a killer.....and I agree that the s4 ported will get more HP....also I may have added a few inches to my ***** above since I have never got the pos dynoed.....
Well the Bridgy is ready for the meet. Sam I should be at 
01-09-10, 05:23 PM
#8207
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Holly ****! No wonder..with those injectors 15 should be maxing out the injectors....and pinned at around the same psi...but I have never built a rotary...have no job....and know nothing about tuning....but I did stay at a holiday in express last night....and I have never lost *a rotary engine*....and only 1 rear end....didn't u have a vette?
Haha..on a side note that annoying *** mustand that keeps reving its engine every time it passes my house is broken down down the streetwise...also my cars never get drove BC I can't complete anything BC I jump around from project to project
And dude man from spartanburg....u ever had Tanners' oj? And quite saying u have nowhere to practice driving...hwy 11 and the blue ridge parkway is how far away? I'm originally from Clemson so....
Haha..on a side note that annoying *** mustand that keeps reving its engine every time it passes my house is broken down down the streetwise...also my cars never get drove BC I can't complete anything BC I jump around from project to project
And dude man from spartanburg....u ever had Tanners' oj? And quite saying u have nowhere to practice driving...hwy 11 and the blue ridge parkway is how far away? I'm originally from Clemson so....
01-09-10, 05:39 PM
#8208
You can make 200 rwhp on a NA bridgeport. 250 on a TII isn't that big of a deal. I'm strapping around the 300 rwhp range right now. I would love to make the 400 range, but I don't think the first gen can handle that much power without subframe bracing and some major rear end upgrading.
01-09-10, 05:52 PM
#8209
Sounds like our rx7club is starting to have some serious powerhouses 
We'll definitely need to start hitting tracks soon, all the boosted 7's are getting close to 300 rwhp or more... makes for some nice wheelspin on those backroads and more potential crashes...
We'll definitely need to start hitting tracks soon, all the boosted 7's are getting close to 300 rwhp or more... makes for some nice wheelspin on those backroads and more potential crashes...
01-09-10, 06:49 PM
#8210
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
skip barber....anyone....anyone? I thought about it....I stretched my ***** too big...I'm going to go with 220 when I hook up the AC with power steering....maybe 240 with a few more mods...with an engine that has not been opened....I wish I could at least street port this hunk of crap that has been taking up my garage forever since its a fresh build....maybe in the future when I get time.....and help...the people in rock hill suck huge *********....seems like ya do and do for them but when u need a handjob they're girlfriend won't let them out of the house.....on another note....wtf would you need that much power in an fb? Jeez..reminds me of when I was a kid and I had my s10...buick grand national engine with a t5 out of an Iroc z.....and when I say a Buick grand national engine, I mean a Buick grand national engine from Harry gants race car from the bush series...truck was lowered with an Eaton posi w 411s...anyway, to the point, I raced a new t/a in like 2000....long story a little longer I was in 3rd staring at the driver because I was still sideways from the stop light....not impressive unless you consider its an ls1 car...and he was going straight...and we were doing like 65
01-09-10, 08:50 PM
#8214
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2007
Location: sc
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Tanners may not even be there anymore but it was a burger place near the metrolina expo....they had kick *** oj......I went to easley over Xmas...damn...those glass building on 85 are a change...I think one is the Clemson icar bldg?
01-09-10, 11:05 PM
#8216
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
well im not sure if im gonna be able to bring the car down tomorrow because it seems to be hard as hell to find a hauler around here....but im still coming! i would drive dad's car but ive got some kind of noise comin from the rear end and i dont trust it that far sooo....dodge it is!
cant even drive my bro's rx8 cause the coil packs gotta be replaced!
cant even drive my bro's rx8 cause the coil packs gotta be replaced!
01-10-10, 07:44 AM
#8218
Dang it Anthony. I was hoping to have some competition for the FB today. O'well. At least you can go for a ride 
Maybe then you can explain to the rest of the second gen guys why it's necessary to have 300 rwhp in a first gen Anywho, I hope we have a good turnout today. Hope to see everyone there at the new meeting place.
Maybe then you can explain to the rest of the second gen guys why it's necessary to have 300 rwhp in a first gen Anywho, I hope we have a good turnout today. Hope to see everyone there at the new meeting place.
01-10-10, 08:00 AM
#8219
morning guys. can those of u running any of the dfis systems lend a hand?
https://www.rx7club.com/1st-generation-specific-1979-1985-18/relay-help-please-881608/
https://www.rx7club.com/1st-generation-specific-1979-1985-18/relay-help-please-881608/
01-10-10, 10:07 AM
#8222
Dang it Anthony. I was hoping to have some competition for the FB today. O'well. At least you can go for a ride Maybe then you can explain to the rest of the second gen guys why it's necessary to have 300 rwhp in a first gen Anywho, I hope we have a good turnout today. Hope to see everyone there at the new meeting place.
Maybe then you can explain to the rest of the second gen guys why it's necessary to have 300 rwhp in a first gen Anywho, I hope we have a good turnout today. Hope to see everyone there at the new meeting place.
01-10-10, 05:55 PM
#8223
Senior Member
iTrader: (1)
Join Date: Mar 2008
Location: Brandon, Fl
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
good meet today guys. was good seeing everyone. hopefully ill have mine back up in a week or so. Sam, ill have the shift light for ya friday evening when i get back from the mountains.
01-11-10, 10:49 AM
#8225
19 on 15lb.
iTrader: (2)
Join Date: Apr 2008
Location: Charlotte, NC
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Well i enjoyed it fellas, i enjoyed it all the way home.
Sam you can call me wrong all day but i know whats under the hood of my car, not every method has to be from your experience, they're are other ways. And just for your info my secondaries are 720cc. Pulled em off last night just to show you, although i didnt expect one of the rubber washers to be bad but, for once i would like to have a nice cruise without having my car questioned and yes sam we all know you have the fastest 7 out there thats ok ant's will catch u.
Sam you can call me wrong all day but i know whats under the hood of my car, not every method has to be from your experience, they're are other ways. And just for your info my secondaries are 720cc. Pulled em off last night just to show you, although i didnt expect one of the rubber washers to be bad but, for once i would like to have a nice cruise without having my car questioned and yes sam we all know you have the fastest 7 out there thats ok ant's will catch u.