The Pit Wall - A Lounge for Drag Racers
10-30-08, 09:43 PM
#803
I've never had the desire to watch that movie.My all time favorite.
http://www.youtube.com/watch?v=69ZEhh6L7DQ
http://www.youtube.com/watch?v=CftpuY5CUWI
http://www.youtube.com/watch?v=-JjII...eature=related
Last edited by 13B-RX3; 10-30-08 at 09:48 PM.
10-30-08, 09:48 PM
#805
come get some.....
iTrader: (2)
Join Date: Dec 2006
Location: bayamon pr, orlando fl, paterson nj
Posts: 1,763
Likes: 0
Received 0 Likes
on
0 Posts
I've never had the desire to watch that movie.My all time favorite.
http://www.youtube.com/watch?v=69ZEhh6L7DQ
http://www.youtube.com/watch?v=CftpuY5CUWI
mang you need to watch deliverance its a hell of a flick
but here you might enjoy this
http://www.youtube.com/watch?v=L7idasRCpA4
11-13-08, 10:32 PM
#813
InsaneRotaries.com
Your kidding right? What was wrong in my post? I said usually when someone doesn't post there results right away something usually went wrong and then I said I hoped that nothing went wrong.... Are you on your period or what? Turns out something obviously came up and then ended up running another car. Nothing more nothing less. Why are you trying to make me look like a bad guy when I have done nothing but show support for these guys???? Take a look at my previous posts in this thread. You make no sense! I will be one of the first guys to buy a set of these rotors for my all motor car that you and Aaron are too good for to post any comments on. What am I not fast or good enough for you guys? And you give Abel **** for not being a team player etc. Hypocrytes you and Aaron are.
Sorry to get off topic timemachines. Good luck. Keeping my fingers crossed.
Sorry to get off topic timemachines. Good luck. Keeping my fingers crossed.
You sent a PM saying that " you now know the type of guy that I am" all because I didn't reply to your first PM. Jay I'm a hard working man just everyone else on here, I have no time to run home & post on the Rx7Club. I reply to PM's when I get time, so that means don't look forward to a reply anytime soon.
There's more to life than this forum and a handful of us actually speak & trade info on a daily basis that we will never post on here.
Your cynical, sarcastic comments is what he's talking about. If you simply ask a question without assuming something negative, then it wouldn't be so bad, but you do the opposite.
You came on my forum with a cynical remark about Major League. You asked a question about if he had broken the record, but your tone it what made it sound cynical. Common sence would tell you that if the record was broken, then it would have been posted on every forum on earth, but you had to be an *** with your reply.
If you wanna debate more, then take it to the pitwall.... Thanks
11-13-08, 10:46 PM
#815
Hey guy, please don't call my name is your BS. How old are you?? You are **** because I did not post on your thread?? Give me a ****** break!!!!
You sent a PM saying that " you now know the type of guy that I am" all because I didn't reply to your first PM. Jay I'm a hard working man just everyone else on here, I have no time to run home & post on the Rx7Club. I reply to PM's when I get time, so that means don't look forward to a reply anytime soon.
There's more to life than this forum and a handful of us actually speak & trade info on a daily basis that we will never post on here.
Your cynical, sarcastic comments is what he's talking about. If you simply ask a question without assuming something negative, then it wouldn't be so bad, but you do the opposite.
You came on my forum with a cynical remark about Major League. You asked a question about if he had broken the record, but your tone it what made it sound cynical. Common sence would tell you that if the record was broken, then it would have been posted on every forum on earth, but you had to be an *** with your reply.
If you wanna debate more, then take it to the pitwall.... Thanks
You sent a PM saying that " you now know the type of guy that I am" all because I didn't reply to your first PM. Jay I'm a hard working man just everyone else on here, I have no time to run home & post on the Rx7Club. I reply to PM's when I get time, so that means don't look forward to a reply anytime soon.
There's more to life than this forum and a handful of us actually speak & trade info on a daily basis that we will never post on here.
Your cynical, sarcastic comments is what he's talking about. If you simply ask a question without assuming something negative, then it wouldn't be so bad, but you do the opposite.
You came on my forum with a cynical remark about Major League. You asked a question about if he had broken the record, but your tone it what made it sound cynical. Common sence would tell you that if the record was broken, then it would have been posted on every forum on earth, but you had to be an *** with your reply.
If you wanna debate more, then take it to the pitwall.... Thanks
This is a perfect example of how biased you are to your PR brothers. You talk all the smack you want on one of my idols- Abel, but if just the slightest bit of talk or sarcasim goes your way to you or your PR racers you cry like a little biotch.
