Jeezus

iTrader: (4)

oh man. I am going to bed now lol.


Will paint my rear emblem tomorrow...

blackdeath647

iTrader: (2)

^^ let me know how that goes, i'd like to see the finish product

Jeezus

iTrader: (4)

It is getting all spider webby, I will have to get some super fine grit sand paper to clear that up. I got about 4 coats of high gloss black on it so far


On a different note, I changed the oil in my sisters Mazda3 today. Holy crap, they do not want you working on your own car anymore! I couldn't find where to put the jack at. You have to remove the big underbody tray to get to anything. Well, nothing to put the jack on but the subframe... way in the back! Busted out the ramps... that will scrape the bumper. Nothing like doing it on the ground with 5" of clearance

bad 83

iTrader: (3)

So Stu. Did you ever get a chance to get the rest of the TGPR video uploaded? I was wanting the video you took of me down there

Jeezus

iTrader: (4)

No not yet, I still have it on my camera. When the internet on the livingroom computer works I will load it up. Thats the only comp with the card reader

bad 83

iTrader: (3)

You could burn it to a disk, then transfer it to the other computer........

Jeezus

iTrader: (4)

So many memories of my old SA here:

http://charlotte.craigslist.org/car/751274402.html

bad 83

iTrader: (3)

Dang Stu. That is a killer deal on that SA. I was looking on Craigslist the other day and found a couple of deals.

http://charlotte.craigslist.org/cto/794803099.html

http://charlotte.craigslist.org/pts/790346339.html

http://charlotte.craigslist.org/cto/789915548.html

http://charlotte.craigslist.org/cto/789731608.html

http://charlotte.craigslist.org/car/782663942.html

bad 83

iTrader: (3)

You should watch what you say.........Brap...Brap!

wfo91rx7

iTrader: (1)

if any of you guys are bored tomorrow our car club is having a meet in hickory. info is on our website just click on the link below my sig and check it out.

RotaryPicha

iTrader: (2)

Dave i'll be there today. hope you dont leave to early

bad 83

iTrader: (3)

Andre came by last night and we wired a relay to his e-fan. Just dumb luck running into him at the store! He finally got to see the Turbo FB first hand. I told him about the torrid history behind the old girl. Where she came from, and how she got to where she is now. If Andre of anyone else is interested, here's the build thread fo the old girl.......https://www.rx7club.com/showthread.p...roject+updates

RotaryPicha

iTrader: (2)

Hey Dave can I go by your work tommorow after i get out? I can be at your work like 4- 4:15

Jeezus

iTrader: (4)

Internet works again. Should have the video up by today sam.

BigIslandSevens

iTrader: (4)

No problem at all. I'll make sure I stay there until 5 at least I promise

I wired up and installed the e-fan! Looks like it was supposed to be there. Thanks for the deal Sam. I chose to install a adjustable thermostat relay set-up. It allows you to turn the fan on earlier or later. I will get my thermo gun from work and see what it turns on at tomorrow. This relay also gives the option for turning on the A/C fan when it needs it. And since Elizabeth has expressed the desire to have a/c again this worked out well.

Jeezus

iTrader: (4)

Bah, who needs AC?

Jk, awesome set up man. I wouldn't mind doing something like that for mine, since it is hooked to a toggle switch.

BigIslandSevens

iTrader: (4)

37 bucks from auto zone.About the same from Advance. Only real thing i don't really like is that the temp probe just gets wedged into the fins

I set the fan up to run on the hhigh speed motor, that thing pulls some freakin air. I had a miny tornado od plastic shreds under the car when it was running

Jeezus

iTrader: (4)

Haha. That is awesome! I am thinking of taking mine on high for the summer around here. It gets pretty hot.

EDIT: I believe it was Ray who made the upper rad hose for a temp gauge.

robs_seven

iTrader: (1)

I made the aluminum insert that goes in the top rad hose right after the water pump and also made one for bryan at rotorsports that went in the rear heater hose.

also warning on the high speed on the tarus fan, it roasted my relay twice. not sure why but melted the crap out of it

Jeezus

iTrader: (4)

Because you need a 50A relay

t_g_farrell

iTrader: (1)

Posted some pics from the Raleigh meet I went to the other weekend.

https://www.rx7club.com/showthread.p...91#post8474191

t_g_farrell

iTrader: (1)

Silly ricers. Guess what kind of cars they were driving? Thats right hondas.

http://www.charlotteobserver.com/100/story/133075.html

RotaryPicha

iTrader: (2)

All Honda's very funny. Glad nobody got hurt. I know Zak used to meet up at the parking deck with a couple of people, he invited me once.

Jeezus

iTrader: (4)

I went to his meets a few times. Cool people, didn't really hang out with the ricers much though.

blackdeath647

iTrader: (2)

any updates on the twin project?