LongsTurboFB

iTrader: (4)

BigIslandSevens

iTrader: (4)

well, you could try and actually work on your car yourself instead of begging everyone else to do it for you. I mean we only had to buy the tools to work on the cars in the first place, know what we are doing, and completely take the turbo apart and then put it back in. . Then there is the compressor and air grinder used to port. ( or dremel, whatever Sam uses..) Soo yeah 100 bucks is hardly worth it to you. 100 is barely worth it to me. But by all means spend the money drifting and on tires instead... Damn kids!!


Anthony: Your car gets final paint on Saturday. finishing up primer sanding tonight and mounting the mouldings for the booth Sat.

rx7 SE

iTrader: (5)

^^^Woohooo!! So, ya think ur friend can cut me a deal in doing the inspections? I figured I should get that done now because of the new operation slow down, I can guarantee they'll get me now, lol

wfo91rx7

iTrader: (1)

lol well now dave. i threw the front bumper back on the cavalier today to get an idea of the fitting of everything and make sure i wasnt gonna have to cut the widebody to hold the 19s. took a few shots. i know everybody loves seein this car but its my project i have going for now.

BigIslandSevens

iTrader: (4)

We can get it inspected but the price is set by the state. As an inspector myself, the shop and tech make hardly anything doing them. I make .15 of an Hour flat rate to do them. But we can get it done for sure when you get a NC plate.

BigIslandSevens

iTrader: (4)

Watch out for the 5 gallon buckets you have in your yard.

BTW: If anyone needs tires changed get ahold of me. I have my tire machine operational once again No John they are not free

wfo91rx7

iTrader: (1)

lol dave mine will just scoop it up. lol this ones a reflector collector.

rx7 SE

iTrader: (5)

Woops my bad, I didn't mean like price wise. I just know for a fact my car wouldn't pass anytype of inspection, I have my air pump and cat (with the cones) but I'd rather not put them in if I don't have to.... probably just need to fix my horn huh

BigIslandSevens

iTrader: (4)

he doesn't check that crap on my stuff. Not worth it for the 13.60 the state charges And since no sniffer is done it is straight forward. Just get me a NC regy and I will get it done when ever you are ready. Hell my FD passed everytime although I did have an aftermarket airpump on it

blackdeath647

iTrader: (2)

bumble bee is back!!! except in a 12a and not a 13b version.

Jeezus

iTrader: (4)

Can't wait to hear it rip Smokey!

I keep getting PM's titled "wheels", but its always about LE wheels, and not the Eagles.

bad 83

iTrader: (3)

Not just to quote what Dave just said, but I would want $100 to do it if you just brought the turbo.

Anyway, I redid my vid that YouTube pulled the audio on so here's the new link http://www.youtube.com/watch?v=Lm1Yx...eature=channel

dj_silencer200399

iTrader: (2)

wow dave y dont u say that again without sounding like such an *******?

blackdeath647

iTrader: (2)

i'm sorry for breaking in, but they're right, they're actually doing it extremely cheap, take your car to a shop and tell them to do the same thing, see how much they charge. the only cheap way to do work on your car is to do things yourself, that way, if you **** up, it's your own **** also.

wfo91rx7

iTrader: (1)

wow someone fell out of the bed and bumped there head this morning.

Jeezus

iTrader: (4)

I got bored and found out that I can run the electric cutout, through a relay, and activated by a MSD RPM switch.


mmmm hit 5000rpm and BAAAAAAAAAAAAAAAAAAA

BigIslandSevens

iTrader: (4)

Well, you just can't sugar coat everything.

robs_seven

iTrader: (1)

+1 for dave

rx7 SE

iTrader: (5)

Don't mean to jump on ya DJ but when I looked up getting my wastegate ported by a shop the labor time is flat rated at 8 hours and most shops charge something of $80-100 an hour at least. With simple math you can tell how much of a favor 100 bucks is (about 90% less). If I were you I would jump on that offer is quickly as possible because it's a whole lot of work to port that wastegate. Either way, just throwin in my 2 cents.

So Dave!!!!! Will I be able to pick her up or check her out on Saturday or does the paint need to cure for a couple days?

BigIslandSevens

iTrader: (4)

Ant: you should be able to come by on Sunday and we could go look at it. It needs to cure at least overnight because it will be like candy and will be hard to keeps hands off of. So, it has to be dry all the way No fingerprints in clear for meIt will take a little longer since it will most likely be raining, however that keeps dust in the air to a minimum which is good.

rx7 SE

iTrader: (5)

Sweet! Sunday it is, I'll pm you after I get out of church.

bad 83

iTrader: (3)

Hey Dave, did you get a chance to see about making the 13B inside decal? Just checking.

LongsTurboFB

iTrader: (4)

Yes the first Bumble bee that I did was in a black on black 87 rx7 and I had my black t2 and a t2 look a like that had the 13bee in it. ( Black death647 ) has road in it.

BigIslandSevens

iTrader: (4)

I printed it out to take in to them but then i slept and forgot about it. I'll try to do it this weekend

dj_silencer200399

iTrader: (2)

i wasnt tryin to sound mean im just sayin im not just paying to hand u my keys and walk away i wanna c how its done so that in the future i wont have to ask again....not only that but until i go to college i cant do work on my car at my apt they're real **** about it. and yes i do know that its an expensive job. thats y ive been asking for HELP not begging for someone to do it. and as far as wasting tires dave im not drifting im goin to watch so it might help if u had the facts straight b4 u started judging how others spend their money.

Stu:thanks for your help and next sat is cool man