If you're going to talk smack or f around then be a man and take it when it comes back your way. You talked so much **** on how Major league is going to do this and that and f Able's record up yada yada. So when I throw it back, this is what happens. It's always how you want things to go around here. I have said and shown all my respect for the PR racers, Aussies and everyone racing. So I'll tell you what. I won't talk any smack or make smide comments on your racers that you like if you don't talk smack on Abel.. If not then expect the same treatment that you give me back at ya bro.
Last edited by ultimatejay; 11-13-08 at 10:48 PM.
11-13-08, 10:53 PM
#816
InsaneRotaries.com
Yes, I think Crispeed has helped out alot with his "crowd" of people, but I also have seen him shine many people off that have asked him simple questions and I can give many examples if you would like me to. So both of you stop talking like your gods gift to rotary.
Oh btw, no one thinks they're god's gift to rotary.. have you ever seen Chris or me act cocky?? Get real Jay.. Abel is the one who think he's god's give to rotary. He will not give credit where's its due.
For him, performance in measured in 1 pass.. The guys that run the numbers pass after pass, week after week are beneth him, but I have news for Abel.. He's a "has been", he's bitter because he's out of the spot light.. yes he's a record holder, but that was then, his days are over.. One hit wonders don't make it into the hall of fame, maybe they will get a MVP for that season, but thats about it...
You guys are like a bunch of high school chearleaders. I have done nothing but say nice comments on Crispeeds build threads and works in progress etc and most of yours too- except the Able comments. So why no support or responses from you guys in my Rx2 wheelie thread? Are you too good for me because I'm not running a 9 second car?
At least I'm racing unlike you Aaron.
11-13-08, 11:07 PM
#818
Bro I think you got Flaco's **** shoved so far down your throat, that you can't think straight!!!
Do you think Chris will help a pansy that cries when he don't get a reply to his thread?? Of course not!!! The problem is, alot of **** has been discussed in the past, so if those question seekers simply use the search function then they will find their answer. You have a All-Motor car and I think it's a slap in the face for you to start talking **** like this, because Crispeed's info would have been very benificial to you... Oh well, to each is own....
Oh btw, no one thinks they're god's gift to rotary.. have you ever seen Chris or me act cocky?? Get real Jay.. Abel is the one who think he's god's give to rotary including the world record! He will not give credit where's its due.
For him, performance in measured in 1 pass.. The guys that run the numbers pass after pass, week after week are beneth him, but I have news for Abel.. He's a "has been", he's bitter because he's out of the spot light.. yes he's a record holder, but that was then, his days are over.. One hit wonders don't make it into the hall of fame, maybe they will get a MVP for that season, but thats about it...
Like I said before, How old are you??? You get upset because someone don't post in your thread!!! You gotta be kidding right?? Jay I replied to your 9" thread, what more do you want!! Blood??? Guy please don't take out your woman problems on me, I have no time for your childish behavior
What do you want?? A ******* cookie because you race??? When I was racing, you were still pissing the bed!!!!
Do you think Chris will help a pansy that cries when he don't get a reply to his thread?? Of course not!!! The problem is, alot of **** has been discussed in the past, so if those question seekers simply use the search function then they will find their answer. You have a All-Motor car and I think it's a slap in the face for you to start talking **** like this, because Crispeed's info would have been very benificial to you... Oh well, to each is own....
Oh btw, no one thinks they're god's gift to rotary.. have you ever seen Chris or me act cocky?? Get real Jay.. Abel is the one who think he's god's give to rotary including the world record! He will not give credit where's its due.
For him, performance in measured in 1 pass.. The guys that run the numbers pass after pass, week after week are beneth him, but I have news for Abel.. He's a "has been", he's bitter because he's out of the spot light.. yes he's a record holder, but that was then, his days are over.. One hit wonders don't make it into the hall of fame, maybe they will get a MVP for that season, but thats about it...
Like I said before, How old are you??? You get upset because someone don't post in your thread!!! You gotta be kidding right?? Jay I replied to your 9" thread, what more do you want!! Blood??? Guy please don't take out your woman problems on me, I have no time for your childish behavior
What do you want?? A ******* cookie because you race??? When I was racing, you were still pissing the bed!!!!
I may have Abels dick in my mouth but you have every PR racers out there with their dicks in your big mouth.
There you go again talking **** on Abel. Has been? He has been racing rotaries and has been competetive throughout his long career and has given alot to the rotary community. One hit wonders? He may have not made his record pass back to back but at least he did it on 4 other occassions. What about Sporty and ML? Are you saying they are one hit wonders too? Because last time I checked they havent backed up their times either.
Yes, I have seen you and Cris come off real cocky, but that doesn't bother me. I have not asked any questions to Crispeed on my setup because I know he would pretty much shine me off because I have seen him do it to others that have asked simple questions on his exhaust set up etc.
What's with all the big secrets in the rotary community? I don't get it. You don't see it in VW's, V8's, Honda's etc., but when it comes to Rotaries everyone wants to keep it hush hush. No wonder we are 10 years behind everyone else.
11-14-08, 12:43 AM
#819
InsaneRotaries.com
* Fixed*
I think I'll have to break it down for you since your attention span is very short. By the term "has been" I mean he no longer races and his time was back then, not now. Last year a video was made saying he had his problems sorted out and he was done testing, ready to race but.... The squeeky wheel makes the most noise.
When have you seen me come off cocky? I may have a big ****, but I certainly don't act like i do!! You automatically assume that Chris would shine you off, how ******* pathetic is that.... You choose not to ask for help because you are bad minded and automatically thought everyone else thinks the same as you... but you are wrong my friend. I bet if your question was logical, you would have gotten an answer.
Bro, no one is going to hand over years of R&D for free, BUT they will help you get started and on the right track... These guys have a business to run, why should he spoon feed you when he's not getting anything out of it. The competition is lurking around the forums to see who is doing what, so why should he give out info about his setup?? It may sound like something simple, but some guys spend $1000's just to make a few extra ponies so forgive them if he don't wanna talk. It's all about you and what everyone can do for you.. Have you ever sent another user a PM just to say "whats up" or pass along info or news that might be of interest?? Alot of us on here share info outside of the forum on a daily basis, whether it be IM's or Emails.. If Allen asked me for a favor, I would not hesitate to help, why? Because we have a good friendship outside of all this BS thats written on the forum..
You drag race rotarys are you still don't know what the big secret is??
We are a very small community where every extra bit of horsepower & reliability helps, so we cannot afford to have that info leaked on the world wide web. Remember that guys spent many years and loads of cash to get to where they are today, so why should they just give out that info for free?? You wanna know why I don't talk about my cars or post pics?? Because I don't want you or anyone else to copy my ideas. I will post just the right amount of info to keep you informed, but not educated.. Not everything I do in my garage gets posted on the net
I will lift up anyone that is doing wonders in the rotary world, not just PR... It don't matter if you're from Australia or Africa, I give credit where its due
I write alot of good stuff on GRS and sometimes I may get 1 reply but that don't bother me. Why should you get upset and throw a hissy fit when Chris or me don't reply in your thread. Be a man!!!
Not all of us are post ******. I don't reply to every post I visit, maybe thats why I have a low post count compared to you.
This is my last reply on this matter... Go buy a bottel of wine, put your kid to sleep and relieve some of your frustration in the bedroom....not on the forum!!!
Peace
*Woosa
There you go again talking **** on Abel. Has been? He has been racing rotaries and has been competetive throughout his long career and has given alot to the rotary community. One hit wonders? He may have not made his record pass back to back but at least he did it on 4 other occassions. What about Sporty and ML? Are you saying they are one hit wonders too? Because last time I checked they havent backed up their times either.
Yes, I have seen you and Cris come off real cocky, but that doesn't bother me. I have not asked any questions to Crispeed on my setup because I know he would pretty much shine me off because I have seen him do it to others that have asked simple questions on his exhaust set up etc.
Bro, no one is going to hand over years of R&D for free, BUT they will help you get started and on the right track... These guys have a business to run, why should he spoon feed you when he's not getting anything out of it. The competition is lurking around the forums to see who is doing what, so why should he give out info about his setup?? It may sound like something simple, but some guys spend $1000's just to make a few extra ponies so forgive them if he don't wanna talk. It's all about you and what everyone can do for you.. Have you ever sent another user a PM just to say "whats up" or pass along info or news that might be of interest?? Alot of us on here share info outside of the forum on a daily basis, whether it be IM's or Emails.. If Allen asked me for a favor, I would not hesitate to help, why? Because we have a good friendship outside of all this BS thats written on the forum..
What's with all the big secrets in the rotary community? I don't get it. You don't see it in VW's, V8's, Honda's etc., but when it comes to Rotaries everyone wants to keep it hush hush. No wonder we are 10 years behind everyone else.
