|
Big congrats guys. This is some great shit
|
Originally Posted by turboR1
(Post 9523271)
Ok so heres the info on the passes. After fiddling with a mixture of tire pressure, rpm and burnouts I progressively did better each run.
First Pass 60' 1.718 330 4.542 1/8 6.780 MPH 107.06 1000 8.705 1/4 10.307 MPH 142.18 Second Pass 1.644 4.439 6.658 108.50 8.557 10.143 143.52 Third Pass 1.554 4.288 6.453 113.58 8.371 9.965 143.02 Fourth Pass 1.465 4.156 6.354 114.32 8.262 9.852 142.99 I just counted all my time slips. If you dont count the Gt35 run last year, my 9th time ever on the strip got me in the 9s :). And then I backed it up with another one. Thanks for all the comments guys. Natural born racer!!! :icon_tup: |
How much boost were you making on the two-step at the line?
and at what rpm where you leaving at? Thanks! -J |
You're using the ACT extreme pressure plate and a 6 puck I assume? I'm really surprised that it's holding up this well. Although, this isn't the only thing that you two are surprising the rotary world with. What's you're tire pressure stage down to? Have you measured your tire temps or just go by burnout duration?
|
Absolutely sick!!!!!! Congrats!
|
YAY! I love stock block builds.
I've been reading some impressive shit lately. KA24de Nissan engine stock block made 500+ RB20det 240sx Put together using 2 blown rb20's stock rebuild. (only mod is crank collar mod) And the guy is in the high 10's. Stock evo blocks reaching 600 Stock block vg30et reaching nearly 500 n/a or turbo. even stock headgaskets. 13 head bolts per head in these vg30e's is no joke. stock block h22 making 422 whp in my town. Stock non vtec b18 made 320whp in town How many more stock blocks can hold past 400? Probably all of them=P With the right tune. |
Thats pretty sick man nice work.:icon_tup:
|
Awesome runs, congrats!
|
Enzo,
Whats that car weigh? |
GREAT JOB GUYS !!!!!! very nice you got my vote :icon_tup:
enzo does it again ........:icon_tup: |
Originally Posted by junito1
(Post 9526569)
YAY! I love stock block builds.
I've been reading some impressive shit lately. KA24de Nissan engine stock block made 500+ RB20det 240sx Put together using 2 blown rb20's stock rebuild. (only mod is crank collar mod) And the guy is in the high 10's. Stock evo blocks reaching 600 Stock block vg30et reaching nearly 500 n/a or turbo. even stock headgaskets. 13 head bolts per head in these vg30e's is no joke. stock block h22 making 422 whp in my town. Stock non vtec b18 made 320whp in town How many more stock blocks can hold past 400? Probably all of them=P With the right tune. |
What fuel pump(s) are you guys using to feed all that power?
|
Originally Posted by junito1
(Post 9526569)
YAY! I love stock block builds.
I've been reading some impressive shit lately. KA24de Nissan engine stock block made 500+ RB20det 240sx Put together using 2 blown rb20's stock rebuild. (only mod is crank collar mod) And the guy is in the high 10's. Stock evo blocks reaching 600 Stock block vg30et reaching nearly 500 n/a or turbo. even stock headgaskets. 13 head bolts per head in these vg30e's is no joke. stock block h22 making 422 whp in my town. Stock non vtec b18 made 320whp in town How many more stock blocks can hold past 400? Probably all of them=P With the right tune. Anyways congrats on the time.:icon_tup: |
Originally Posted by Gohan3rdrift
(Post 9530798)
What fuel pump(s) are you guys using to feed all that power?
|
Originally Posted by ErnieT
(Post 9529581)
Enzo,
Whats that car weigh? |
Congrats! Very impressive!
|
Originally Posted by turboR1
(Post 9531240)
Its full interior Ernie. The only things I removed was the spare tire and jack which already weigh nothing and the A/C is out. My car has 33k original miles and still smells new inside which is why I dont want to put a cage in it either. Its an R1 So I think im right around 2700. It used to weight 2620 but the 45lb turbo and manifold and the rest of the "junk" i added put on some weight.
|
ATCO Raceway Baby!!!
|
Originally Posted by ultimatejay
(Post 9534058)
How do you get by tech without a cage and still make 4 passes?
|
Much respect to you turbor1 & enzo ;-)
|
awesome!!!! technically this is done just with bolt ons as the engine is untouched
|
I want to see pics of under the hood. Curious how the mani fit.... Tire size? 10.5 or 11.5?
|
Originally Posted by flaco
(Post 9530348)
those hondas in your town are pretty damn slow no offense
Non taken flaco. Pero loco. We are in hick ville here. JAcksonville sucks for a rotary owner. I was just pointing out that stock block builds rock. Plus that honda has many wins against cobras and nitrous camaros and Ws6's. More than i could say about my TII. YOu should come up here and show these rednecks what a rotary is about=) |
Originally Posted by sk8world
(Post 9544898)
I want to see pics of under the hood. Curious how the mani fit.... Tire size? 10.5 or 11.5?
|
Originally Posted by sk8world
(Post 9544898)
I want to see pics of under the hood. Curious how the mani fit.... Tire size? 10.5 or 11.5?
Here's the thread, it's interesting seeing the build and comments when no one knew how much power it would make or what time it would run. https://www.rx7club.com/single-turbo-rx-7s-23/another-bw-475-project-816447/ |
That's just a disgusting car. Congrats yet again. :icon_tup:
|
Yeah that was fun.. :)
Maybe SpeedNYC could come out of retirement and post a new build thread of his own.. hehe.. |
Originally Posted by enzo250
(Post 9545480)
Yeah that was fun.. :)
Maybe SpeedNYC could come out of retirement and post a new build thread of his own.. hehe.. |
Originally Posted by SPEED_NYC
(Post 9545537)
you know enzo, i think you're right. it's about time to dust the car off and bring it back to life :)
|
He may want to ask his "Daddy" first....:D
|
didn't read it anywhere else, are you guys still using straight e85, or was this tune on race fuel?
|
yes ethanol
|
Originally Posted by SPEED_NYC
(Post 9545537)
you know enzo, i think you're right. it's about time to dust the car off and bring it back to life :)
2010 is going to be a good year! |
congrats to all involved. this is very impressive stuff ... a 9-second stock block REW! even i know that that's not easy.
|
I just saw a white FD behind me in a trailer on the LIE heading to Enzo's shop, something is up!!!
|
Something tells me that he's going to order the same meal my brother ordered.... :)
|
I know Roan is a big guy and all but im just not too sure hes ready for the supersize fries, especially since hes been retired for so long. He might have to start with the kids meal first and work his way up :biggrin:
|
Just don't forget those extra braided lines....;) Roan's big butt will need em...
|
Yeah I have plenty of those in stock... :)
|
build thread comming tomorow with lots of pics
|
I got the meat for your burger setting on my table here!
|
Originally Posted by 13B-RX3
(Post 9548899)
I got the meat for your burger setting on my table here!
|
Just to clear up some things up here.
This is a pm I recently received. "I know it is a stock motor. has the motr been opened? Did you guys change the apex seals? Upgrade oil press? How "stock" is it. Basically i just wantto tknow the info so when i pass the word of a "stock" 13brew making over 600whp and runing 9.85's. " I'll answer them in order NO NO NO as stock as it comes from the factory its makes well over 700rwhp and I went 9.8 with only about 610-620rwhp 28psi and YES it is also a bone stock unopened transmission actually from the same engine and the car has stock suspension. full interior. When this motor blows up I will video tape the disassembly so everyone can see for themselves what was inside. All the haters can actually come down and take it apart for me :) We'll make it a bbq party. |
impressive, there shouldnt be any rotary haters on this:scratch:
|
I heard your running NOS? And MoTeC Exhaust...
|
Let me know on the BBQ PARTY I'll come down to eat and watch the HATERS take it apart LOL
|
Originally Posted by enzo250
(Post 9550419)
I heard your running NOS? And MoTeC Exhaust...
|
Originally Posted by SPEED_NYC
(Post 9548909)
cool. we gonna meet up on saturday still?
I have not received my invite but as soon as i do i will let you know :icon_tup: |
I'll take a flight just for this one. lol
|
i know what it is, Seafoam, and Pulstar Pulse plugs. cheatin bastards.
|
| All times are GMT -5. The time now is 08:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands