rx7 SE

iTrader: (5)

Hey Dave, if i get you the stuff for my car friday morning would it be finished before sunday ya think?

Jeezus

iTrader: (4)

By this weekend?!

Jeezus

iTrader: (4)

Yeah, should be. Shouldn't take more than a few hours to put on that GT35


That IS what you are talking about, right?????

rx7 SE

iTrader: (5)

No no no... talkin bout the PPorted 20B son! lol

bad 83

iTrader: (3)

Josh, are you wanting just the upper? Or both? Anywho. I think the plan is going to be meet at O'Charlie's then go to Lake Norman. Sound fine guys? Kent, I wish you had time to swing by the house before the meet. That way you and Chris could check out the new "heart" for for the FB

BigIslandSevens

iTrader: (4)

I hope so, I was working all day yesterday on yours, mine, Mike's FD etc.. It was a big day yesterday.

Only thing I can see that might not get done by then is wet-sanding since the touch up spot will need to cure for a day or 2 first, But it will be at the meet one way or another!!

Josh: You need a Snell 2005 or newer rated helmet. Usually has a tag on the inside of the helmet stating it. If it is a Motocycle helmet it needs the 2005 or newer rating. The M95 rating is no longer excepted.

We have helmets at work that meet the rating. I got mine for just over 100 bucks my cost. Black is the cheapest color to buy

gsl-se addict

iTrader: (3)

Hey Sam,

If we can get an early start, then we could probably swing by and head over to the meet together. Chris isn't 100% sure on coming, but is likely to come. He hasn't been to any meets yet and really wants to hit one.

Anyone intested in a parts swap meet of sorts?

I need:
- 84-85 fuel level sender
- S5 NA vac solenoid rack
- maybe a good GSL-SE fuel pump

I have:
- S5 NA tranny
- 81-83 12A tranny
- S2 interior stuff, black (steering column surround, radio surround, etc.)
- some GSL-SE stuff (AFM, couple ECUs, engine harness, vacuum switch, etc.)
- pair of S4 NA injectors
- pair of S5 NA injectors

bad 83

iTrader: (3)

Kent, that's cool if you can swing by the garage first. Do you still have my number? I may have the vac rack for you. I have a bunch of S4-S5 junk lying around. Just give me a call if you want to come by early.

gsl-se addict

iTrader: (3)

Yep. Still have your number. I'll probably give you a call on Saturday and let you know what the plan is. I can adjust my time leaving to give some time to come by before the meet.

wfo91rx7

iTrader: (1)

Sam: just the upper i have enough 6 port manis layin around.

BigIslandSevens

iTrader: (4)

HEy Josh, Carefull over there this weekend. I heard from a client in the Lake Lure area that is was snowing there earlier this evening. Should make for some nice pics if the parway is open.

My pattern for the night is,..Mud, sand, Mud, sand, mud, sand, prime, blocksand...

So i painted those S4 lights up bitchin for nothin then Ant?Goin S5 huh... Just playin. I like both. I have to remember to bring home the mounting tape so I can attach you side moldings for the meet.

I should get my turbine housing back on Friday.. Keeping my fingers crossed. This guy can supposedly weld anything you can dream up.. Might be a good connect. A bit far though, almost to Asheville.

robs_seven

iTrader: (1)

Where did you get it welded Dave, we used to use a welder south of asheville that could weld any material and any size


So are we meeting at Ocharlies?? and where are we going from there??? Just trying to plan my day and saturday night

Jeezus

iTrader: (4)

Meet at OCharlies then when everyone gets there we head to Lake Norman. I say we will probably leave OCharlies around 1:45?

BigIslandSevens

iTrader: (4)

I am not really sure what his business is called. He does all the goldwing Frame weld recalls for us. He is located an exit or 2 this side of Black Mountain. I believe his name might be Jack/John. He is the stepdad of one of our salesmen/shiezters

That rear panel is starting to take the original shape back Ant. I should have it ready late tonight or tomorrow after work as far as getting the body straight again. My camera is dried out but the batts went poop. I'll grab some pics tomorrow for ya.

bad 83

iTrader: (3)

That's what I was thinking too. Sounds like we are going to have a good time

rx7 SE

iTrader: (5)

Awesome! What time do you want me to be there on friday?

ROTORX7Holly

Here is something else you Xroads guys have to put in your schedules, if you are diehard rotorheads, you would not miss this:


Mazmart 1st Annual Rotary Meet & Greet Jan 31st

To all Rotorheads. We are planning our 1st Annual Rotary gathering on January 31st. Festivities will start at 10am. Here is just a little of what we have planned...
-Tech Seminar with world famous Rotary Engine builder Rick Engman, followed by Q&A
-Tour of Rick's engine shop & machines that he uses for rebuilds
-Tour of Mazmart Facility
-Catered Lunch
-Tour of our parent company (Downing of Atlanta), home of the HANS Device
-1 or 2 race cars from famous RX8 race team
-Guest speakers
-Door prizes & giveaways
Our facility is located at 4917 New Peachtree Rd, Chamblee, Ga. 30341
PM Gotnortr on the Rotary Car Club Forum for any questions or details.

dre's customs

iTrader: (2)

wow holly that sounds like a really fun time as well. well guys, im in the mist of trying to work in between rain showers, i need to clean out my garage so i can work on cars inside. ive gotten my tach swapped over, all interior(pedals, shifter, etc) finnished, drive shaft removed, crossmember removed, and I have gathered all of the parts i need, im just running low on time and energy. im hoping i may have a little time with you guys, but im shure im working this sunday as well, who knows im shure im gonna wait on yal. its amazing what kinda jobs you will revert to when things get tight. but we will see. i would like for my car to at least be there for me, but it aint looking good. stu came and helped me one day but it down poored on us so we really didnt get anything done. if anyone wants to help me yank that waste of space of a trans out from under my car it would be greatly appreciated. i may even have a beer with your name on it. aint that right stu. lol we will see what happens Im hoping for the best.

BigIslandSevens

iTrader: (4)

Not sure. You can swing by my work today if you like and drop of the supply money and tails if you like. If not sometime around 1 will probably work.( Paint supply store closes at 5) Not much else to do to the car except test the tails fittment.

dj_silencer200399

iTrader: (2)

Yeah Dave i'm in the same boat Andre is, i have to work at 5 so i'm really only gonna be able to chill at ocharlies until you guys leave, so if u can i dont wanna be excluded from yall';s photo shoot so snap a few pictures of all the cars there with mine if you can as well as just my 7.

bad 83

iTrader: (3)

Finally got my wiring harness done! Yeah! I can now start on getting the engine built



Check engine light box......




Left over wiring not needed

workinprogress80

either im missin somethin or it looks like the engine is already built....

Jeezus

iTrader: (4)

Sam proves it once more you really can polish a turd

I got work tomorrow dre, saturday I am free.

Also, autocross on feb 15 at carowinds. Anyone besides me and Josh goin?

RotaryPicha

iTrader: (2)

I wanna go to the autocoss. And Sam nice, but im with Cory.

robs_seven

iTrader: (1)

Im hoping to have my shocks and get my suspesion setup and hit the autox on the 15 my self