We are a very small community where every extra bit of horsepower & reliability helps, so we cannot afford to have that info leaked on the world wide web. Remember that guys spent many years and loads of cash to get to where they are today, so why should they just give out that info for free?? You wanna know why I don't talk about my cars or post pics?? Because I don't want you or anyone else to copy my ideas. I will post just the right amount of info to keep you informed, but not educated.. Not everything I do in my garage gets posted on the net
I will lift up anyone that is doing wonders in the rotary world, not just PR... It don't matter if you're from Australia or Africa, I give credit where its due
I write alot of good stuff on GRS and sometimes I may get 1 reply but that don't bother me. Why should you get upset and throw a hissy fit when Chris or me don't reply in your thread. Be a man!!!
Not all of us are post ******. I don't reply to every post I visit, maybe thats why I have a low post count compared to you.
This is my last reply on this matter... Go buy a bottel of wine, put your kid to sleep and relieve some of your frustration in the bedroom....not on the forum!!!
Peace
*Woosa
Last edited by RoTaRyBoYz; 11-14-08 at 12:49 AM.
11-14-08, 09:58 PM
#820
Junior Member
Join Date: May 2005
Location: riverside ca
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
jay dont waste your words any more thanks. if these guys think i am a one hit wonder then they are new to the scene and dont know a thing . if i am not racing its because i am not a millionare and dont have thousands to waste everytime i go out ,unlike my competitors that are true millionares. once i went on a 20plus race winning streak that included every pr racer out there but that was then and now is now. also they dont know how i have personally helped pr racers, austarlian racers, japanese racers and even some celebreties,mazda corporate with performance development, for years my cell phone would not stop ringing everyday all day on me helping strangers out. soon you will see me at irwindale gettting the rust off myself. then later the facts and only the facts will speak for themselves records and accoplishments dont come in a cracker jack box but are done with knowledge money and above all alot of hard work and sacrafice. this will probably be my last post here good luck to all and NEVER COUNT ME OUT AT ANYTHING I DO
abel
abel
Last edited by abelrx8; 11-14-08 at 10:04 PM.
11-15-08, 03:57 PM
#821
Here's my last statement on this:
I think I'll have to break it down for you since your attention span is very short. By the term "has been" I mean he no longer races and his time was back then, not now. Last year a video was made saying he had his problems sorted out and he was done testing, ready to race but.... The squeeky wheel makes the most noise.
When have you seen me come off cocky? I may have a big ****, but I certainly don't act like i do!! You automatically assume that Chris would shine you off, how ******* pathetic is that.... You choose not to ask for help because you are bad minded and automatically thought everyone else thinks the same as you... but you are wrong my friend. I bet if your question was logical, you would have gotten an answer.
Bro, no one is going to hand over years of R&D for free, BUT they will help you get started and on the right track... These guys have a business to run, why should he spoon feed you when he's not getting anything out of it. The competition is lurking around the forums to see who is doing what, so why should he give out info about his setup?? It may sound like something simple, but some guys spend $1000's just to make a few extra ponies so forgive them if he don't wanna talk. It's all about you and what everyone can do for you.. Have you ever sent another user a PM just to say "whats up" or pass along info or news that might be of interest?? Alot of us on here share info outside of the forum on a daily basis, whether it be IM's or Emails.. If Allen asked me for a favor, I would not hesitate to help, why? Because we have a good friendship outside of all this BS thats written on the forum..
Sometimes yes you do come of cocky but that comes with racing and pride and that's all fine and really doesn't bother me. You obviously have your issues with Abel for your own reasons but he has done many great things with the rotary and has helped many people out- Keep it to yourself or take it up with him in pm's. You dont see me talking trash on other racers.
As far as asking Crispeed for advise, I have never asked him or pm'd him because I have my own peeps that help me out just like you guys do. I know he has alot of wisdom and I don't expect him to spill the beans on the internet but I do think that he and a few others could tell more. Ex. Judge Ito, he has told many secrets and has posted on the web for those that don't have the money to spend on R&D like me.
You drag race rotarys are you still don't know what the big secret is??
We are a very small community where every extra bit of horsepower & reliability helps, so we cannot afford to have that info leaked on the world wide web. Remember that guys spent many years and loads of cash to get to where they are today, so why should they just give out that info for free?? You wanna know why I don't talk about my cars or post pics?? Because I don't want you or anyone else to copy my ideas. I will post just the right amount of info to keep you informed, but not educated.. Not everything I do in my garage gets posted on the net
What could you do or have done to your cars that anyone would want to copy and havent' already seen yet?...... please....... that's an example of how you come off cocky. You ain't competing or racing anyway so WTF do you care if someone copies your alternator mount.
I will lift up anyone that is doing wonders in the rotary world, not just PR... It don't matter if you're from Australia or Africa, I give credit where its due
I write alot of good stuff on GRS and sometimes I may get 1 reply but that don't bother me. Why should you get upset and throw a hissy fit when Chris or me don't reply in your thread. Be a man!!!
