I77 & I40 Crossroads rotary meet
06-04-09, 06:05 PM
#6426
Hey Robby. I told you all you need to do is get that SA running, then it would be worth alot more. Give me a holla, if you want to do that. I'm getting really worried about my vibration in the FB. I don't know how much longer the trans will hold up. If I bring the FB to the dyno day the way she is, I will not be doing any pulls. On a different note, I finished my first week of school. It feels like I have been thru three months. Hopefully the next 7 weeks will be better.
06-04-09, 06:18 PM
#6428
oh yeah guys those who dont know yet my new number is 7042358345. well the vert is safe back in my possesion, i decided no on the trade, didnt have the money to repair that car, but i WILL get one , soon. anyways, i got my cruise, and signal wiring out of another car, so im getting ready for my tilt column swap, to get rid of those ******* digital vert ones. but im realizing that the actuall problem is the ecu for the dash, im still slightly torn.....
06-04-09, 06:36 PM
#6430
Hey Robby. I told you all you need to do is get that SA running, then it would be worth alot more. Give me a holla, if you want to do that. I'm getting really worried about my vibration in the FB. I don't know how much longer the trans will hold up. If I bring the FB to the dyno day the way she is, I will not be doing any pulls. On a different note, I finished my first week of school. It feels like I have been thru three months. Hopefully the next 7 weeks will be better.
06-05-09, 04:23 PM
#6438
Got Rotors?
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Statesville, NC
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Sam i would like to get it going, and will if i get time. Right now i have a huge house project under way, and dont have the money to put in to the SA. I really would like to get the money from the car to get a few things tied up. If i do get to the car i will let you know and we will go from there.
Fixing to start her up woo hoo
wow..... thats ummm....... wow......
06-06-09, 09:41 AM
#6443
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
^^ Funny and offensive all at the same time. Only in America
Glad to hear it Long, I don't want to be the only one with a running bridge..You installed the jiggle pin correctly on your thermostat rite!!
I had to trace down some bad grounds and also a issue with the CAS trigger wire. Going for a drive now. Pushing 70 psi oil pressure at idle, new sending units kick ***!! Started with the turn of a key, no tow needed!! Sorry had to say it The sound is sweet and crisp. The neighbors all went inside when I fired it up
Glad to hear it Long, I don't want to be the only one with a running bridge..
You installed the jiggle pin correctly on your thermostat rite!!I had to trace down some bad grounds and also a issue with the CAS trigger wire. Going for a drive now. Pushing 70 psi oil pressure at idle, new sending units kick ***!! Started with the turn of a key, no tow needed!! Sorry had to say it
The sound is sweet and crisp. The neighbors all went inside when I fired it up
06-06-09, 05:03 PM
#6444
Well thats cool Dave 
!! Mine started right up too Had some problems last night with the oil psi It had blown the front cover main oil seal, but got all of that fixed today. It has ran for about 2 hours now and has 65 psi at idle and when in the gas around 75-80 so tomorrow when I get some more money to put gas in it, I will take her for a spin. :p And hey the thermostat that I got did not have a pin, so I drilled two holes in it, one on each side.
!! Mine started right up too Had some problems last night with the oil psi It had blown the front cover main oil seal, but got all of that fixed today. It has ran for about 2 hours now and has 65 psi at idle and when in the gas around 75-80 so tomorrow when I get some more money to put gas in it, I will take her for a spin. :p And hey the thermostat that I got did not have a pin, so I drilled two holes in it, one on each side.
Last edited by LongsTurboFB; 06-06-09 at 05:07 PM.
06-06-09, 06:36 PM
#6445
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Is everyone signed up for ZOOM_FEST? July 18-19th!! Get with it ya'll. Auto cross for the ZF participants only. As well there is PDX and touring laps!of Road Atlanta!! 30 bucks, cough it up people!! We are planning on bringing all 3 gens.
06-07-09, 03:29 PM
#6447
ok guys who have there cars running we need to goto Shadyside on the 20th
11.00 ($50 to win) 10.00 ($100 to win) 9.00 ($100 to win 25 runner up) 8.00 ($100 to win $50 runner up) and top eliminator ($400 to win and $100 runner up)
i think im going to post about it like 3 times a day till i at least get ppl to lie to me and say they are going to go lol
read the sig
11.00 ($50 to win) 10.00 ($100 to win) 9.00 ($100 to win 25 runner up) 8.00 ($100 to win $50 runner up) and top eliminator ($400 to win and $100 runner up)
i think im going to post about it like 3 times a day till i at least get ppl to lie to me and say they are going to go lol
read the sig