Drag racing last night vid
#26
Right on. Did you come up to me? I'm sorry, I'm very bad with names.
Thanks Allen, I was thinking about going that route as it's more in my budget.
If you car is strictly a drag car then send your gearset to liberty's and have them do the face engagement mod. The reason most people with turbo cars don't mess with the factory box if for strength reasons but you don't have to worry about that. IIRC the mod is only like $75-$100 per gear. That would cure all your problems without having to buy a $5000+ transmission.
#27
7s before paint!!!
iTrader: (2)
As far as i know it can be done on any transmission. A few of the old school guys have done some crazy stuff with TII transmissions in the past. I know of one who even put a V-gate external rail shifter on a TII transmission. As for the fluid, the weight is the most important part. I don't think switching from Redline to Royal Purple will help any because they are both replacements for ATF in manual transmissions and are both 10W. In jays situation is a combination of an engine with a heavy flywheel that doesn't decelerate very fast and a transmission with warn synchronizers that don't have enough grip to accelerate the gearset. By going with the face plate engagement the dogs will mesh no matter the RPM differential. The only downsides are that you have to shift briskly all the time and you have to RPM match to downshift.
http://www.libertysgears.com/faceplate.htm
http://www.libertysgears.com/faceplate.htm
#28
why you can try the mazda b2600 tranny ( it has to be mazda engine) is the same of turbo II but better gear's for all motor or nitrous.. just try i know a legeng in rotary in P.R. that use it long time ago, and it work. but you has to get the right gear.
goog luck
goog luck
#29
Banned. I got OWNED!!!
iTrader: (5)
Join Date: Nov 2008
Location: Los Angeles
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I was one of the guys that came up and was staring in awe as you made some adjustments and left the parking lot. You looked like you were in a hurry so we didn't bother you.
#30
Oh ok. I'm sorry, I had to adjust my fuel pressure. It was only reading 3psi and was going to make a jet change but I wanted to get one last run in before my wife had enough and was in a big hurry. Next time come up and introduce yourself. I'm always eager to meet new rotor friends.
#31
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
Oh ok. I'm sorry, I had to adjust my fuel pressure. It was only reading 3psi and was going to make a jet change but I wanted to get one last run in before my wife had enough and was in a big hurry. Next time come up and introduce yourself. I'm always eager to meet new rotor friends.
#32
Rotary Freak
jay at this point your power to weight ratio is almost tapped out. if you want to improve your e.t. your gonna have to become a little more efficient as a driver.. find a way to get those shifts in without letting of the gas.. let's go dude you just got a little 12A all motor. you could do it!!! your rx2 has about 3 tenths lost in your shifting style. with some better shifting you should be at 7.5 in the 1/8. jay look at it this way.. like squeezing an orange for it's last drop. you gotta squeeze!!! that 12A
#33
jay at this point your power to weight ratio is almost tapped out. if you want to improve your e.t. your gonna have to become a little more efficient as a driver.. find a way to get those shifts in without letting of the gas.. let's go dude you just got a little 12A all motor. you could do it!!! your rx2 has about 3 tenths lost in your shifting style. with some better shifting you should be at 7.5 in the 1/8. jay look at it this way.. like squeezing an orange for it's last drop. you gotta squeeze!!! that 12A
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM