LongsTurboFB

iTrader: (4)

My new Atkins One Piece racing Apex seals

LongsTurboFB

iTrader: (4)

And more

LongsTurboFB

iTrader: (4)

One more I promise

Jeezus

iTrader: (4)

Those are lookin good Josh! When will the motor go together?

Hey Dave, I have a first gen Haynes manual at the house you can use. Here are some FSM's:

http://foxed.ca/rx7manual/manuals/19...g_Diagrams.pdf

LongsTurboFB

iTrader: (4)

My new Apex seals have been Cryo Treated and harden, so I hope to make good power and it all hold together under boost, But that will be after i get them file fitted to the rotors, Every part in the motor is new but the rotors, So I hope to make 400RWHP at 20 or so PSI

LongsTurboFB

iTrader: (4)

Hey Stu when will be a good time to come and get my LE wheels? I will be AT Sam's around 3:00 I hope

LongsTurboFB

iTrader: (4)

Stu I hope to put the motor together this coming weekend if all goes well, I still have to port the rotor housings / Do u want to come up when I put it together??

BigIslandSevens

iTrader: (4)

thanks Stu, That's what i needed

400RWHP.. what turbo are you going with? When I go Wbody I will have either the REW in it or a another B series engine

workinprogress80

Hey speakin of that slow down thing...Dave would your wife be willing to help out a fellow 7 owner with a ticket???

LongsTurboFB

iTrader: (4)

Man it is going to be hard to file these Apex seals since they have been Cryo harden, and I have to get them a min of .015 inches less of the rotor housing for the correct clearance. But Atkins say that depends on the amount of heat /boost I will be running. Since they expand when heated, and I do not want them to expand in to the end plates.

BigIslandSevens

iTrader: (4)

What was it for? how much over? There is only soo much that can be done at a certain point

LongsTurboFB

iTrader: (4)

Dave I have not decided yet I have a t3 t4 on it now but I have a t70 big shaft/ and a gt45 so for now I will go from there

BigIslandSevens

iTrader: (4)

you have a garrett gt45? How much you want for it? I know, I know, the widebody but really,.. intrested in getting rid of it?

Jeezus

iTrader: (4)

Thats awesome Josh. I won't be home until later tonight though. I am looking for a set of LE wheels for me as well, then send them off to get widened

No problem dave, If you need the haynes let me know.


PS: Josh, give me turbo!

bad 83

iTrader: (3)

And what would you do with it Stu? Anywho, I am still going to put my engine back together. I am NOT using 3 piece apex seals anymore. I still want to bridge the TII engine, but I don't know if the Rtek 2.1 would work with it. As it stands right now, the Rtek seems the way to go. I just need another rotor...........

BigIslandSevens

iTrader: (4)

I have a very clean set of s4 T2 rotors that i can sell. Matched weight, also have the e-shaft and front weight

RotaryPicha

iTrader: (2)

Let me know how that Rtek works with u Sam. I want to get the S4 N/A version.

rx7 SE

iTrader: (5)

Those wouldn't be mine would they?!!

workinprogress80

it was for 52 in a 35

rx7 SE

iTrader: (5)

^^^ well crap, I guess it's a good thing I haven't had my car cuz they're really crackin down

BigIslandSevens

iTrader: (4)

I knew I should have PM'd that

Jeezus

iTrader: (4)

use it dur

BigIslandSevens

iTrader: (4)

100 bucks and she'll deal with it. What other violations have you had and when? PM those if you want. If you can fax or bring us copies of the ticket and such she can deal with it. She has to go to Iredell for a DUI case this Thursday and can try and deal with it then.

Let us kow.

morepower29

I would like to find a complete motor. I'd almost be willing to trade the running gtu for a good TII motor and all components.

workinprogress80

dave-pm sent