I77 & I40 Crossroads rotary meet
05-13-09, 08:01 PM
#6179
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
anyone got any 14 inch tires they wanna donate???....or possibly a set of wheels with good tires on them they wanna trade?
P.S.- it ran on starting fluid!
05-13-09, 09:33 PM
#6182
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Same power range here. What does that weigh in at.? I am 2660 full tank with me. Guess only time will tell...
Cory I'll give you 400 for it as is.
Cory I'll give you 400 for it as is.
05-13-09, 09:37 PM
#6183
Zuuuummmmm Zuuuummmmm
Join Date: Oct 2006
Location: King, NC
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ant!
Sam, once again I would love to keep it!....but with the fact that im now in the hole idk....flipping it was kind of the terms to get dad to agree to buy it.
I wanna get it running then go from there
Edit: Dave...paint my whole truck and 400 and we will call it even! =P
Sam, once again I would love to keep it!....but with the fact that im now in the hole idk....flipping it was kind of the terms to get dad to agree to buy it.
I wanna get it running then go from there
Edit: Dave...paint my whole truck and 400 and we will call it even! =P
05-13-09, 10:10 PM
#6184
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ant!
Sam, once again I would love to keep it!....but with the fact that im now in the hole idk....flipping it was kind of the terms to get dad to agree to buy it.
I wanna get it running then go from there
Edit: Dave...paint my whole truck and 400 and we will call it even! =P
Sam, once again I would love to keep it!....but with the fact that im now in the hole idk....flipping it was kind of the terms to get dad to agree to buy it.
I wanna get it running then go from there
Edit: Dave...paint my whole truck and 400 and we will call it even! =P
the 1500 I do cars for is at a minimum HALF what any shop would charge for a full paint job minus the door jambs and engine bay.( I do the jambs if desired) Just for everyones info that think the quotes I give them are stupid high. Not you Cory
I am just sayin..450 final offer
05-14-09, 01:17 AM
#6186
Would this be the car in question? http://charlotte.craigslist.org/pts/1159424130.html
05-15-09, 01:39 PM
#6191
Talked to Long today and he has most of the little nick nack stuff ordered to finish the turbo install. Should be boosting by next week If I can get my apex seals and solid corners, the 4 port 13B bridge will be put together. I have new side seals and springs, new 3rd gen corner springs, new rotor and stationary bearings just waiting. I still haven't decided to use my 8.5 rotors, or the 9.4s. With the old streetport and 9.4s, running 14 psi, that thing was nasty fast. I'm not looking for a dyno queen, just a nasty pavement pouder.
If I can get my apex seals and solid corners, the 4 port 13B bridge will be put together. I have new side seals and springs, new 3rd gen corner springs, new rotor and stationary bearings just waiting. I still haven't decided to use my 8.5 rotors, or the 9.4s. With the old streetport and 9.4s, running 14 psi, that thing was nasty fast. I'm not looking for a dyno queen, just a nasty pavement pouder.
05-15-09, 04:43 PM
#6192
Talked to Long today and he has most of the little nick nack stuff ordered to finish the turbo install. Should be boosting by next week If I can get my apex seals and solid corners, the 4 port 13B bridge will be put together. I have new side seals and springs, new 3rd gen corner springs, new rotor and stationary bearings just waiting. I still haven't decided to use my 8.5 rotors, or the 9.4s. With the old streetport and 9.4s, running 14 psi, that thing was nasty fast. I'm not looking for a dyno queen, just a nasty pavement pouder.
If I can get my apex seals and solid corners, the 4 port 13B bridge will be put together. I have new side seals and springs, new 3rd gen corner springs, new rotor and stationary bearings just waiting. I still haven't decided to use my 8.5 rotors, or the 9.4s. With the old streetport and 9.4s, running 14 psi, that thing was nasty fast. I'm not looking for a dyno queen, just a nasty pavement pouder.
05-16-09, 03:51 PM
#6195
Well took my Mikuni apart today and to my surprise it has 200 main jets and 240 air jets, F9 e tubes and 62.5 idle air jets so thats good to say 10 psi or more and be safe. So this is so cool , me and Sam is going to get some 210s and 220s and maybe 230s for the mains. So BOOST is coming 
Last edited by LongsTurboFB; 05-16-09 at 04:20 PM.
05-16-09, 06:18 PM
#6196
Well took my Mikuni apart today and to my surprise it has 200 main jets and 240 air jets, F9 e tubes and 62.5 idle air jets so thats good to say 10 psi or more and be safe. So this is so cool , me and Sam is going to get some 210s and 220s and maybe 230s for the mains. So BOOST is coming
05-16-09, 07:16 PM
#6197
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
5-600 i believe Tim is Josh's goal. As well as mine. Corner seals showed up from Atkins yesterday. The rest of their goodies will hopefully show Monday. Then it goes together.
Anyone want to go to a SCCA event at Road Atlanta with us on May 30 and 31st? Camping at the track Sat night. PDX, A good enduro race to watch and lots of other racing.
Anyone want to go to a SCCA event at Road Atlanta with us on May 30 and 31st? Camping at the track Sat night. PDX, A good enduro race to watch and lots of other racing.
05-16-09, 09:10 PM
#6198
Thanks Tim I hope it holds together . Shooting for at lest 500 or more on 20-30 psi Dave are you going to run one piece or two ?? In the new motor?all my turbo parts should be here this coming week. And Dave I may like to tagalong for the SCCA Event. Still looking for a FD. lol
Dave are you going to run one piece or two ?? In the new motor?all my turbo parts should be here this coming week. And Dave I may like to tagalong for the SCCA Event. Still looking for a FD. lol
05-16-09, 09:16 PM
#6200
Thanks Tim I hope it holds together . Shooting for at lest 500 or more on 20-30 psi Dave are you going to run one piece or two ?? In the new motor?all my turbo parts should be here this coming week. And Dave I may like to tagalong for the SCCA Event. Still looking for a FD. lol
Dave are you going to run one piece or two ?? In the new motor?all my turbo parts should be here this coming week. And Dave I may like to tagalong for the SCCA Event. Still looking for a FD. lol
around what im shooting for