Not all of us are post ******. I don't reply to every post I visit, maybe thats why I have a low post count compared to you.
This is my last reply on this matter... Go buy a bottel of wine, put your kid to sleep and relieve some of your frustration in the bedroom....not on the forum!!!
Yes, you do post a lot of good info and thanks for that. And yes I have helped or have tried to help many people out too. You said you wanted the templates for the brackets that I had made and I told you to send me a pm so that I could mail them to you. I am also done on this topic.
Cheers.
Peace
*Woosa[/QUOTE]
I think I'll have to break it down for you since your attention span is very short. By the term "has been" I mean he no longer races and his time was back then, not now. Last year a video was made saying he had his problems sorted out and he was done testing, ready to race but.... The squeeky wheel makes the most noise.
When have you seen me come off cocky? I may have a big ****, but I certainly don't act like i do!! You automatically assume that Chris would shine you off, how ******* pathetic is that.... You choose not to ask for help because you are bad minded and automatically thought everyone else thinks the same as you... but you are wrong my friend. I bet if your question was logical, you would have gotten an answer.
Bro, no one is going to hand over years of R&D for free, BUT they will help you get started and on the right track... These guys have a business to run, why should he spoon feed you when he's not getting anything out of it. The competition is lurking around the forums to see who is doing what, so why should he give out info about his setup?? It may sound like something simple, but some guys spend $1000's just to make a few extra ponies so forgive them if he don't wanna talk. It's all about you and what everyone can do for you.. Have you ever sent another user a PM just to say "whats up" or pass along info or news that might be of interest?? Alot of us on here share info outside of the forum on a daily basis, whether it be IM's or Emails.. If Allen asked me for a favor, I would not hesitate to help, why? Because we have a good friendship outside of all this BS thats written on the forum..
Sometimes yes you do come of cocky but that comes with racing and pride and that's all fine and really doesn't bother me. You obviously have your issues with Abel for your own reasons but he has done many great things with the rotary and has helped many people out- Keep it to yourself or take it up with him in pm's. You dont see me talking trash on other racers.
As far as asking Crispeed for advise, I have never asked him or pm'd him because I have my own peeps that help me out just like you guys do. I know he has alot of wisdom and I don't expect him to spill the beans on the internet but I do think that he and a few others could tell more. Ex. Judge Ito, he has told many secrets and has posted on the web for those that don't have the money to spend on R&D like me.
You drag race rotarys are you still don't know what the big secret is??
We are a very small community where every extra bit of horsepower & reliability helps, so we cannot afford to have that info leaked on the world wide web. Remember that guys spent many years and loads of cash to get to where they are today, so why should they just give out that info for free?? You wanna know why I don't talk about my cars or post pics?? Because I don't want you or anyone else to copy my ideas. I will post just the right amount of info to keep you informed, but not educated.. Not everything I do in my garage gets posted on the net
What could you do or have done to your cars that anyone would want to copy and havent' already seen yet?...... please....... that's an example of how you come off cocky. You ain't competing or racing anyway so WTF do you care if someone copies your alternator mount.
I will lift up anyone that is doing wonders in the rotary world, not just PR... It don't matter if you're from Australia or Africa, I give credit where its due
I write alot of good stuff on GRS and sometimes I may get 1 reply but that don't bother me. Why should you get upset and throw a hissy fit when Chris or me don't reply in your thread. Be a man!!!
Not all of us are post ******. I don't reply to every post I visit, maybe thats why I have a low post count compared to you.
This is my last reply on this matter... Go buy a bottel of wine, put your kid to sleep and relieve some of your frustration in the bedroom....not on the forum!!!
Yes, you do post a lot of good info and thanks for that. And yes I have helped or have tried to help many people out too. You said you wanted the templates for the brackets that I had made and I told you to send me a pm so that I could mail them to you. I am also done on this topic.
Cheers.
Peace
*Woosa[/QUOTE]
11-15-08, 11:05 PM
#822
E85+Boost+Rx2=zoom zoom
iTrader: (2)
Join Date: Oct 2004
Location: Long Island NY
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
What could you do or have done to your cars that anyone would want to copy and havent' already seen yet?...... please....... that's an example of how you come off cocky. You ain't competing or racing anyway so WTF do you care if someone copies your alternator mount.
HAHAHA
HAHAHA
11-16-08, 12:42 AM
#823
InsaneRotaries.com
Just to end this topic, I will agree with your logic... You are 100% correct
