Rotary Drag Racing The place to post your racing stories and info

Montgomery IFO results.

Thread Tools
 
Search this Thread
 
Old 05-23-11 | 12:56 AM
  #1  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Montgomery IFO results.

So I didnt get my 9sec slip but won the class. So it was a good day for the rotary's (Roan-Bacon-me and BNR). Never got one clean pass in, I suck!

Crazy day.

1st pass (qualifying pass) blow map sensor vac line off after shift to 4th 10.3 @ 120 thought I lost the motor ()

2nd pass (1st round of elimination) Shift 1st-2nd back to 1st! 10.7 @135

3rd pass (2nd round) hit all gears fine but spun past 330ft mark 10.4 @138

4th pass (finals) me and BNR. More issues! Thought I lost a motor for the 2nd time of the day. Shift to 4th and a seal stuck! Car started breaking up so shut it down. 10.5 @124
After getting on return lane rev'ed the **** out of it and seal came back and all is fine again.

The track was so BAD! All my 60's were high 1.5's to 1.6's. I was off by .4 every pass at the 330 mark and .3-.5 on 1/8th mile. Tried free rev's, 2 step, lower tire presure and nothing worked.

City temp was 95 degree's and track temp was 140 with 100% humidity! Freaken HOT!

I have serious boost issues, was running in guessing zone since I am on a GM 3 bar and it was pegged at 2.18 bars. Afr's were crazy high 12.2's-12.3's. This motor has taken a serious beating for the last 3 years now. Going to run a comp. test this week to make sure all is good.

I know without a doubt it will go high 9's with hooking track, decent weather and another driver..
Attached Thumbnails Montgomery IFO results.-dsc00394.jpg  
Old 05-23-11 | 01:03 AM
  #2  
ultimatejay's Avatar
Eats, Sleeps, Dreams Rotary

iTrader: (1)
 
Joined: Nov 2006
Posts: 4,148
Likes: 4
From: California
Congrats, that's awesome! Don't worry, I had the same issues with my track last time.

How the heck do you shift from second to first?
Old 05-23-11 | 01:07 AM
  #3  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Originally Posted by ultimatejay
Congrats, that's awesome! Don't worry, I had the same issues with my track last time.

How the heck do you shift from second to first?
That tranny let's you hit any gear on up shifts. I got a lock out being made now for 5th and reverse so shouldn't be an issue anymore. Funny thing is when liberty built it they suggested I get a lockout or make myself. I didn't think it would be an issue but that's three times now!
Old 05-23-11 | 06:38 AM
  #4  
Bacon's Avatar
IRS 4 Life
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
COngrats on the win!!!! Holly crap you had it hot, it was chilly up here

Not tht its gonna make you feel any better but on my 2nd run I completley missed 3rd (like it didnt even go in enough to grind) let out the clutch and was like DOOH lol still clicked off a 11.0

Hope the Motors aight, mine started acting funny having low Vac, shitty idle, wanting to stall, swapped plugs (the ones i pulled were fine just a dusting of carbon) and she was back to brand new....

Not sure what fuel/ plugs your runnign, but im finding with the EGV's/c16 i need to wire brush/replace every 8-10 passes
Old 05-23-11 | 07:43 AM
  #5  
ErnieT's Avatar
Living life 9 seconds at a time
iTrader: (2)
 
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Congrats on your win! Being out there and staying consistant is what its all about. You'll hit 9's in no time.
Old 05-23-11 | 08:25 AM
  #6  
C. Ludwig's Avatar
www.lms-efi.com
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,242
Likes: 137
From: Floyds Knobs. IN
Originally Posted by sk8world
That tranny let's you hit any gear on up shifts. I got a lock out being made now for 5th and reverse so shouldn't be an issue anymore. Funny thing is when liberty built it they suggested I get a lockout or make myself. I didn't think it would be an issue but that's three times now!

