I was there for the CMRC race at Dover..

I'll be in Barbados in August for the next race meet..

 

Yeah maybe.. Not as young as I used to be..
But it is nice to just command 30psi or whatever boost you want in the ecu and be done with it...
Time is valuable and I don't like to waste it doing stupid things that aren't necessary...

 

lmao...I hope I get them running right then. I better brush up on my calculus.

 

Ok, Put in the new TIAL gate and need to figure the springs out. It is a major pain in the *** were my gate sits to keep swapping springs, I also hate the TIAL clamps. Like the reg v-band clamps better because they are easier to install.

So on the springs.

I had the chart from thier site that shows the springs and what combo you need to reach desired gate opening. I wanted to set it to 14.5 psi. Added those (3 springs) springs and it doesnt open even at 20psi. I dont want to have to try all 6 springs in differant combos.

Anyone know what spring to use to get anywere between 15-17psi?


http://www.tialmedia.com/documents/MVRSPC.pdf

 

it may be down to gate placement now , unless its installed wrong spring wise what else could it be, options fellas ?

 

All I know is when I installed the 3 springs it was very very hard to open valve compared to my synapse. I was in doubt even before I installed the gate. Double checked the web site. Guess I will just have to keep trying different springs.

 

ahhh i get ya , your not colour blind, because i am and those colours are going to stump me when i get mine off enzo soon hahaha , ill be looking to slap in 21 psi worth of springs and it looks like i have to get 4 springs in there hmmm

 

Tried the largest paired with smallest and got .9 bars. Close enough. But is been along time since I have heard my gate open.


When gate opens around 13-14psi it quickly drops back to 10psi, not really liking that. I hope it can hold 30 psi. Migh have to put a little More spring in.