ran my best et last night !!!!
#1
ran my best et last night !!!!
well looks like i'm kinda gettin somewhere, ran a 10.10 @ 134 mph w/ 30 psi
been having alot of drivetrain issues thanks to http://www.driveshaftshop.com/
I am no longer having problems w/ my axles, as for tranny ???? thats a different story, but thanks to "JAPAN2LA" I have them at my disposal iv'e been through at least 5-6 this year but i'm not gonna give up I'm gonna run mid to low 9's w/ a factory tranny/rear cuz I find it to be an ultimate challenge and I love a CHALLANGE. it's not gonna be easy, only time and broken trannys
on a side note this is the same motor from almost a year ago go ROTARY !!!!
been having alot of drivetrain issues thanks to http://www.driveshaftshop.com/
I am no longer having problems w/ my axles, as for tranny ???? thats a different story, but thanks to "JAPAN2LA" I have them at my disposal iv'e been through at least 5-6 this year but i'm not gonna give up I'm gonna run mid to low 9's w/ a factory tranny/rear cuz I find it to be an ultimate challenge and I love a CHALLANGE. it's not gonna be easy, only time and broken trannys
on a side note this is the same motor from almost a year ago go ROTARY !!!!
#3
1.51 60 ft
6.47 1/8 111 mph
still having rubbing problems fixed the fender problem, now rubbin inside the upper fender well jus need to raise the rear about 1/2 inch or so
can't wait to run 35psi + jus need to fix the rubbin problem first
and a lil FYI 2772lbs w/ driver
6.47 1/8 111 mph
still having rubbing problems fixed the fender problem, now rubbin inside the upper fender well jus need to raise the rear about 1/2 inch or so
can't wait to run 35psi + jus need to fix the rubbin problem first
and a lil FYI 2772lbs w/ driver
#6
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
Congrats on your best time. Congrats on the HP too, I remember you were making over 700HP on stock ports.
I just ran my best as well 10.32@139MPH. Can you post your entire slip to compare?
Here is mine, my MPH was very low on the 1/8th compared to yours. My car weighed 2866 at the 10.3 pass.
60ft - 1.507
330 - 4.388
1/8 - 6.723
MPH - 104.31
1000 - 8.702
1/4 - 10.326
MPH - 139.47
Anthony
I just ran my best as well 10.32@139MPH. Can you post your entire slip to compare?
Here is mine, my MPH was very low on the 1/8th compared to yours. My car weighed 2866 at the 10.3 pass.
60ft - 1.507
330 - 4.388
1/8 - 6.723
MPH - 104.31
1000 - 8.702
1/4 - 10.326
MPH - 139.47
Anthony
#7
Congrats on your best time. Congrats on the HP too, I remember you were making over 700HP on stock ports.
I just ran my best as well 10.32@139MPH. Can you post your entire slip to compare?
Here is mine, my MPH was very low on the 1/8th compared to yours. My car weighed 2866 at the 10.3 pass.
60ft - 1.507
330 - 4.388
1/8 - 6.723
MPH - 104.31
1000 - 8.702
1/4 - 10.326
MPH - 139.47
Anthony
I just ran my best as well 10.32@139MPH. Can you post your entire slip to compare?
Here is mine, my MPH was very low on the 1/8th compared to yours. My car weighed 2866 at the 10.3 pass.
60ft - 1.507
330 - 4.388
1/8 - 6.723
MPH - 104.31
1000 - 8.702
1/4 - 10.326
MPH - 139.47
Anthony
330 ft "none"
6.4704 1/8 mile 111.81
8.4341 1000 ft mph "none"
10.1077 @ 134.25
trap speed is low due to rubbin, it's so bad that my foot almost came out of it
Trending Topics
#9
didn't miss much, after i lost to a 10.30 honda. I got pissed and wanted to lay down a 9 sec pass durring there victory pic lol....... and if I didn't have the rubbin problem I would of had it, o well there will be another day soon to come. all good tho it's all about racing !!!!!
#12
for me i'm @ 680-700 whp @ 30psi, but if you take the avg hp for the 1/4 mile pass it comes to about 600hp due to i'm not runnin 30 psi from the start i'm runnin 9-10 psi (2-step) it's prob a lil lower than that, thats why i'm goin to a ball bearing turbo soon .so that my avg hp will increase therefore quicker/faster et & mph that or good ol "NOZ" one or the other, or both !!!!!
but before all of that need to get the "car" off the tire
but before all of that need to get the "car" off the tire
#13
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
for me i'm @ 680-700 whp @ 30psi, but if you take the avg hp for the 1/4 mile pass it comes to about 600hp due to i'm not runnin 30 psi from the start i'm runnin 9-10 psi (2-step) it's prob a lil lower than that, thats why i'm goin to a ball bearing turbo soon .so that my avg hp will increase therefore quicker/faster et & mph that or good ol "NOZ" one or the other, or both !!!!!
but before all of that need to get the "car" off the tire
but before all of that need to get the "car" off the tire
Mine is the GT42R (dual ball bearing) T6 74mm/1.01 a/r that Im selling
#15
jus need to sell my turbo heres the for sale thread https://www.rx7club.com/race-parts-only-228/fs-precision-76mm-to4-turbo-794142/
good luck on ur sale ernie, i'm sure "our" turbos will sell fast I hope lol.......
#16
Laying Down Rotary Law
great run Lee getting closer! . I got a local tranny specialist that can turn the turbo mazda transmission into a clutchless . Only 1st gear is needed to use the clutch pedal. They was testing the transmission today at the track so I need to find out how it did etc before I can give any pro or cons..
#23
thanks 2 all for the
heres a vid from last month that i found on youtube 10.40 pass I promise to record the 9sec pass !!!!! the funny thing is that i got a hd jvc digi cam,but i'm driving
http://www.youtube.com/watch?v=6qg46wAOVZo&NR=1
heres a vid from last month that i found on youtube 10.40 pass I promise to record the 9sec pass !!!!! the funny thing is that i got a hd jvc digi cam,but i'm driving
http://www.youtube.com/watch?v=6qg46wAOVZo&NR=1
#24
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
So close to the 9's!
I made 586 HP (std) when I went 10.3@139.
Anthony
Last edited by AnthonyNYC; 10-20-08 at 01:20 AM.