M&W Ignition....Where to buy??
11-29-09, 04:17 PM
#1
Living life 9 seconds at a time
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
M&W Ignition....Where to buy??
Hey guys. Im goin with a full M&W over the winter, but does anyone know where I can buy it local? Im gonna get the Pro Drag 4R cdi and coils. I've been doin some research and it seems to be one of the best out there.
Thanks,
Ernie
Thanks,
Ernie
11-29-09, 04:30 PM
#2
Ernie,
That's what i'm running.. I can get you one but it's a very special unit and most don't carry's it in stock. They will have to come straight from Aussie. Not bad though usually takes about 1~2 weeks tops..
BTW so you know. The M&W Pro Drag Rotary cdi will only fire with a -VE/falling edge.
This is the same edge that fires an autronic cdi. Just figured i'd throw that out there since you couldn't get the autronic to work..
That's what i'm running.. I can get you one but it's a very special unit and most don't carry's it in stock. They will have to come straight from Aussie. Not bad though usually takes about 1~2 weeks tops..
BTW so you know. The M&W Pro Drag Rotary cdi will only fire with a -VE/falling edge.
This is the same edge that fires an autronic cdi. Just figured i'd throw that out there since you couldn't get the autronic to work..
11-29-09, 04:57 PM
#3
Living life 9 seconds at a time
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Ernie,
That's what i'm running.. I can get you one but it's a very special unit and most don't carry's it in stock. They will have to come straight from Aussie. Not bad though usually takes about 1~2 weeks tops..
BTW so you know. The M&W Pro Drag Rotary cdi will only fire with a -VE/falling edge.
This is the same edge that fires an autronic cdi. Just figured i'd throw that out there since you couldn't get the autronic to work..
That's what i'm running.. I can get you one but it's a very special unit and most don't carry's it in stock. They will have to come straight from Aussie. Not bad though usually takes about 1~2 weeks tops..
BTW so you know. The M&W Pro Drag Rotary cdi will only fire with a -VE/falling edge.
This is the same edge that fires an autronic cdi. Just figured i'd throw that out there since you couldn't get the autronic to work..
You still have that Motec for sale?? 
11-30-09, 05:29 AM
#6
ErnieT, I get alot of these setups and usually have them in 3 days,email me if you need one asap.
curranbrothersracing@xtra.co.nz
cheers
brent
curranbrothersracing@xtra.co.nz
cheers
brent
11-30-09, 05:33 AM
#7
It wasn't me!!
iTrader: (1)
Join Date: May 2004
Location: Cayman Islands
Posts: 1,189
Likes: 0
Received 0 Likes
on
0 Posts
isn't the Pro Drag M&W only for Drag? Thought it over heated after staying all for long periods of time... I mean, if your going only to be a drag car then your good.
Trending Topics
11-30-09, 08:41 PM
#11
Full Member
Join Date: Nov 2006
Location: ???
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
12-01-09, 01:58 PM
#14
InsaneRotaries.com
If you guys wanna do a GB let me know.. I'm getting the 4R for $200 less than retail and the coils for $40 less than retail. They are in-stock, so you can get it in 4-5 business days
12-01-09, 04:03 PM
#17
Emailed M&W about setting up the Drag box like Enzo suggested as I'd never heard of those boxes being able to do what he's saying. The documentation they ship with the boxes doesn't mention it. They do mention dual power modes and the pinouts support this with some of their other boxes.
What M&W told me was that they can build the box to do what Enzo is suggesting but the standard, off the shelf Drag boxes do not support dual output operation. The company line is that the standard Drag box "was never designed for high duty cycle operation to keep it’s size small". Meaning the standard Drag box is for limited duty use only.
I would guess that Enzo knows how to make the correct modifications to the off the shelf boxes or would supply one that M&W has setup as such. Just want the average Joe-price-shopper to be aware that if you order an off the shelf Drag specific box it's not going to have provisions for dual power operation out of the box. Either talk to Enzo directly or make sure your retailer knows what you want and is supplying you with the correct part.
What M&W told me was that they can build the box to do what Enzo is suggesting but the standard, off the shelf Drag boxes do not support dual output operation. The company line is that the standard Drag box "was never designed for high duty cycle operation to keep it’s size small". Meaning the standard Drag box is for limited duty use only.
I would guess that Enzo knows how to make the correct modifications to the off the shelf boxes or would supply one that M&W has setup as such. Just want the average Joe-price-shopper to be aware that if you order an off the shelf Drag specific box it's not going to have provisions for dual power operation out of the box. Either talk to Enzo directly or make sure your retailer knows what you want and is supplying you with the correct part.
12-01-09, 06:42 PM
#18
You are correct..
Hence the reason why i'm saying it takes time to get them direct from australia..
But the Joe-price-shopper's could get them from many of the internet ***** house's that stock them and maybe even use them and will support them too..
Hence the reason why i'm saying it takes time to get them direct from australia..
But the Joe-price-shopper's could get them from many of the internet ***** house's that stock them and maybe even use them and will support them too..
12-14-09, 07:02 PM
#20
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
I'm surprised you can get the pro drag in 3 weeks. It took me 8 weeks to get mine and that was last year. Mine is still sitting in the box waiting to get install
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