Will the lock out be able to be used on any stock FD trans, or just the Liberty modified ones?
Old 05-23-11 | 10:41 AM
  #7  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Originally Posted by C. Ludwig
Will the lock out be able to be used on any stock FD trans, or just the Liberty modified ones?

fd trans. If you need on contact Ray Wilson asap as I am sure it would be easier for him to make a few at a time rather then just one for me.
Old 05-23-11 | 11:09 AM
  #8  
Herblenny's Avatar
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
 
Joined: Nov 2001
Posts: 13,597
Likes: 5
From: Alabama
Mike, only race I got to see was the last one with you and Bryan..

I have to say, it was freaking HOT yesterday!! Also, thanks for honking at me as you passed by during my pull over with the cops I got pulled over going close to 80 on 45/55.. Luckily the cop is a new FD owner and wanted to check out the car...
Old 05-23-11 | 11:15 AM
  #9  
C. Ludwig's Avatar
www.lms-efi.com
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,242
Likes: 137
From: Floyds Knobs. IN
Originally Posted by sk8world
fd trans. If you need on contact Ray Wilson asap as I am sure it would be easier for him to make a few at a time rather then just one for me.

Ahhh. I was under the impression it was coming from Liberty. Thanks for the info.
Old 05-23-11 | 11:18 AM
  #10  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Hahaha.. I saw the lights from far away, told my bro I bet the cops got some young kid in his honda showing off.. Then saw it was you in a serious conversation. I figured you were trying to talk your way out! Guess it worked..

Good seeing you and sorry I didn't have more time to talk but they were rolling us thru. My passes were less then an hour apart.
Old 05-23-11 | 11:22 AM
  #11  
blitzboy's Avatar
Senior Member

 
Joined: Nov 2004
Posts: 383
Likes: 0
From: England
Good result and nice an low 10 second passes !!!!!

I use the Stillway 0-400 shifter which has a lock out mech once you done the 1st to 2nd shift, so you can not select 1st or 5th or reverse only 3rd and 4th

You drop the collar on the shifter to use the gates, and lift the collar and twist onto a stop to lift the colum out of the gate for normal shifts on the road

Name:  DSCF1346.jpg
Views: 219
Size:  62.1 KB
Name:  DSCF1348.jpg
Views: 176
Size:  78.7 KB
Name:  DSCF1350.jpg
Views: 161
Size:  77.6 KB
Name:  DSCF1351.jpg
Views: 197
Size:  80.3 KB
Name:  DSCF1352.jpg
Views: 149
Size:  72.9 KB
Old 05-23-11 | 11:24 AM
  #12  
blitzboy's Avatar
Senior Member

 
Joined: Nov 2004
Posts: 383
Likes: 0
From: England
Name:  DSCF1357.jpg
Views: 183
Size:  62.7 KB
Name:  DSCF1363.jpg
Views: 125
Size:  61.3 KB
Name:  DSCF1371.jpg
Views: 130
Size:  75.9 KB
Old 05-23-11 | 02:02 PM
  #13  
Indian's Avatar
It wasn't me!!
iTrader: (1)
 
Joined: May 2004
Posts: 1,189
Likes: 0
From: Cayman Islands
need to get one of those blitzboy
Old 05-23-11 | 09:02 PM
  #14  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
****.. I spent the day online searching for one ... good luck finding one to anyone that wants one.
Old 05-23-11 | 09:34 PM
  #15  
vincentrx7's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2005
Posts: 319
Likes: 0
From: St. Simons Island, Georgia
Mike,
Congratulations! I looked for you at DGRR....That was my Nephew with the silver GTR at IFO. He lost to Bryan in the 1/4 finals on the tree. His best time in good weather is a 10.6. Paul at Liberty said I should have my trans by the end of the month. It will be identical to yours. I already build a lock out for 5th/R for my other Liberty trans. Anyway, congrats to you and all the rotary guys..
Old 05-23-11 | 09:37 PM
  #16  
vincentrx7's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2005
Posts: 319
Likes: 0
From: St. Simons Island, Georgia
Originally Posted by Herblenny
Mike, only race I got to see was the last one with you and Bryan..

I have to say, it was freaking HOT yesterday!! Also, thanks for honking at me as you passed by during my pull over with the cops I got pulled over going close to 80 on 45/55.. Luckily the cop is a new FD owner and wanted to check out the car...
Phil,
Did you win the car show? Great job with GDRR by the way.
Old 05-23-11 | 11:00 PM
  #17  
7passu's Avatar
supra7
iTrader: (10)
 
Joined: Nov 2004
Posts: 414
Likes: 0
From: Mississippi
I enjoyed watching the 2 7s go at it in the finals...that 1st gen would get down pretty good...just would hop right off the line. And very clean car sk8. ..like ur ignition set up and how nice the car is!
Old 05-24-11 | 12:27 AM
  #18  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Originally Posted by vincentrx7
Mike,
Congratulations! I looked for you at DGRR....That was my Nephew with the silver GTR at IFO. He lost to Bryan in the 1/4 finals on the tree. His best time in good weather is a 10.6. Paul at Liberty said I should have my trans by the end of the month. It will be identical to yours. I already build a lock out for 5th/R for my other Liberty trans. Anyway, congrats to you and all the rotary guys..
Thanks Bobby! So how did you do the lock out? Any pics?
Old 05-24-11 | 01:22 AM
  #19  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Video of final run.



http://www.youtube.com/watch?v=4qRP7...e_gdata_player
Old 05-24-11 | 03:40 AM
  #20  
Indian's Avatar
It wasn't me!!
iTrader: (1)
 
Joined: May 2004
Posts: 1,189
Likes: 0
From: Cayman Islands
Great run Mike...
Old 05-24-11 | 05:20 PM
  #21  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Thanks man!

Watch the video at the 31 second mark a guy in the back gets hit by a rock in face! I cant believe they let all these kids hang out in those areas!

Also looking back at my logs last night. The last pass (this video) my IAT's were in the 50's or so before start, at the end of the track they were in the 80's! My water temp was in the 90's before the lights went down. I am telling you it was freaken HOT! I will never race in that weather again. Not that I cant hack it but damage to the car that can acure.
Old 05-24-11 | 05:30 PM
  #22  
Indian's Avatar
It wasn't me!!
iTrader: (1)
 
Joined: May 2004
Posts: 1,189
Likes: 0
From: Cayman Islands
hey Mike.. did you engage your line lock(half and half) at 0.52-53?
Old 05-24-11 | 06:07 PM
  #23  
sk8world's Avatar
Thread Starter
Chasing numbers
iTrader: (5)
 
Joined: Apr 2001
Posts: 5,097
Likes: 4
From: Alabama
Originally Posted by Indian
hey Mike.. did you engage your line lock(half and half) at 0.52-53?


yes. I try and set it just enough to keep me from rolling the beem. I set it too much that time and didnt want to slip my clucth that much to stage so I turned it off and staged with e brake only. Must have a little chatter on clutch as it kept rolling after revs came up and made me deep stage , almost lite the red bulb!
Old 05-24-11 | 06:57 PM
  #24  
C. Ludwig's Avatar
www.lms-efi.com
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,242
Likes: 137
From: Floyds Knobs. IN
Nice run! You and the car are looking great!

Can't believe they let people hang on the wall like that. There is a guy sitting on the wall at or after the starting line. Homeboy is dumb!
Old 05-24-11 | 07:38 PM
  #25  
Bacon's Avatar
IRS 4 Life
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
Originally Posted by C. Ludwig
Can't believe they let people hang on the wall like that.
I was thinking the same thing, and that they let you click off time slips like that in a Tshirt!

Atco has a 6ft chainlink fecne to impeede your view/taping the runs for normal spectators LOL

E-town is much nicer, no chainlink fence, but the wall is back further


Quick Reply: Montgomery IFO results.



All times are GMT -5. The time now is 01:15 PM.